applications/staticProps/StaticProps.cpp

/*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 *
 * SUPPORT OPEN SCIENCE!  If you use OpenMD or its source code in your
 * research, please cite the appropriate papers when you publish your
 * work.  Good starting points are:
 *                                                                      
 * [1]  Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).             
 * [2]  Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).          
 * [3]  Sun, Lin & Gezelter, J. Chem. Phys. 128, 24107 (2008).          
 * [4]  Kuang & Gezelter,  J. Chem. Phys. 133, 164101 (2010).
 * [5]  Vardeman, Stocker & Gezelter, J. Chem. Theory Comput. 7, 834 (2011).
 */
 
#include <iostream>
#include <fstream>
#include <string>

#include "brains/SimCreator.hpp"
#include "brains/SimInfo.hpp"
#include "io/DumpReader.hpp"
#include "utils/simError.h"

#include "applications/staticProps/StaticPropsCmd.h"
#include "applications/staticProps/StaticAnalyser.hpp"
#include "applications/staticProps/GofR.hpp"
#include "applications/staticProps/GofZ.hpp"
#include "applications/staticProps/GofRZ.hpp"
#include "applications/staticProps/GofRAngle.hpp"
#include "applications/staticProps/GofAngle2.hpp"
#include "applications/staticProps/GofXyz.hpp"
#include "applications/staticProps/TwoDGofR.hpp"
#include "applications/staticProps/P2OrderParameter.hpp"
#include "applications/staticProps/BondOrderParameter.hpp"
#include "applications/staticProps/BOPofR.hpp"
#include "applications/staticProps/RippleOP.hpp"
#include "applications/staticProps/SCDOrderParameter.hpp"
#include "applications/staticProps/DensityPlot.hpp"
#include "applications/staticProps/ObjectCount.hpp"
#include "applications/staticProps/RhoZ.hpp"
#include "applications/staticProps/pAngle.hpp"
#include "applications/staticProps/BondAngleDistribution.hpp"
#include "applications/staticProps/NanoVolume.hpp"
#include "applications/staticProps/NanoLength.hpp"
#if defined(HAVE_FFTW_H) || defined(HAVE_DFFTW_H) || defined(HAVE_FFTW3_H)
#include "applications/staticProps/Hxy.hpp"
#endif
#include "applications/staticProps/RhoR.hpp"
#include "applications/staticProps/AngleR.hpp"
#include "applications/staticProps/TetrahedralityParam.hpp"
#include "applications/staticProps/TetrahedralityParamZ.hpp"
using namespace OpenMD;

int main(int argc, char* argv[]){
  
  
  gengetopt_args_info args_info;
  
  //parse the command line option
  if (cmdline_parser (argc, argv, &args_info) != 0) {
    exit(1) ;
  }
  
  //get the dumpfile name
  std::string dumpFileName = args_info.input_arg;
  std::string sele1;
  std::string sele2;
  
  // check the first selection argument, or set it to the environment
  // variable, or failing that, set it to "select all"
  
  if (args_info.sele1_given) {
    sele1 = args_info.sele1_arg;
  } else {
    char*  sele1Env= getenv("SELECTION1");
    if (sele1Env) {
      sele1 = sele1Env;
    } else {
      sele1 = "select all";
    }
  }
  
  // check the second selection argument, or set it to the environment
  // variable, or failing that, set it to "select all"
  
  if (args_info.sele2_given) {
    sele2 = args_info.sele2_arg;
  } else {
    char* sele2Env = getenv("SELECTION1");
    if (sele2Env) {
      sele2 = sele2Env;            
    } else { 
      //If sele2 is not specified, then the default behavior
      //should be what is already intended for sele1
      sele2 = sele1;
    }
  }

  bool batchMode;
  if (args_info.scd_given){
    if (args_info.sele1_given && 
        args_info.sele2_given && args_info.sele3_given) {
      batchMode = false;
    } else if (args_info.molname_given && 
               args_info.begin_given && args_info.end_given) {
      if (args_info.begin_arg < 0 || 
          args_info.end_arg < 0 || args_info.begin_arg > args_info.end_arg-2) {
        sprintf( painCave.errMsg,
                 "below conditions are not satisfied:\n"
                 "0 <= begin && 0<= end && begin <= end-2\n");
        painCave.severity = OPENMD_ERROR;
        painCave.isFatal = 1;
        simError();                    
      }
      batchMode = true;        
    } else{
      sprintf( painCave.errMsg,
               "either --sele1, --sele2, --sele3 are specified,"
               " or --molname, --begin, --end are specified\n");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  }
  
  //parse md file and set up the system
  SimCreator creator;
  SimInfo* info = creator.createSim(dumpFileName);

  RealType maxLen;
  RealType zmaxLen;
  if (args_info.length_given) {
    maxLen = args_info.length_arg;
    if (args_info.zlength_given){
      zmaxLen = args_info.zlength_arg;
    }
  } else {
    Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
    maxLen = std::min(std::min(hmat(0, 0), hmat(1, 1)), hmat(2, 2)) /2.0;
    zmaxLen = hmat(2,2);    
  }    
  
  StaticAnalyser* analyser;
  if (args_info.gofr_given){
    analyser= new GofR(info, dumpFileName, sele1, sele2, maxLen, 
                       args_info.nbins_arg);        
  } else if (args_info.gofz_given) {
    analyser= new GofZ(info, dumpFileName, sele1, sele2, maxLen,
                       args_info.nbins_arg);
  } else if (args_info.r_z_given) {
    analyser  = new GofRZ(info, dumpFileName, sele1, sele2, maxLen, zmaxLen, 
                          args_info.nbins_arg, args_info.nbins_z_arg);
  } else if (args_info.r_theta_given) {
    analyser  = new GofRTheta(info, dumpFileName, sele1, sele2, maxLen, 
                              args_info.nbins_arg, args_info.nanglebins_arg);
  } else if (args_info.r_omega_given) {
    analyser  = new GofROmega(info, dumpFileName, sele1, sele2, maxLen, 
                              args_info.nbins_arg, args_info.nanglebins_arg);
  } else if (args_info.theta_omega_given) {
    analyser  = new GofAngle2(info, dumpFileName, sele1, sele2, 
                              args_info.nanglebins_arg);
  } else if (args_info.gxyz_given) {
    if (args_info.refsele_given) {
      analyser= new GofXyz(info, dumpFileName, sele1, sele2,
                           args_info.refsele_arg, maxLen, args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "--refsele must set when --gxyz is used");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();  
    }
  } else if (args_info.twodgofr_given){
    if (args_info.dz_given) {
      analyser= new TwoDGofR(info, dumpFileName, sele1, sele2, maxLen, 
                             args_info.dz_arg, args_info.nbins_arg);        
    } else {
      sprintf( painCave.errMsg,
               "A slab width (dz) must be specified when calculating TwoDGofR");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }    
  } else if (args_info.p2_given) {
    if (args_info.sele1_given) {     
      if (args_info.sele2_given) 
        analyser  = new P2OrderParameter(info, dumpFileName, sele1, sele2);
      else 
        if (args_info.seleoffset_given) 
          analyser  = new P2OrderParameter(info, dumpFileName, sele1, 
                                           args_info.seleoffset_arg);
        else 
          analyser  = new P2OrderParameter(info, dumpFileName, sele1);
    } else {
      sprintf( painCave.errMsg,
               "At least one selection script (--sele1) must be specified when calculating P2 order parameters");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.rp2_given){
    analyser = new RippleOP(info, dumpFileName, sele1, sele2);
  } else if (args_info.bo_given){
    if (args_info.rcut_given) {
      analyser = new BondOrderParameter(info, dumpFileName, sele1, 
                                        args_info.rcut_arg, 
                                        args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
    
  } else if (args_info.tet_param_given) {
    if (args_info.rcut_given) {   
      analyser = new TetrahedralityParam(info, dumpFileName, sele1, 
                                         args_info.rcut_arg, 
                                         args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Tetrahedrality Parameters");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.tet_param_z_given) {
    if (args_info.rcut_given) {   
      analyser = new TetrahedralityParamZ(info, dumpFileName, sele1, sele2,
                                          args_info.rcut_arg, 
                                          args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Tetrahedrality Parameters");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.bor_given){
    if (args_info.rcut_given) {
      analyser = new BOPofR(info, dumpFileName, sele1, args_info.rcut_arg,
                            args_info.nbins_arg, maxLen);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.bad_given){
    if (args_info.rcut_given) {
      analyser = new BondAngleDistribution(info, dumpFileName, sele1, 
                                           args_info.rcut_arg,
                                           args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Angle Distributions");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.scd_given) {
    if (batchMode) {
      analyser  = new SCDOrderParameter(info, dumpFileName, 
                                        args_info.molname_arg, 
                                        args_info.begin_arg, args_info.end_arg);
    } else{
      std::string sele3 = args_info.sele3_arg;
      analyser  = new SCDOrderParameter(info, dumpFileName, 
                                        sele1, sele2, sele3);
    }
  }else if (args_info.density_given) {
    analyser= new DensityPlot(info, dumpFileName, sele1, sele2, maxLen,
                              args_info.nbins_arg);  
  } else if (args_info.count_given) {
    analyser = new ObjectCount(info, dumpFileName, sele1 );
  } else if (args_info.slab_density_given) {
    analyser = new RhoZ(info, dumpFileName, sele1, args_info.nbins_arg);
  } else if (args_info.p_angle_given) {
    analyser = new pAngle(info, dumpFileName, sele1, args_info.nbins_arg);
#if defined(HAVE_FFTW_H) || defined(HAVE_DFFTW_H) || defined(HAVE_FFTW3_H)
  }else if (args_info.hxy_given) {
    analyser = new Hxy(info, dumpFileName, sele1, args_info.nbins_x_arg, 
                       args_info.nbins_y_arg, args_info.nbins_arg);
#endif
  }else if (args_info.rho_r_given) {
    if (args_info.radius_given){
      analyser = new RhoR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg,args_info.radius_arg);
    }else{
      sprintf( painCave.errMsg,
               "A particle radius (radius) must be specified when calculating Rho(r)");
      painCave.severity = OPENMD_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.hullvol_given) {
    analyser = new NanoVolume(info, dumpFileName, sele1);
  } else if (args_info.rodlength_given) {
    analyser = new NanoLength(info, dumpFileName, sele1);
  } else if (args_info.angle_r_given) {
    analyser = new AngleR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg);
  }
  
  if (args_info.output_given) {
    analyser->setOutputName(args_info.output_arg);
  }
  if (args_info.step_given) {
    analyser->setStep(args_info.step_arg);
  }
  
  analyser->process();
  
  delete analyser;    
  delete info;
  
  return 0;   
}
Revision:	1846
Committed:	Thu Jan 31 15:55:47 2013 UTC (12 years, 3 months ago) by gezelter
File size:	13287 byte(s)
Log Message:	Bug fix in Tetrahedrality parameter Z exposed another bug in SimInfo.
#	User	Rev	Content
1	gezelter	507	/*
2	tim	310	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3			*
4			* The University of Notre Dame grants you ("Licensee") a
5			* non-exclusive, royalty free, license to use, modify and
6			* redistribute this software in source and binary code form, provided
7			* that the following conditions are met:
8			*
9	gezelter	1390	* 1. Redistributions of source code must retain the above copyright
10	tim	310	* notice, this list of conditions and the following disclaimer.
11			*
12	gezelter	1390	* 2. Redistributions in binary form must reproduce the above copyright
13	tim	310	* notice, this list of conditions and the following disclaimer in the
14			* documentation and/or other materials provided with the
15			* distribution.
16			*
17			* This software is provided "AS IS," without a warranty of any
18			* kind. All express or implied conditions, representations and
19			* warranties, including any implied warranty of merchantability,
20			* fitness for a particular purpose or non-infringement, are hereby
21			* excluded. The University of Notre Dame and its licensors shall not
22			* be liable for any damages suffered by licensee as a result of
23			* using, modifying or distributing the software or its
24			* derivatives. In no event will the University of Notre Dame or its
25			* licensors be liable for any lost revenue, profit or data, or for
26			* direct, indirect, special, consequential, incidental or punitive
27			* damages, however caused and regardless of the theory of liability,
28			* arising out of the use of or inability to use software, even if the
29			* University of Notre Dame has been advised of the possibility of
30			* such damages.
31	gezelter	1390	*
32			* SUPPORT OPEN SCIENCE! If you use OpenMD or its source code in your
33			* research, please cite the appropriate papers when you publish your
34			* work. Good starting points are:
35			*
36			* [1] Meineke, et al., J. Comp. Chem. 26, 252-271 (2005).
37			* [2] Fennell & Gezelter, J. Chem. Phys. 124, 234104 (2006).
38			* [3] Sun, Lin & Gezelter, J. Chem. Phys. 128, 24107 (2008).
39	gezelter	1782	* [4] Kuang & Gezelter, J. Chem. Phys. 133, 164101 (2010).
40			* [5] Vardeman, Stocker & Gezelter, J. Chem. Theory Comput. 7, 834 (2011).
41	tim	310	*/
42
43			#include <iostream>
44			#include <fstream>
45			#include <string>
46
47			#include "brains/SimCreator.hpp"
48			#include "brains/SimInfo.hpp"
49			#include "io/DumpReader.hpp"
50			#include "utils/simError.h"
51
52	tim	311	#include "applications/staticProps/StaticPropsCmd.h"
53	tim	543	#include "applications/staticProps/StaticAnalyser.hpp"
54	tim	311	#include "applications/staticProps/GofR.hpp"
55	xsun	1213	#include "applications/staticProps/GofZ.hpp"
56	gezelter	1440	#include "applications/staticProps/GofRZ.hpp"
57	tim	311	#include "applications/staticProps/GofRAngle.hpp"
58			#include "applications/staticProps/GofAngle2.hpp"
59			#include "applications/staticProps/GofXyz.hpp"
60	gezelter	1454	#include "applications/staticProps/TwoDGofR.hpp"
61	tim	543	#include "applications/staticProps/P2OrderParameter.hpp"
62	gezelter	1039	#include "applications/staticProps/BondOrderParameter.hpp"
63	chuckv	1128	#include "applications/staticProps/BOPofR.hpp"
64	xsun	980	#include "applications/staticProps/RippleOP.hpp"
65	tim	544	#include "applications/staticProps/SCDOrderParameter.hpp"
66	tim	545	#include "applications/staticProps/DensityPlot.hpp"
67	gezelter	1513	#include "applications/staticProps/ObjectCount.hpp"
68	tim	840	#include "applications/staticProps/RhoZ.hpp"
69	gezelter	1413	#include "applications/staticProps/pAngle.hpp"
70	chuckv	1180	#include "applications/staticProps/BondAngleDistribution.hpp"
71			#include "applications/staticProps/NanoVolume.hpp"
72	gezelter	1585	#include "applications/staticProps/NanoLength.hpp"
73	gezelter	957	#if defined(HAVE_FFTW_H) \|\| defined(HAVE_DFFTW_H) \|\| defined(HAVE_FFTW3_H)
74	xsun	955	#include "applications/staticProps/Hxy.hpp"
75	gezelter	956	#endif
76	chuckv	1091	#include "applications/staticProps/RhoR.hpp"
77	kstocke1	1522	#include "applications/staticProps/AngleR.hpp"
78			#include "applications/staticProps/TetrahedralityParam.hpp"
79	gezelter	1782	#include "applications/staticProps/TetrahedralityParamZ.hpp"
80	gezelter	1390	using namespace OpenMD;
81	tim	310
82			int main(int argc, char* argv[]){
83
84	gezelter	1513
85			gengetopt_args_info args_info;
86
87			//parse the command line option
88			if (cmdline_parser (argc, argv, &args_info) != 0) {
89			exit(1) ;
90			}
91
92			//get the dumpfile name
93			std::string dumpFileName = args_info.input_arg;
94			std::string sele1;
95			std::string sele2;
96
97			// check the first selection argument, or set it to the environment
98			// variable, or failing that, set it to "select all"
99
100			if (args_info.sele1_given) {
101			sele1 = args_info.sele1_arg;
102			} else {
103			char* sele1Env= getenv("SELECTION1");
104			if (sele1Env) {
105			sele1 = sele1Env;
106			} else {
107			sele1 = "select all";
108			}
109			}
110
111			// check the second selection argument, or set it to the environment
112			// variable, or failing that, set it to "select all"
113
114			if (args_info.sele2_given) {
115			sele2 = args_info.sele2_arg;
116			} else {
117			char* sele2Env = getenv("SELECTION1");
118			if (sele2Env) {
119			sele2 = sele2Env;
120			} else {
121	gezelter	1819	//If sele2 is not specified, then the default behavior
122			//should be what is already intended for sele1
123	jmichalk	1785	sele2 = sele1;
124	gezelter	1513	}
125			}
126	gezelter	1846
127	gezelter	1513	bool batchMode;
128			if (args_info.scd_given){
129	gezelter	1846	if (args_info.sele1_given &&
130			args_info.sele2_given && args_info.sele3_given) {
131	gezelter	1513	batchMode = false;
132	gezelter	1846	} else if (args_info.molname_given &&
133			args_info.begin_given && args_info.end_given) {
134			if (args_info.begin_arg < 0 \|\|
135			args_info.end_arg < 0 \|\| args_info.begin_arg > args_info.end_arg-2) {
136	gezelter	1513	sprintf( painCave.errMsg,
137			"below conditions are not satisfied:\n"
138			"0 <= begin && 0<= end && begin <= end-2\n");
139			painCave.severity = OPENMD_ERROR;
140			painCave.isFatal = 1;
141			simError();
142			}
143			batchMode = true;
144			} else{
145			sprintf( painCave.errMsg,
146			"either --sele1, --sele2, --sele3 are specified,"
147			" or --molname, --begin, --end are specified\n");
148			painCave.severity = OPENMD_ERROR;
149			painCave.isFatal = 1;
150	gezelter	1846	simError();
151	gezelter	1513	}
152			}
153
154			//parse md file and set up the system
155			SimCreator creator;
156			SimInfo* info = creator.createSim(dumpFileName);
157	tim	310
158	gezelter	1513	RealType maxLen;
159			RealType zmaxLen;
160			if (args_info.length_given) {
161			maxLen = args_info.length_arg;
162			if (args_info.zlength_given){
163			zmaxLen = args_info.zlength_arg;
164	chuckv	1445	}
165	gezelter	1513	} else {
166			Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
167			maxLen = std::min(std::min(hmat(0, 0), hmat(1, 1)), hmat(2, 2)) /2.0;
168			zmaxLen = hmat(2,2);
169			}
170	kstocke1	1522
171	gezelter	1513	StaticAnalyser* analyser;
172			if (args_info.gofr_given){
173			analyser= new GofR(info, dumpFileName, sele1, sele2, maxLen,
174	kstocke1	1522	args_info.nbins_arg);
175	gezelter	1513	} else if (args_info.gofz_given) {
176			analyser= new GofZ(info, dumpFileName, sele1, sele2, maxLen,
177	kstocke1	1522	args_info.nbins_arg);
178	gezelter	1513	} else if (args_info.r_z_given) {
179			analyser = new GofRZ(info, dumpFileName, sele1, sele2, maxLen, zmaxLen,
180	kstocke1	1522	args_info.nbins_arg, args_info.nbins_z_arg);
181	gezelter	1513	} else if (args_info.r_theta_given) {
182			analyser = new GofRTheta(info, dumpFileName, sele1, sele2, maxLen,
183	kstocke1	1522	args_info.nbins_arg, args_info.nanglebins_arg);
184	gezelter	1513	} else if (args_info.r_omega_given) {
185			analyser = new GofROmega(info, dumpFileName, sele1, sele2, maxLen,
186	kstocke1	1522	args_info.nbins_arg, args_info.nanglebins_arg);
187	gezelter	1513	} else if (args_info.theta_omega_given) {
188			analyser = new GofAngle2(info, dumpFileName, sele1, sele2,
189	kstocke1	1522	args_info.nanglebins_arg);
190	gezelter	1513	} else if (args_info.gxyz_given) {
191			if (args_info.refsele_given) {
192	gezelter	1846	analyser= new GofXyz(info, dumpFileName, sele1, sele2,
193			args_info.refsele_arg, maxLen, args_info.nbins_arg);
194	gezelter	1039	} else {
195	gezelter	1513	sprintf( painCave.errMsg,
196	kstocke1	1522	"--refsele must set when --gxyz is used");
197	gezelter	1513	painCave.severity = OPENMD_ERROR;
198			painCave.isFatal = 1;
199			simError();
200	tim	310	}
201	gezelter	1513	} else if (args_info.twodgofr_given){
202			if (args_info.dz_given) {
203			analyser= new TwoDGofR(info, dumpFileName, sele1, sele2, maxLen,
204	kstocke1	1522	args_info.dz_arg, args_info.nbins_arg);
205	chuckv	1445	} else {
206	gezelter	1513	sprintf( painCave.errMsg,
207	kstocke1	1522	"A slab width (dz) must be specified when calculating TwoDGofR");
208	gezelter	1513	painCave.severity = OPENMD_ERROR;
209			painCave.isFatal = 1;
210			simError();
211	kstocke1	1522	}
212	gezelter	1513	} else if (args_info.p2_given) {
213	gezelter	1542	if (args_info.sele1_given) {
214			if (args_info.sele2_given)
215			analyser = new P2OrderParameter(info, dumpFileName, sele1, sele2);
216			else
217	gezelter	1819	if (args_info.seleoffset_given)
218			analyser = new P2OrderParameter(info, dumpFileName, sele1,
219			args_info.seleoffset_arg);
220			else
221			analyser = new P2OrderParameter(info, dumpFileName, sele1);
222	gezelter	1542	} else {
223			sprintf( painCave.errMsg,
224			"At least one selection script (--sele1) must be specified when calculating P2 order parameters");
225			painCave.severity = OPENMD_ERROR;
226			painCave.isFatal = 1;
227			simError();
228			}
229	gezelter	1513	} else if (args_info.rp2_given){
230			analyser = new RippleOP(info, dumpFileName, sele1, sele2);
231			} else if (args_info.bo_given){
232			if (args_info.rcut_given) {
233			analyser = new BondOrderParameter(info, dumpFileName, sele1,
234	kstocke1	1522	args_info.rcut_arg,
235			args_info.nbins_arg);
236	gezelter	1513	} else {
237			sprintf( painCave.errMsg,
238	kstocke1	1522	"A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
239	gezelter	1513	painCave.severity = OPENMD_ERROR;
240			painCave.isFatal = 1;
241			simError();
242	tim	544	}
243	kstocke1	1522
244			} else if (args_info.tet_param_given) {
245			if (args_info.rcut_given) {
246			analyser = new TetrahedralityParam(info, dumpFileName, sele1,
247			args_info.rcut_arg,
248			args_info.nbins_arg);
249			} else {
250			sprintf( painCave.errMsg,
251			"A cutoff radius (rcut) must be specified when calculating Tetrahedrality Parameters");
252			painCave.severity = OPENMD_ERROR;
253			painCave.isFatal = 1;
254			simError();
255			}
256	gezelter	1782	} else if (args_info.tet_param_z_given) {
257			if (args_info.rcut_given) {
258	gezelter	1846	analyser = new TetrahedralityParamZ(info, dumpFileName, sele1, sele2,
259			args_info.rcut_arg,
260			args_info.nbins_arg);
261	gezelter	1782	} else {
262			sprintf( painCave.errMsg,
263			"A cutoff radius (rcut) must be specified when calculating Tetrahedrality Parameters");
264			painCave.severity = OPENMD_ERROR;
265			painCave.isFatal = 1;
266			simError();
267			}
268	gezelter	1513	} else if (args_info.bor_given){
269			if (args_info.rcut_given) {
270			analyser = new BOPofR(info, dumpFileName, sele1, args_info.rcut_arg,
271	kstocke1	1522	args_info.nbins_arg, maxLen);
272	chuckv	1445	} else {
273	gezelter	1513	sprintf( painCave.errMsg,
274	kstocke1	1522	"A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
275	gezelter	1513	painCave.severity = OPENMD_ERROR;
276			painCave.isFatal = 1;
277			simError();
278			}
279			} else if (args_info.bad_given){
280			if (args_info.rcut_given) {
281	gezelter	1846	analyser = new BondAngleDistribution(info, dumpFileName, sele1,
282			args_info.rcut_arg,
283	kstocke1	1522	args_info.nbins_arg);
284	gezelter	1513	} else {
285			sprintf( painCave.errMsg,
286	kstocke1	1522	"A cutoff radius (rcut) must be specified when calculating Bond Angle Distributions");
287	gezelter	1513	painCave.severity = OPENMD_ERROR;
288			painCave.isFatal = 1;
289			simError();
290	gezelter	1846	}
291	gezelter	1513	} else if (args_info.scd_given) {
292			if (batchMode) {
293	gezelter	1846	analyser = new SCDOrderParameter(info, dumpFileName,
294			args_info.molname_arg,
295	kstocke1	1522	args_info.begin_arg, args_info.end_arg);
296	gezelter	1513	} else{
297			std::string sele3 = args_info.sele3_arg;
298	gezelter	1846	analyser = new SCDOrderParameter(info, dumpFileName,
299			sele1, sele2, sele3);
300	gezelter	1513	}
301			}else if (args_info.density_given) {
302			analyser= new DensityPlot(info, dumpFileName, sele1, sele2, maxLen,
303	kstocke1	1522	args_info.nbins_arg);
304	gezelter	1513	} else if (args_info.count_given) {
305			analyser = new ObjectCount(info, dumpFileName, sele1 );
306			} else if (args_info.slab_density_given) {
307			analyser = new RhoZ(info, dumpFileName, sele1, args_info.nbins_arg);
308			} else if (args_info.p_angle_given) {
309			analyser = new pAngle(info, dumpFileName, sele1, args_info.nbins_arg);
310	gezelter	957	#if defined(HAVE_FFTW_H) \|\| defined(HAVE_DFFTW_H) \|\| defined(HAVE_FFTW3_H)
311	gezelter	1513	}else if (args_info.hxy_given) {
312			analyser = new Hxy(info, dumpFileName, sele1, args_info.nbins_x_arg,
313	kstocke1	1522	args_info.nbins_y_arg, args_info.nbins_arg);
314	gezelter	956	#endif
315	gezelter	1513	}else if (args_info.rho_r_given) {
316			if (args_info.radius_given){
317			analyser = new RhoR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg,args_info.radius_arg);
318			}else{
319			sprintf( painCave.errMsg,
320	kstocke1	1522	"A particle radius (radius) must be specified when calculating Rho(r)");
321	gezelter	1513	painCave.severity = OPENMD_ERROR;
322			painCave.isFatal = 1;
323			simError();
324	chuckv	1091	}
325	kstocke1	1522	} else if (args_info.hullvol_given) {
326	gezelter	1513	analyser = new NanoVolume(info, dumpFileName, sele1);
327	gezelter	1585	} else if (args_info.rodlength_given) {
328			analyser = new NanoLength(info, dumpFileName, sele1);
329	kstocke1	1522	} else if (args_info.angle_r_given) {
330			analyser = new AngleR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg);
331	gezelter	1513	}
332	gezelter	1846
333	gezelter	1513	if (args_info.output_given) {
334			analyser->setOutputName(args_info.output_arg);
335			}
336			if (args_info.step_given) {
337			analyser->setStep(args_info.step_arg);
338			}
339	gezelter	1846
340	gezelter	1513	analyser->process();
341	kstocke1	1522
342	gezelter	1513	delete analyser;
343			delete info;
344	gezelter	1846
345	gezelter	1513	return 0;
346	tim	310	}