ViewVC Help
View File | Revision Log | Show Annotations | View Changeset | Root Listing
root/OpenMD/trunk/src/brains/SimCreator.cpp
Revision: 1976
Committed: Wed Mar 12 20:01:15 2014 UTC (11 years, 1 month ago) by gezelter
File size: 35457 byte(s)
Log Message:
Revision string moves to its own cpp file that is compiled, and out of a 
defined string.  This will make it a bit easier to migrate to git when 
the time comes.

File Contents

# Content
1 /*
2 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3 *
4 * The University of Notre Dame grants you ("Licensee") a
5 * non-exclusive, royalty free, license to use, modify and
6 * redistribute this software in source and binary code form, provided
7 * that the following conditions are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 *
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the
15 * distribution.
16 *
17 * This software is provided "AS IS," without a warranty of any
18 * kind. All express or implied conditions, representations and
19 * warranties, including any implied warranty of merchantability,
20 * fitness for a particular purpose or non-infringement, are hereby
21 * excluded. The University of Notre Dame and its licensors shall not
22 * be liable for any damages suffered by licensee as a result of
23 * using, modifying or distributing the software or its
24 * derivatives. In no event will the University of Notre Dame or its
25 * licensors be liable for any lost revenue, profit or data, or for
26 * direct, indirect, special, consequential, incidental or punitive
27 * damages, however caused and regardless of the theory of liability,
28 * arising out of the use of or inability to use software, even if the
29 * University of Notre Dame has been advised of the possibility of
30 * such damages.
31 *
32 * SUPPORT OPEN SCIENCE! If you use OpenMD or its source code in your
33 * research, please cite the appropriate papers when you publish your
34 * work. Good starting points are:
35 *
36 * [1] Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).
37 * [2] Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).
38 * [3] Sun, Lin & Gezelter, J. Chem. Phys. 128, 234107 (2008).
39 * [4] Kuang & Gezelter, J. Chem. Phys. 133, 164101 (2010).
40 * [5] Vardeman, Stocker & Gezelter, J. Chem. Theory Comput. 7, 834 (2011).
41 */
42
43 /**
44 * @file SimCreator.cpp
45 * @author tlin
46 * @date 11/03/2004
47 * @version 1.0
48 */
49
50 #ifdef IS_MPI
51 #include "mpi.h"
52 #include "math/ParallelRandNumGen.hpp"
53 #endif
54
55 #include <exception>
56 #include <iostream>
57 #include <sstream>
58 #include <string>
59
60 #include "brains/MoleculeCreator.hpp"
61 #include "brains/SimCreator.hpp"
62 #include "brains/SimSnapshotManager.hpp"
63 #include "io/DumpReader.hpp"
64 #include "brains/ForceField.hpp"
65 #include "utils/simError.h"
66 #include "utils/StringUtils.hpp"
67 #include "utils/Revision.hpp"
68 #include "math/SeqRandNumGen.hpp"
69 #include "mdParser/MDLexer.hpp"
70 #include "mdParser/MDParser.hpp"
71 #include "mdParser/MDTreeParser.hpp"
72 #include "mdParser/SimplePreprocessor.hpp"
73 #include "antlr/ANTLRException.hpp"
74 #include "antlr/TokenStreamRecognitionException.hpp"
75 #include "antlr/TokenStreamIOException.hpp"
76 #include "antlr/TokenStreamException.hpp"
77 #include "antlr/RecognitionException.hpp"
78 #include "antlr/CharStreamException.hpp"
79
80 #include "antlr/MismatchedCharException.hpp"
81 #include "antlr/MismatchedTokenException.hpp"
82 #include "antlr/NoViableAltForCharException.hpp"
83 #include "antlr/NoViableAltException.hpp"
84
85 #include "types/DirectionalAdapter.hpp"
86 #include "types/MultipoleAdapter.hpp"
87 #include "types/EAMAdapter.hpp"
88 #include "types/SuttonChenAdapter.hpp"
89 #include "types/PolarizableAdapter.hpp"
90 #include "types/FixedChargeAdapter.hpp"
91 #include "types/FluctuatingChargeAdapter.hpp"
92
93
94 namespace OpenMD {
95
96 Globals* SimCreator::parseFile(std::istream& rawMetaDataStream, const std::string& filename, int mdFileVersion, int startOfMetaDataBlock ){
97 Globals* simParams = NULL;
98 try {
99
100 // Create a preprocessor that preprocesses md file into an ostringstream
101 std::stringstream ppStream;
102 #ifdef IS_MPI
103 int streamSize;
104 const int masterNode = 0;
105
106 if (worldRank == masterNode) {
107 MPI_Bcast(&mdFileVersion, 1, MPI_INT, masterNode, MPI_COMM_WORLD);
108 // MPI::COMM_WORLD.Bcast(&mdFileVersion, 1, MPI::INT, masterNode);
109 #endif
110 SimplePreprocessor preprocessor;
111 preprocessor.preprocess(rawMetaDataStream, filename,
112 startOfMetaDataBlock, ppStream);
113
114 #ifdef IS_MPI
115 //broadcasting the stream size
116 streamSize = ppStream.str().size() +1;
117 MPI_Bcast(&streamSize, 1, MPI_INT, masterNode, MPI_COMM_WORLD);
118 MPI_Bcast(static_cast<void*>(const_cast<char*>(ppStream.str().c_str())),
119 streamSize, MPI_CHAR, masterNode, MPI_COMM_WORLD);
120
121 // MPI::COMM_WORLD.Bcast(&streamSize, 1, MPI::LONG, masterNode);
122 // MPI::COMM_WORLD.Bcast(static_cast<void*>(const_cast<char*>(ppStream.str().c_str())),
123 // streamSize, MPI::CHAR, masterNode);
124
125 } else {
126
127 MPI_Bcast(&mdFileVersion, 1, MPI_INT, masterNode, MPI_COMM_WORLD);
128 // MPI::COMM_WORLD.Bcast(&mdFileVersion, 1, MPI::INT, masterNode);
129
130 //get stream size
131 MPI_Bcast(&streamSize, 1, MPI_INT, masterNode, MPI_COMM_WORLD);
132 // MPI::COMM_WORLD.Bcast(&streamSize, 1, MPI::LONG, masterNode);
133 char* buf = new char[streamSize];
134 assert(buf);
135
136 //receive file content
137 MPI_Bcast(buf, streamSize, MPI_CHAR, masterNode, MPI_COMM_WORLD);
138 // MPI::COMM_WORLD.Bcast(buf, streamSize, MPI::CHAR, masterNode);
139
140 ppStream.str(buf);
141 delete [] buf;
142 }
143 #endif
144 // Create a scanner that reads from the input stream
145 MDLexer lexer(ppStream);
146 lexer.setFilename(filename);
147 lexer.initDeferredLineCount();
148
149 // Create a parser that reads from the scanner
150 MDParser parser(lexer);
151 parser.setFilename(filename);
152
153 // Create an observer that synchorizes file name change
154 FilenameObserver observer;
155 observer.setLexer(&lexer);
156 observer.setParser(&parser);
157 lexer.setObserver(&observer);
158
159 antlr::ASTFactory factory;
160 parser.initializeASTFactory(factory);
161 parser.setASTFactory(&factory);
162 parser.mdfile();
163 // Create a tree parser that reads information into Globals
164 MDTreeParser treeParser;
165 treeParser.initializeASTFactory(factory);
166 treeParser.setASTFactory(&factory);
167 simParams = treeParser.walkTree(parser.getAST());
168 }
169
170
171 catch(antlr::MismatchedCharException& e) {
172 sprintf(painCave.errMsg,
173 "parser exception: %s %s:%d:%d\n",
174 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
175 painCave.isFatal = 1;
176 simError();
177 }
178 catch(antlr::MismatchedTokenException &e) {
179 sprintf(painCave.errMsg,
180 "parser exception: %s %s:%d:%d\n",
181 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
182 painCave.isFatal = 1;
183 simError();
184 }
185 catch(antlr::NoViableAltForCharException &e) {
186 sprintf(painCave.errMsg,
187 "parser exception: %s %s:%d:%d\n",
188 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
189 painCave.isFatal = 1;
190 simError();
191 }
192 catch(antlr::NoViableAltException &e) {
193 sprintf(painCave.errMsg,
194 "parser exception: %s %s:%d:%d\n",
195 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
196 painCave.isFatal = 1;
197 simError();
198 }
199
200 catch(antlr::TokenStreamRecognitionException& e) {
201 sprintf(painCave.errMsg,
202 "parser exception: %s %s:%d:%d\n",
203 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
204 painCave.isFatal = 1;
205 simError();
206 }
207
208 catch(antlr::TokenStreamIOException& e) {
209 sprintf(painCave.errMsg,
210 "parser exception: %s\n",
211 e.getMessage().c_str());
212 painCave.isFatal = 1;
213 simError();
214 }
215
216 catch(antlr::TokenStreamException& e) {
217 sprintf(painCave.errMsg,
218 "parser exception: %s\n",
219 e.getMessage().c_str());
220 painCave.isFatal = 1;
221 simError();
222 }
223 catch (antlr::RecognitionException& e) {
224 sprintf(painCave.errMsg,
225 "parser exception: %s %s:%d:%d\n",
226 e.getMessage().c_str(),e.getFilename().c_str(), e.getLine(), e.getColumn());
227 painCave.isFatal = 1;
228 simError();
229 }
230 catch (antlr::CharStreamException& e) {
231 sprintf(painCave.errMsg,
232 "parser exception: %s\n",
233 e.getMessage().c_str());
234 painCave.isFatal = 1;
235 simError();
236 }
237 catch (OpenMDException& e) {
238 sprintf(painCave.errMsg,
239 "%s\n",
240 e.getMessage().c_str());
241 painCave.isFatal = 1;
242 simError();
243 }
244 catch (std::exception& e) {
245 sprintf(painCave.errMsg,
246 "parser exception: %s\n",
247 e.what());
248 painCave.isFatal = 1;
249 simError();
250 }
251
252 simParams->setMDfileVersion(mdFileVersion);
253 return simParams;
254 }
255
256 SimInfo* SimCreator::createSim(const std::string & mdFileName,
257 bool loadInitCoords) {
258
259 const int bufferSize = 65535;
260 char buffer[bufferSize];
261 int lineNo = 0;
262 std::string mdRawData;
263 int metaDataBlockStart = -1;
264 int metaDataBlockEnd = -1;
265 int i, j;
266 streamoff mdOffset;
267 int mdFileVersion;
268
269 // Create a string for embedding the version information in the MetaData
270 std::string version;
271 version.assign("## Last run using OpenMD Version: ");
272 version.append(OPENMD_VERSION_MAJOR);
273 version.append(".");
274 version.append(OPENMD_VERSION_MINOR);
275
276 std::string svnrev(g_REVISION, strnlen(g_REVISION, 20));
277 //convert a macro from compiler to a string in c++
278 // STR_DEFINE(svnrev, SVN_REV );
279 version.append(" Revision: ");
280 // If there's no SVN revision, just call this the RELEASE revision.
281 if (!svnrev.empty()) {
282 version.append(svnrev);
283 } else {
284 version.append("RELEASE");
285 }
286
287 #ifdef IS_MPI
288 const int masterNode = 0;
289 if (worldRank == masterNode) {
290 #endif
291
292 std::ifstream mdFile_;
293 mdFile_.open(mdFileName.c_str(), ifstream::in | ifstream::binary);
294
295 if (mdFile_.fail()) {
296 sprintf(painCave.errMsg,
297 "SimCreator: Cannot open file: %s\n",
298 mdFileName.c_str());
299 painCave.isFatal = 1;
300 simError();
301 }
302
303 mdFile_.getline(buffer, bufferSize);
304 ++lineNo;
305 std::string line = trimLeftCopy(buffer);
306 i = CaseInsensitiveFind(line, "<OpenMD");
307 if (static_cast<size_t>(i) == string::npos) {
308 // try the older file strings to see if that works:
309 i = CaseInsensitiveFind(line, "<OOPSE");
310 }
311
312 if (static_cast<size_t>(i) == string::npos) {
313 // still no luck!
314 sprintf(painCave.errMsg,
315 "SimCreator: File: %s is not a valid OpenMD file!\n",
316 mdFileName.c_str());
317 painCave.isFatal = 1;
318 simError();
319 }
320
321 // found the correct opening string, now try to get the file
322 // format version number.
323
324 StringTokenizer tokenizer(line, "=<> \t\n\r");
325 std::string fileType = tokenizer.nextToken();
326 toUpper(fileType);
327
328 mdFileVersion = 0;
329
330 if (fileType == "OPENMD") {
331 while (tokenizer.hasMoreTokens()) {
332 std::string token(tokenizer.nextToken());
333 toUpper(token);
334 if (token == "VERSION") {
335 mdFileVersion = tokenizer.nextTokenAsInt();
336 break;
337 }
338 }
339 }
340
341 //scan through the input stream and find MetaData tag
342 while(mdFile_.getline(buffer, bufferSize)) {
343 ++lineNo;
344
345 std::string line = trimLeftCopy(buffer);
346 if (metaDataBlockStart == -1) {
347 i = CaseInsensitiveFind(line, "<MetaData>");
348 if (i != string::npos) {
349 metaDataBlockStart = lineNo;
350 mdOffset = mdFile_.tellg();
351 }
352 } else {
353 i = CaseInsensitiveFind(line, "</MetaData>");
354 if (i != string::npos) {
355 metaDataBlockEnd = lineNo;
356 }
357 }
358 }
359
360 if (metaDataBlockStart == -1) {
361 sprintf(painCave.errMsg,
362 "SimCreator: File: %s did not contain a <MetaData> tag!\n",
363 mdFileName.c_str());
364 painCave.isFatal = 1;
365 simError();
366 }
367 if (metaDataBlockEnd == -1) {
368 sprintf(painCave.errMsg,
369 "SimCreator: File: %s did not contain a closed MetaData block!\n",
370 mdFileName.c_str());
371 painCave.isFatal = 1;
372 simError();
373 }
374
375 mdFile_.clear();
376 mdFile_.seekg(0);
377 mdFile_.seekg(mdOffset);
378
379 mdRawData.clear();
380
381 bool foundVersion = false;
382
383 for (int i = 0; i < metaDataBlockEnd - metaDataBlockStart - 1; ++i) {
384 mdFile_.getline(buffer, bufferSize);
385 std::string line = trimLeftCopy(buffer);
386 j = CaseInsensitiveFind(line, "## Last run using OpenMD Version");
387 if (static_cast<size_t>(j) != string::npos) {
388 foundVersion = true;
389 mdRawData += version;
390 } else {
391 mdRawData += buffer;
392 }
393 mdRawData += "\n";
394 }
395
396 if (!foundVersion) mdRawData += version + "\n";
397
398 mdFile_.close();
399
400 #ifdef IS_MPI
401 }
402 #endif
403
404 std::stringstream rawMetaDataStream(mdRawData);
405
406 //parse meta-data file
407 Globals* simParams = parseFile(rawMetaDataStream, mdFileName, mdFileVersion,
408 metaDataBlockStart + 1);
409
410 //create the force field
411 ForceField * ff = new ForceField(simParams->getForceField());
412
413 if (ff == NULL) {
414 sprintf(painCave.errMsg,
415 "ForceField Factory can not create %s force field\n",
416 simParams->getForceField().c_str());
417 painCave.isFatal = 1;
418 simError();
419 }
420
421 if (simParams->haveForceFieldFileName()) {
422 ff->setForceFieldFileName(simParams->getForceFieldFileName());
423 }
424
425 std::string forcefieldFileName;
426 forcefieldFileName = ff->getForceFieldFileName();
427
428 if (simParams->haveForceFieldVariant()) {
429 //If the force field has variant, the variant force field name will be
430 //Base.variant.frc. For exampel EAM.u6.frc
431
432 std::string variant = simParams->getForceFieldVariant();
433
434 std::string::size_type pos = forcefieldFileName.rfind(".frc");
435 variant = "." + variant;
436 if (pos != std::string::npos) {
437 forcefieldFileName.insert(pos, variant);
438 } else {
439 //If the default force field file name does not containt .frc suffix, just append the .variant
440 forcefieldFileName.append(variant);
441 }
442 }
443
444 ff->parse(forcefieldFileName);
445 //create SimInfo
446 SimInfo * info = new SimInfo(ff, simParams);
447
448 info->setRawMetaData(mdRawData);
449
450 //gather parameters (SimCreator only retrieves part of the
451 //parameters)
452 gatherParameters(info, mdFileName);
453
454 //divide the molecules and determine the global index of molecules
455 #ifdef IS_MPI
456 divideMolecules(info);
457 #endif
458
459 //create the molecules
460 createMolecules(info);
461
462 //find the storage layout
463
464 int storageLayout = computeStorageLayout(info);
465
466 //allocate memory for DataStorage(circular reference, need to
467 //break it)
468 info->setSnapshotManager(new SimSnapshotManager(info, storageLayout));
469
470 //set the global index of atoms, rigidbodies and cutoffgroups
471 //(only need to be set once, the global index will never change
472 //again). Local indices of atoms and rigidbodies are already set
473 //by MoleculeCreator class which actually delegates the
474 //responsibility to LocalIndexManager.
475 setGlobalIndex(info);
476
477 //Although addInteractionPairs is called inside SimInfo's addMolecule
478 //method, at that point atoms don't have the global index yet
479 //(their global index are all initialized to -1). Therefore we
480 //have to call addInteractionPairs explicitly here. A way to work
481 //around is that we can determine the beginning global indices of
482 //atoms before they get created.
483 SimInfo::MoleculeIterator mi;
484 Molecule* mol;
485 for (mol= info->beginMolecule(mi); mol != NULL; mol = info->nextMolecule(mi)) {
486 info->addInteractionPairs(mol);
487 }
488
489 if (loadInitCoords)
490 loadCoordinates(info, mdFileName);
491 return info;
492 }
493
494 void SimCreator::gatherParameters(SimInfo *info, const std::string& mdfile) {
495
496 //figure out the output file names
497 std::string prefix;
498
499 #ifdef IS_MPI
500
501 if (worldRank == 0) {
502 #endif // is_mpi
503 Globals * simParams = info->getSimParams();
504 if (simParams->haveFinalConfig()) {
505 prefix = getPrefix(simParams->getFinalConfig());
506 } else {
507 prefix = getPrefix(mdfile);
508 }
509
510 info->setFinalConfigFileName(prefix + ".eor");
511 info->setDumpFileName(prefix + ".dump");
512 info->setStatFileName(prefix + ".stat");
513 info->setRestFileName(prefix + ".zang");
514
515 #ifdef IS_MPI
516
517 }
518
519 #endif
520
521 }
522
523 #ifdef IS_MPI
524 void SimCreator::divideMolecules(SimInfo *info) {
525 RealType a;
526 int nProcessors;
527 std::vector<int> atomsPerProc;
528 int nGlobalMols = info->getNGlobalMolecules();
529 std::vector<int> molToProcMap(nGlobalMols, -1); // default to an
530 // error
531 // condition:
532
533 MPI_Comm_size( MPI_COMM_WORLD, &nProcessors);
534 //nProcessors = MPI::COMM_WORLD.Get_size();
535
536 if (nProcessors > nGlobalMols) {
537 sprintf(painCave.errMsg,
538 "nProcessors (%d) > nMol (%d)\n"
539 "\tThe number of processors is larger than\n"
540 "\tthe number of molecules. This will not result in a \n"
541 "\tusable division of atoms for force decomposition.\n"
542 "\tEither try a smaller number of processors, or run the\n"
543 "\tsingle-processor version of OpenMD.\n", nProcessors,
544 nGlobalMols);
545
546 painCave.isFatal = 1;
547 simError();
548 }
549
550 Globals * simParams = info->getSimParams();
551 SeqRandNumGen* myRandom; //divide labor does not need Parallel
552 //random number generator
553 if (simParams->haveSeed()) {
554 int seedValue = simParams->getSeed();
555 myRandom = new SeqRandNumGen(seedValue);
556 }else {
557 myRandom = new SeqRandNumGen();
558 }
559
560
561 a = 3.0 * nGlobalMols / info->getNGlobalAtoms();
562
563 //initialize atomsPerProc
564 atomsPerProc.insert(atomsPerProc.end(), nProcessors, 0);
565
566 if (worldRank == 0) {
567 RealType numerator = info->getNGlobalAtoms();
568 RealType denominator = nProcessors;
569 RealType precast = numerator / denominator;
570 int nTarget = (int)(precast + 0.5);
571
572 for(int i = 0; i < nGlobalMols; i++) {
573
574 int done = 0;
575 int loops = 0;
576
577 while (!done) {
578 loops++;
579
580 // Pick a processor at random
581
582 int which_proc = (int) (myRandom->rand() * nProcessors);
583
584 //get the molecule stamp first
585 int stampId = info->getMoleculeStampId(i);
586 MoleculeStamp * moleculeStamp = info->getMoleculeStamp(stampId);
587
588 // How many atoms does this processor have so far?
589 int old_atoms = atomsPerProc[which_proc];
590 int add_atoms = moleculeStamp->getNAtoms();
591 int new_atoms = old_atoms + add_atoms;
592
593 // If we've been through this loop too many times, we need
594 // to just give up and assign the molecule to this processor
595 // and be done with it.
596
597 if (loops > 100) {
598
599 sprintf(painCave.errMsg,
600 "There have been 100 attempts to assign molecule %d to an\n"
601 "\tunderworked processor, but there's no good place to\n"
602 "\tleave it. OpenMD is assigning it at random to processor %d.\n",
603 i, which_proc);
604
605 painCave.isFatal = 0;
606 painCave.severity = OPENMD_INFO;
607 simError();
608
609 molToProcMap[i] = which_proc;
610 atomsPerProc[which_proc] += add_atoms;
611
612 done = 1;
613 continue;
614 }
615
616 // If we can add this molecule to this processor without sending
617 // it above nTarget, then go ahead and do it:
618
619 if (new_atoms <= nTarget) {
620 molToProcMap[i] = which_proc;
621 atomsPerProc[which_proc] += add_atoms;
622
623 done = 1;
624 continue;
625 }
626
627 // The only situation left is when new_atoms > nTarget. We
628 // want to accept this with some probability that dies off the
629 // farther we are from nTarget
630
631 // roughly: x = new_atoms - nTarget
632 // Pacc(x) = exp(- a * x)
633 // where a = penalty / (average atoms per molecule)
634
635 RealType x = (RealType)(new_atoms - nTarget);
636 RealType y = myRandom->rand();
637
638 if (y < exp(- a * x)) {
639 molToProcMap[i] = which_proc;
640 atomsPerProc[which_proc] += add_atoms;
641
642 done = 1;
643 continue;
644 } else {
645 continue;
646 }
647 }
648 }
649
650 delete myRandom;
651
652 // Spray out this nonsense to all other processors:
653 MPI_Bcast(&molToProcMap[0], nGlobalMols, MPI_INT, 0, MPI_COMM_WORLD);
654 // MPI::COMM_WORLD.Bcast(&molToProcMap[0], nGlobalMols, MPI::INT, 0);
655 } else {
656
657 // Listen to your marching orders from processor 0:
658 MPI_Bcast(&molToProcMap[0], nGlobalMols, MPI_INT, 0, MPI_COMM_WORLD);
659 // MPI::COMM_WORLD.Bcast(&molToProcMap[0], nGlobalMols, MPI::INT, 0);
660
661 }
662
663 info->setMolToProcMap(molToProcMap);
664 sprintf(checkPointMsg,
665 "Successfully divided the molecules among the processors.\n");
666 errorCheckPoint();
667 }
668
669 #endif
670
671 void SimCreator::createMolecules(SimInfo *info) {
672 MoleculeCreator molCreator;
673 int stampId;
674
675 for(int i = 0; i < info->getNGlobalMolecules(); i++) {
676
677 #ifdef IS_MPI
678
679 if (info->getMolToProc(i) == worldRank) {
680 #endif
681
682 stampId = info->getMoleculeStampId(i);
683 Molecule * mol = molCreator.createMolecule(info->getForceField(),
684 info->getMoleculeStamp(stampId),
685 stampId, i,
686 info->getLocalIndexManager());
687
688 info->addMolecule(mol);
689
690 #ifdef IS_MPI
691
692 }
693
694 #endif
695
696 } //end for(int i=0)
697 }
698
699 int SimCreator::computeStorageLayout(SimInfo* info) {
700
701 Globals* simParams = info->getSimParams();
702 int nRigidBodies = info->getNGlobalRigidBodies();
703 set<AtomType*> atomTypes = info->getSimulatedAtomTypes();
704 set<AtomType*>::iterator i;
705 bool hasDirectionalAtoms = false;
706 bool hasFixedCharge = false;
707 bool hasDipoles = false;
708 bool hasQuadrupoles = false;
709 bool hasPolarizable = false;
710 bool hasFluctuatingCharge = false;
711 bool hasMetallic = false;
712 int storageLayout = 0;
713 storageLayout |= DataStorage::dslPosition;
714 storageLayout |= DataStorage::dslVelocity;
715 storageLayout |= DataStorage::dslForce;
716
717 for (i = atomTypes.begin(); i != atomTypes.end(); ++i) {
718
719 DirectionalAdapter da = DirectionalAdapter( (*i) );
720 MultipoleAdapter ma = MultipoleAdapter( (*i) );
721 EAMAdapter ea = EAMAdapter( (*i) );
722 SuttonChenAdapter sca = SuttonChenAdapter( (*i) );
723 PolarizableAdapter pa = PolarizableAdapter( (*i) );
724 FixedChargeAdapter fca = FixedChargeAdapter( (*i) );
725 FluctuatingChargeAdapter fqa = FluctuatingChargeAdapter( (*i) );
726
727 if (da.isDirectional()){
728 hasDirectionalAtoms = true;
729 }
730 if (ma.isDipole()){
731 hasDipoles = true;
732 }
733 if (ma.isQuadrupole()){
734 hasQuadrupoles = true;
735 }
736 if (ea.isEAM() || sca.isSuttonChen()){
737 hasMetallic = true;
738 }
739 if ( fca.isFixedCharge() ){
740 hasFixedCharge = true;
741 }
742 if ( fqa.isFluctuatingCharge() ){
743 hasFluctuatingCharge = true;
744 }
745 if ( pa.isPolarizable() ){
746 hasPolarizable = true;
747 }
748 }
749
750 if (nRigidBodies > 0 || hasDirectionalAtoms) {
751 storageLayout |= DataStorage::dslAmat;
752 if(storageLayout & DataStorage::dslVelocity) {
753 storageLayout |= DataStorage::dslAngularMomentum;
754 }
755 if (storageLayout & DataStorage::dslForce) {
756 storageLayout |= DataStorage::dslTorque;
757 }
758 }
759 if (hasDipoles) {
760 storageLayout |= DataStorage::dslDipole;
761 }
762 if (hasQuadrupoles) {
763 storageLayout |= DataStorage::dslQuadrupole;
764 }
765 if (hasFixedCharge || hasFluctuatingCharge) {
766 storageLayout |= DataStorage::dslSkippedCharge;
767 }
768 if (hasMetallic) {
769 storageLayout |= DataStorage::dslDensity;
770 storageLayout |= DataStorage::dslFunctional;
771 storageLayout |= DataStorage::dslFunctionalDerivative;
772 }
773 if (hasPolarizable) {
774 storageLayout |= DataStorage::dslElectricField;
775 }
776 if (hasFluctuatingCharge){
777 storageLayout |= DataStorage::dslFlucQPosition;
778 if(storageLayout & DataStorage::dslVelocity) {
779 storageLayout |= DataStorage::dslFlucQVelocity;
780 }
781 if (storageLayout & DataStorage::dslForce) {
782 storageLayout |= DataStorage::dslFlucQForce;
783 }
784 }
785
786 // if the user has asked for them, make sure we've got the memory for the
787 // objects defined.
788
789 if (simParams->getOutputParticlePotential()) {
790 storageLayout |= DataStorage::dslParticlePot;
791 }
792
793 if (simParams->havePrintHeatFlux()) {
794 if (simParams->getPrintHeatFlux()) {
795 storageLayout |= DataStorage::dslParticlePot;
796 }
797 }
798
799 if (simParams->getOutputElectricField() | simParams->haveElectricField()) {
800 storageLayout |= DataStorage::dslElectricField;
801 }
802
803 if (simParams->getOutputFluctuatingCharges()) {
804 storageLayout |= DataStorage::dslFlucQPosition;
805 storageLayout |= DataStorage::dslFlucQVelocity;
806 storageLayout |= DataStorage::dslFlucQForce;
807 }
808
809 info->setStorageLayout(storageLayout);
810
811 return storageLayout;
812 }
813
814 void SimCreator::setGlobalIndex(SimInfo *info) {
815 SimInfo::MoleculeIterator mi;
816 Molecule::AtomIterator ai;
817 Molecule::RigidBodyIterator ri;
818 Molecule::CutoffGroupIterator ci;
819 Molecule::BondIterator boi;
820 Molecule::BendIterator bei;
821 Molecule::TorsionIterator ti;
822 Molecule::InversionIterator ii;
823 Molecule::IntegrableObjectIterator ioi;
824 Molecule* mol;
825 Atom* atom;
826 RigidBody* rb;
827 CutoffGroup* cg;
828 Bond* bond;
829 Bend* bend;
830 Torsion* torsion;
831 Inversion* inversion;
832 int beginAtomIndex;
833 int beginRigidBodyIndex;
834 int beginCutoffGroupIndex;
835 int beginBondIndex;
836 int beginBendIndex;
837 int beginTorsionIndex;
838 int beginInversionIndex;
839 int nGlobalAtoms = info->getNGlobalAtoms();
840 int nGlobalRigidBodies = info->getNGlobalRigidBodies();
841
842 beginAtomIndex = 0;
843 // The rigid body indices begin immediately after the atom indices:
844 beginRigidBodyIndex = info->getNGlobalAtoms();
845 beginCutoffGroupIndex = 0;
846 beginBondIndex = 0;
847 beginBendIndex = 0;
848 beginTorsionIndex = 0;
849 beginInversionIndex = 0;
850
851 for(int i = 0; i < info->getNGlobalMolecules(); i++) {
852
853 #ifdef IS_MPI
854 if (info->getMolToProc(i) == worldRank) {
855 #endif
856 // stuff to do if I own this molecule
857 mol = info->getMoleculeByGlobalIndex(i);
858
859 // The local index(index in DataStorge) of the atom is important:
860 for(atom = mol->beginAtom(ai); atom != NULL;
861 atom = mol->nextAtom(ai)) {
862 atom->setGlobalIndex(beginAtomIndex++);
863 }
864
865 for(rb = mol->beginRigidBody(ri); rb != NULL;
866 rb = mol->nextRigidBody(ri)) {
867 rb->setGlobalIndex(beginRigidBodyIndex++);
868 }
869
870 // The local index of other objects only depends on the order
871 // of traversal:
872 for(cg = mol->beginCutoffGroup(ci); cg != NULL;
873 cg = mol->nextCutoffGroup(ci)) {
874 cg->setGlobalIndex(beginCutoffGroupIndex++);
875 }
876 for(bond = mol->beginBond(boi); bond != NULL;
877 bond = mol->nextBond(boi)) {
878 bond->setGlobalIndex(beginBondIndex++);
879 }
880 for(bend = mol->beginBend(bei); bend != NULL;
881 bend = mol->nextBend(bei)) {
882 bend->setGlobalIndex(beginBendIndex++);
883 }
884 for(torsion = mol->beginTorsion(ti); torsion != NULL;
885 torsion = mol->nextTorsion(ti)) {
886 torsion->setGlobalIndex(beginTorsionIndex++);
887 }
888 for(inversion = mol->beginInversion(ii); inversion != NULL;
889 inversion = mol->nextInversion(ii)) {
890 inversion->setGlobalIndex(beginInversionIndex++);
891 }
892
893 #ifdef IS_MPI
894 } else {
895
896 // stuff to do if I don't own this molecule
897
898 int stampId = info->getMoleculeStampId(i);
899 MoleculeStamp* stamp = info->getMoleculeStamp(stampId);
900
901 beginAtomIndex += stamp->getNAtoms();
902 beginRigidBodyIndex += stamp->getNRigidBodies();
903 beginCutoffGroupIndex += stamp->getNCutoffGroups() + stamp->getNFreeAtoms();
904 beginBondIndex += stamp->getNBonds();
905 beginBendIndex += stamp->getNBends();
906 beginTorsionIndex += stamp->getNTorsions();
907 beginInversionIndex += stamp->getNInversions();
908 }
909 #endif
910
911 } //end for(int i=0)
912
913 //fill globalGroupMembership
914 std::vector<int> globalGroupMembership(info->getNGlobalAtoms(), 0);
915 for(mol = info->beginMolecule(mi); mol != NULL;
916 mol = info->nextMolecule(mi)) {
917 for (cg = mol->beginCutoffGroup(ci); cg != NULL;
918 cg = mol->nextCutoffGroup(ci)) {
919 for(atom = cg->beginAtom(ai); atom != NULL; atom = cg->nextAtom(ai)) {
920 globalGroupMembership[atom->getGlobalIndex()] = cg->getGlobalIndex();
921 }
922
923 }
924 }
925
926 #ifdef IS_MPI
927 // Since the globalGroupMembership has been zero filled and we've only
928 // poked values into the atoms we know, we can do an Allreduce
929 // to get the full globalGroupMembership array (We think).
930 // This would be prettier if we could use MPI_IN_PLACE like the MPI-2
931 // docs said we could.
932 std::vector<int> tmpGroupMembership(info->getNGlobalAtoms(), 0);
933 MPI_Allreduce(&globalGroupMembership[0],
934 &tmpGroupMembership[0], nGlobalAtoms,
935 MPI_INT, MPI_SUM, MPI_COMM_WORLD);
936 // MPI::COMM_WORLD.Allreduce(&globalGroupMembership[0],
937 // &tmpGroupMembership[0], nGlobalAtoms,
938 // MPI::INT, MPI::SUM);
939 info->setGlobalGroupMembership(tmpGroupMembership);
940 #else
941 info->setGlobalGroupMembership(globalGroupMembership);
942 #endif
943
944 //fill molMembership
945 std::vector<int> globalMolMembership(info->getNGlobalAtoms() +
946 info->getNGlobalRigidBodies(), 0);
947
948 for(mol = info->beginMolecule(mi); mol != NULL;
949 mol = info->nextMolecule(mi)) {
950 for(atom = mol->beginAtom(ai); atom != NULL; atom = mol->nextAtom(ai)) {
951 globalMolMembership[atom->getGlobalIndex()] = mol->getGlobalIndex();
952 }
953 for (rb = mol->beginRigidBody(ri); rb != NULL;
954 rb = mol->nextRigidBody(ri)) {
955 globalMolMembership[rb->getGlobalIndex()] = mol->getGlobalIndex();
956 }
957 }
958
959 #ifdef IS_MPI
960 std::vector<int> tmpMolMembership(info->getNGlobalAtoms() +
961 info->getNGlobalRigidBodies(), 0);
962 MPI_Allreduce(&globalMolMembership[0], &tmpMolMembership[0],
963 nGlobalAtoms + nGlobalRigidBodies,
964 MPI_INT, MPI_SUM, MPI_COMM_WORLD);
965 // MPI::COMM_WORLD.Allreduce(&globalMolMembership[0], &tmpMolMembership[0],
966 // nGlobalAtoms + nGlobalRigidBodies,
967 // MPI::INT, MPI::SUM);
968
969 info->setGlobalMolMembership(tmpMolMembership);
970 #else
971 info->setGlobalMolMembership(globalMolMembership);
972 #endif
973
974 // nIOPerMol holds the number of integrable objects per molecule
975 // here the molecules are listed by their global indices.
976
977 std::vector<int> nIOPerMol(info->getNGlobalMolecules(), 0);
978 for (mol = info->beginMolecule(mi); mol != NULL;
979 mol = info->nextMolecule(mi)) {
980 nIOPerMol[mol->getGlobalIndex()] = mol->getNIntegrableObjects();
981 }
982
983 #ifdef IS_MPI
984 std::vector<int> numIntegrableObjectsPerMol(info->getNGlobalMolecules(), 0);
985 MPI_Allreduce(&nIOPerMol[0], &numIntegrableObjectsPerMol[0],
986 info->getNGlobalMolecules(), MPI_INT, MPI_SUM, MPI_COMM_WORLD);
987 // MPI::COMM_WORLD.Allreduce(&nIOPerMol[0], &numIntegrableObjectsPerMol[0],
988 // info->getNGlobalMolecules(), MPI::INT, MPI::SUM);
989 #else
990 std::vector<int> numIntegrableObjectsPerMol = nIOPerMol;
991 #endif
992
993 std::vector<int> startingIOIndexForMol(info->getNGlobalMolecules());
994
995 int startingIndex = 0;
996 for (int i = 0; i < info->getNGlobalMolecules(); i++) {
997 startingIOIndexForMol[i] = startingIndex;
998 startingIndex += numIntegrableObjectsPerMol[i];
999 }
1000
1001 std::vector<StuntDouble*> IOIndexToIntegrableObject(info->getNGlobalIntegrableObjects(), (StuntDouble*)NULL);
1002 for (mol = info->beginMolecule(mi); mol != NULL;
1003 mol = info->nextMolecule(mi)) {
1004 int myGlobalIndex = mol->getGlobalIndex();
1005 int globalIO = startingIOIndexForMol[myGlobalIndex];
1006 for (StuntDouble* sd = mol->beginIntegrableObject(ioi); sd != NULL;
1007 sd = mol->nextIntegrableObject(ioi)) {
1008 sd->setGlobalIntegrableObjectIndex(globalIO);
1009 IOIndexToIntegrableObject[globalIO] = sd;
1010 globalIO++;
1011 }
1012 }
1013
1014 info->setIOIndexToIntegrableObject(IOIndexToIntegrableObject);
1015
1016 }
1017
1018 void SimCreator::loadCoordinates(SimInfo* info, const std::string& mdFileName) {
1019
1020 DumpReader reader(info, mdFileName);
1021 int nframes = reader.getNFrames();
1022
1023 if (nframes > 0) {
1024 reader.readFrame(nframes - 1);
1025 } else {
1026 //invalid initial coordinate file
1027 sprintf(painCave.errMsg,
1028 "Initial configuration file %s should at least contain one frame\n",
1029 mdFileName.c_str());
1030 painCave.isFatal = 1;
1031 simError();
1032 }
1033 //copy the current snapshot to previous snapshot
1034 info->getSnapshotManager()->advance();
1035 }
1036
1037 } //end namespace OpenMD
1038
1039

Properties

Name Value
svn:keywords Author Id Revision Date