applications/nanoRodBuilder/nanorodBuilder.cpp

 /*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Acknowledgement of the program authors must be made in any
 *    publication of scientific results based in part on use of the
 *    program.  An acceptable form of acknowledgement is citation of
 *    the article in which the program was described (Matthew
 *    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
 *    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
 *    Parallel Simulation Engine for Molecular Dynamics,"
 *    J. Comput. Chem. 26, pp. 252-271 (2005))
 *
 * 2. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 3. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 */

#include <cstdlib>
#include <cstdio>
#include <cstring>
#include <cmath>
#include <iostream>
#include <string>
#include <map>
#include <fstream>

#include "config.h"

#include "nanorodBuilderCmd.h"
#ifdef HAVE_CGAL
#include "GeometryBuilder.hpp"
#endif
#include "lattice/LatticeFactory.hpp"
#include "utils/MoLocator.hpp"
#include "lattice/Lattice.hpp"
#include "brains/Register.hpp"
#include "brains/SimInfo.hpp"
#include "brains/SimCreator.hpp"
#include "io/DumpWriter.hpp"
#include "math/Vector3.hpp"
#include "math/SquareMatrix3.hpp"
#include "utils/StringUtils.hpp"

using namespace std;
using namespace oopse;
void createMdFile(const std::string&oldMdFileName, 
                  const std::string&newMdFileName,
                  int numMol);

int main(int argc, char *argv []) {
  
  //register force fields
  registerForceFields();
  registerLattice();
  
  gengetopt_args_info args_info;
  std::string latticeType;
  std::string inputFileName;
  std::string outPrefix;
  std::string outMdFileName;
  std::string outInitFileName;
  std::string outGeomFileName;
  
  
  Lattice *simpleLat;
  int numMol;
  double latticeConstant;
  std::vector<double> lc;
  double mass;
  const double rhoConvertConst = 1.661;
  double density;
  double rodLength;
  double rodDiameter;
  
  
  int nx, ny, nz;
  Mat3x3d hmat;
  MoLocator *locator;
  std::vector<Vector3d> latticePos;
  std::vector<Vector3d> latticeOrt;
  int numMolPerCell;
  int curMolIndex;
  DumpWriter *writer;
  
  // parse command line arguments
  if (cmdline_parser(argc, argv, &args_info) != 0)
    exit(1);
  
  
        // Check for lib CGAL, if we don't have it, we should exit....
        
#ifndef HAVE_CGAL
                 std::cerr << "nanoRodBuilder requires libCGAL to function, please rebuild OOPSE with libCGAL."
                 << std::endl;
                 exit(1);
#endif
        
        
        
  //get lattice type
  latticeType = UpperCase(args_info.latticetype_arg);
  
  
  simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);
  if (simpleLat == NULL) {
    sprintf(painCave.errMsg, "Lattice Factory can not create %s lattice\n",
            latticeType.c_str());
    painCave.isFatal = 1;
    simError();
  }        
  
  //get input file name
  if (args_info.inputs_num)
    inputFileName = args_info.inputs[0];
  else {
    std::cerr << "You must specify a input file name.\n" << std::endl;
    cmdline_parser_print_help();
    exit(1);
  }
  
  //parse md file and set up the system
  SimCreator oldCreator;
  SimInfo* oldInfo = oldCreator.createSim(inputFileName, false);
  
  if (oldInfo->getNMoleculeStamp()> 1) {
    std::cerr << "can not build nanorod with more than one components"
              << std::endl;
    exit(1);
  }
  
  //get mass of molecule. 
  
  mass = getMolMass(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
  
  //creat lattice
  simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);
  
  if (simpleLat == NULL) {
    std::cerr << "Error in creating lattice" << std::endl;
    exit(1);
  }
  
  numMolPerCell = simpleLat->getNumSitesPerCell();
  
  //calculate lattice constant (in Angstrom)
  //latticeConstant = pow(rhoConvertConst * numMolPerCell * mass / density,
  //                      1.0 / 3.0);
  
  latticeConstant = args_info.latticeCnst_arg;
  rodLength = args_info.length_arg;
  rodDiameter = args_info.width_arg;
  
  //set lattice constant
  lc.push_back(latticeConstant);
  simpleLat->setLatticeConstant(lc);
  
  
  //determine the output file names  
  if (args_info.output_given)
    outInitFileName = args_info.output_arg;
  else
    outInitFileName = getPrefix(inputFileName.c_str()) + ".in";
  
  //creat Molocator
  locator = new MoLocator(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
  
  /*
    Assume we are carving nanorod out of a cublic block of material and that
    the shape the material will fit within that block.... 
    The model in geometry builder assumes the long axis is in the y direction and the x-z plane is the 
    diameter of the particle.            
  */
  // Number of Unit Cells in Length first
  ny = (int)(rodLength/latticeConstant);
  // Number of unit cells in Width
  nx = (int)(rodDiameter/latticeConstant);
  nz = (int)(rodDiameter/latticeConstant);
  
  
  
  // Create geometry for nanocrystal
#ifdef HAVE_CGAL
  GeometryBuilder myGeometry(rodLength,rodDiameter);
#endif
  
  /*
    We have to build the system first to figure out how many molecules
    there are then create a md file and then actually build the
    system.
  */
  
  //place the molecules
  
  curMolIndex = 0;
  
  //get the orientation of the cell sites
  //for the same type of molecule in same lattice, it will not change
  latticeOrt = simpleLat->getLatticePointsOrt();
  
  
  /*
    void BaseLattice::getLatticePointsPos(std::vector<Vector3d>&
    latticePos, int nx, int ny, int nz){
    
    latticePos.resize(nCellSites);
                         
    for( int i=0;i < nCellSites;i++){
    
    latticePos[i][0] = origin[0] + cellSitesPos[i][0] + cellLen[0] * (double(nx) - 0.5);
    latticePos[i][1] = origin[1] + cellSitesPos[i][1] + cellLen[1] * (double(ny) - 0.5);
    latticePos[i][2] = origin[2] + cellSitesPos[i][2] + cellLen[2] * (double(nz) - 0.5);    
    }
    
  */
  
  
  
  
  numMol = 0;
  for(int i = 0; i < nx; i++) {
    for(int j = 0; j < ny; j++) {
      for(int k = 0; k < nz; k++) {
        //if (oldInfo->getNGlobalMolecules() != numMol) {
        
        
        
        //get the position of the cell sites
        simpleLat->getLatticePointsPos(latticePos, i, j, k);
        
        for(int l = 0; l < numMolPerCell; l++) {

#ifdef HAVE_CGAL
          if (myGeometry.isInsidePolyhedron(latticePos[l][0],latticePos[l][1],latticePos[l][2])){
            numMol++;
          }
#endif
        }
      }
    }
  }
  
  
  // needed for writing out new md file.
  
  outPrefix = getPrefix(inputFileName.c_str()) + "_" + latticeType;
  outMdFileName = outPrefix + ".md";
  
  //creat new .md file on fly which corrects the number of molecule     
  createMdFile(inputFileName, outMdFileName, numMol);
  
  if (oldInfo != NULL)
    delete oldInfo;
  
  
  // We need to read in new siminfo object.     
  //parse md file and set up the system
  //SimCreator NewCreator;
  
  SimInfo* NewInfo = oldCreator.createSim(outMdFileName, false);
  
  // This was so much fun the first time, lets do it again.
  
  Molecule* mol;
  SimInfo::MoleculeIterator mi;
  mol = NewInfo->beginMolecule(mi);
  
  for(int i = 0; i < nx; i++) {
    for(int j = 0; j < ny; j++) {
      for(int k = 0; k < nz; k++) {
        
        //get the position of the cell sites
        simpleLat->getLatticePointsPos(latticePos, i, j, k);
        
        for(int l = 0; l < numMolPerCell; l++) {
          if (mol != NULL) {

#ifdef HAVE_GCAL
            if (myGeometry.isInsidePolyhedron(latticePos[l][0],latticePos[l][1],latticePos[l][2])){
              locator->placeMol(latticePos[l], latticeOrt[l], mol);
            }           
#else
            
            locator->placeMol(latticePos[l], latticeOrt[l], mol);
#endif
          } else {
            std::cerr << std::endl;                    
          }
          mol = NewInfo->nextMolecule(mi);
        }
      }
    }
  }
  
  
  
  //fill Hmat
  hmat(0, 0)= nx * latticeConstant;
  hmat(0, 1) = 0.0;
  hmat(0, 2) = 0.0;
  
  hmat(1, 0) = 0.0;
  hmat(1, 1) = ny * latticeConstant;
  hmat(1, 2) = 0.0;
  
  hmat(2, 0) = 0.0;
  hmat(2, 1) = 0.0;
  hmat(2, 2) = nz * latticeConstant;
  
  //set Hmat
  NewInfo->getSnapshotManager()->getCurrentSnapshot()->setHmat(hmat);
  
  
  //create dumpwriter and write out the coordinates
  NewInfo->setFinalConfigFileName(outInitFileName);
  writer = new DumpWriter(NewInfo);
  
  if (writer == NULL) {
    std::cerr << "error in creating DumpWriter" << std::endl;
    exit(1);
    }
  
  writer->writeDump();
  std::cout << "new initial configuration file: " << outInitFileName
            << " is generated." << std::endl;
  
  //delete objects
  
  //delete oldInfo and oldSimSetup
  
  if (NewInfo != NULL)
    delete NewInfo;
  
  if (writer != NULL)
    delete writer;
  delete simpleLat;     
  cmdline_parser_free(&args_info);
  return 0;
}

void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
                  int numMol) {
  ifstream oldMdFile;
  ofstream newMdFile;
  const int MAXLEN = 65535;
  char buffer[MAXLEN];
  
  //create new .md file based on old .md file
  oldMdFile.open(oldMdFileName.c_str());
  newMdFile.open(newMdFileName.c_str());
  
  oldMdFile.getline(buffer, MAXLEN);
  
  while (!oldMdFile.eof()) {
    
    //correct molecule number
    if (strstr(buffer, "nMol") != NULL) {
      sprintf(buffer, "\tnMol = %i;", numMol);                          
      newMdFile << buffer << std::endl;
    } else
      newMdFile << buffer << std::endl;
    
    oldMdFile.getline(buffer, MAXLEN);
  }
  
  oldMdFile.close();
  newMdFile.close();
}

Revision:	499
Committed:	Thu Apr 14 16:10:57 2005 UTC (20 years ago) by chuckv
File size:	10899 byte(s)
Log Message:	nanorodbuilder now exit's when libCGAL is not present.
#	User	Rev	Content
1	chuckv	467	/*
2			* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3			*
4			* The University of Notre Dame grants you ("Licensee") a
5			* non-exclusive, royalty free, license to use, modify and
6			* redistribute this software in source and binary code form, provided
7			* that the following conditions are met:
8			*
9			* 1. Acknowledgement of the program authors must be made in any
10			* publication of scientific results based in part on use of the
11			* program. An acceptable form of acknowledgement is citation of
12			* the article in which the program was described (Matthew
13			* A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14			* J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15			* Parallel Simulation Engine for Molecular Dynamics,"
16			* J. Comput. Chem. 26, pp. 252-271 (2005))
17			*
18			* 2. Redistributions of source code must retain the above copyright
19			* notice, this list of conditions and the following disclaimer.
20			*
21			* 3. Redistributions in binary form must reproduce the above copyright
22			* notice, this list of conditions and the following disclaimer in the
23			* documentation and/or other materials provided with the
24			* distribution.
25			*
26			* This software is provided "AS IS," without a warranty of any
27			* kind. All express or implied conditions, representations and
28			* warranties, including any implied warranty of merchantability,
29			* fitness for a particular purpose or non-infringement, are hereby
30			* excluded. The University of Notre Dame and its licensors shall not
31			* be liable for any damages suffered by licensee as a result of
32			* using, modifying or distributing the software or its
33			* derivatives. In no event will the University of Notre Dame or its
34			* licensors be liable for any lost revenue, profit or data, or for
35			* direct, indirect, special, consequential, incidental or punitive
36			* damages, however caused and regardless of the theory of liability,
37			* arising out of the use of or inability to use software, even if the
38			* University of Notre Dame has been advised of the possibility of
39			* such damages.
40			*/
41	gezelter	493
42	chuckv	467	#include <cstdlib>
43			#include <cstdio>
44			#include <cstring>
45			#include <cmath>
46			#include <iostream>
47			#include <string>
48			#include <map>
49			#include <fstream>
50
51	gezelter	493	#include "config.h"
52
53	chuckv	467	#include "nanorodBuilderCmd.h"
54	gezelter	493	#ifdef HAVE_CGAL
55			#include "GeometryBuilder.hpp"
56			#endif
57	gezelter	481	#include "lattice/LatticeFactory.hpp"
58			#include "utils/MoLocator.hpp"
59			#include "lattice/Lattice.hpp"
60	chuckv	467	#include "brains/Register.hpp"
61			#include "brains/SimInfo.hpp"
62			#include "brains/SimCreator.hpp"
63			#include "io/DumpWriter.hpp"
64			#include "math/Vector3.hpp"
65			#include "math/SquareMatrix3.hpp"
66			#include "utils/StringUtils.hpp"
67
68			using namespace std;
69			using namespace oopse;
70	gezelter	493	void createMdFile(const std::string&oldMdFileName,
71			const std::string&newMdFileName,
72	chuckv	467	int numMol);
73
74			int main(int argc, char *argv []) {
75	gezelter	493
76			//register force fields
77			registerForceFields();
78			registerLattice();
79
80			gengetopt_args_info args_info;
81			std::string latticeType;
82			std::string inputFileName;
83			std::string outPrefix;
84			std::string outMdFileName;
85			std::string outInitFileName;
86			std::string outGeomFileName;
87
88
89			Lattice *simpleLat;
90			int numMol;
91			double latticeConstant;
92			std::vector<double> lc;
93			double mass;
94			const double rhoConvertConst = 1.661;
95			double density;
96			double rodLength;
97			double rodDiameter;
98
99
100			int nx, ny, nz;
101			Mat3x3d hmat;
102			MoLocator *locator;
103			std::vector<Vector3d> latticePos;
104			std::vector<Vector3d> latticeOrt;
105			int numMolPerCell;
106			int curMolIndex;
107			DumpWriter *writer;
108
109			// parse command line arguments
110			if (cmdline_parser(argc, argv, &args_info) != 0)
111			exit(1);
112
113
114	chuckv	499	// Check for lib CGAL, if we don't have it, we should exit....
115
116			#ifndef HAVE_CGAL
117			std::cerr << "nanoRodBuilder requires libCGAL to function, please rebuild OOPSE with libCGAL."
118			<< std::endl;
119			exit(1);
120			#endif
121
122
123
124	gezelter	493	//get lattice type
125			latticeType = UpperCase(args_info.latticetype_arg);
126
127
128			simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);
129			if (simpleLat == NULL) {
130			sprintf(painCave.errMsg, "Lattice Factory can not create %s lattice\n",
131			latticeType.c_str());
132			painCave.isFatal = 1;
133			simError();
134			}
135
136			//get input file name
137			if (args_info.inputs_num)
138			inputFileName = args_info.inputs[0];
139			else {
140			std::cerr << "You must specify a input file name.\n" << std::endl;
141			cmdline_parser_print_help();
142			exit(1);
143			}
144
145			//parse md file and set up the system
146			SimCreator oldCreator;
147			SimInfo* oldInfo = oldCreator.createSim(inputFileName, false);
148
149			if (oldInfo->getNMoleculeStamp()> 1) {
150			std::cerr << "can not build nanorod with more than one components"
151			<< std::endl;
152			exit(1);
153			}
154
155			//get mass of molecule.
156
157			mass = getMolMass(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
158
159			//creat lattice
160			simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);
161
162			if (simpleLat == NULL) {
163			std::cerr << "Error in creating lattice" << std::endl;
164			exit(1);
165			}
166
167			numMolPerCell = simpleLat->getNumSitesPerCell();
168
169			//calculate lattice constant (in Angstrom)
170			//latticeConstant = pow(rhoConvertConst * numMolPerCell * mass / density,
171			// 1.0 / 3.0);
172
173			latticeConstant = args_info.latticeCnst_arg;
174			rodLength = args_info.length_arg;
175			rodDiameter = args_info.width_arg;
176
177			//set lattice constant
178			lc.push_back(latticeConstant);
179			simpleLat->setLatticeConstant(lc);
180
181
182			//determine the output file names
183			if (args_info.output_given)
184			outInitFileName = args_info.output_arg;
185			else
186			outInitFileName = getPrefix(inputFileName.c_str()) + ".in";
187
188			//creat Molocator
189			locator = new MoLocator(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
190
191			/*
192			Assume we are carving nanorod out of a cublic block of material and that
193			the shape the material will fit within that block....
194			The model in geometry builder assumes the long axis is in the y direction and the x-z plane is the
195			diameter of the particle.
196			*/
197			// Number of Unit Cells in Length first
198			ny = (int)(rodLength/latticeConstant);
199			// Number of unit cells in Width
200			nx = (int)(rodDiameter/latticeConstant);
201			nz = (int)(rodDiameter/latticeConstant);
202
203
204
205			// Create geometry for nanocrystal
206	chuckv	499	#ifdef HAVE_CGAL
207	gezelter	493	GeometryBuilder myGeometry(rodLength,rodDiameter);
208			#endif
209
210			/*
211			We have to build the system first to figure out how many molecules
212			there are then create a md file and then actually build the
213			system.
214			*/
215
216			//place the molecules
217
218			curMolIndex = 0;
219
220			//get the orientation of the cell sites
221			//for the same type of molecule in same lattice, it will not change
222			latticeOrt = simpleLat->getLatticePointsOrt();
223
224
225			/*
226			void BaseLattice::getLatticePointsPos(std::vector<Vector3d>&
227			latticePos, int nx, int ny, int nz){
228	chuckv	467
229	gezelter	493	latticePos.resize(nCellSites);
230
231			for( int i=0;i < nCellSites;i++){
232	chuckv	467
233	gezelter	493	latticePos[i][0] = origin[0] + cellSitesPos[i][0] + cellLen[0] * (double(nx) - 0.5);
234			latticePos[i][1] = origin[1] + cellSitesPos[i][1] + cellLen[1] * (double(ny) - 0.5);
235			latticePos[i][2] = origin[2] + cellSitesPos[i][2] + cellLen[2] * (double(nz) - 0.5);
236	chuckv	467	}
237
238	gezelter	493	*/
239
240
241
242
243			numMol = 0;
244			for(int i = 0; i < nx; i++) {
245			for(int j = 0; j < ny; j++) {
246			for(int k = 0; k < nz; k++) {
247			//if (oldInfo->getNGlobalMolecules() != numMol) {
248	chuckv	467
249	gezelter	493
250
251			//get the position of the cell sites
252			simpleLat->getLatticePointsPos(latticePos, i, j, k);
253
254			for(int l = 0; l < numMolPerCell; l++) {
255	chuckv	467
256	chuckv	499	#ifdef HAVE_CGAL
257	gezelter	493	if (myGeometry.isInsidePolyhedron(latticePos[l][0],latticePos[l][1],latticePos[l][2])){
258			numMol++;
259			}
260			#endif
261			}
262			}
263	chuckv	467	}
264	gezelter	493	}
265
266
267			// needed for writing out new md file.
268
269			outPrefix = getPrefix(inputFileName.c_str()) + "_" + latticeType;
270			outMdFileName = outPrefix + ".md";
271
272			//creat new .md file on fly which corrects the number of molecule
273			createMdFile(inputFileName, outMdFileName, numMol);
274
275			if (oldInfo != NULL)
276			delete oldInfo;
277
278
279			// We need to read in new siminfo object.
280			//parse md file and set up the system
281			//SimCreator NewCreator;
282
283			SimInfo* NewInfo = oldCreator.createSim(outMdFileName, false);
284
285			// This was so much fun the first time, lets do it again.
286
287			Molecule* mol;
288			SimInfo::MoleculeIterator mi;
289			mol = NewInfo->beginMolecule(mi);
290
291			for(int i = 0; i < nx; i++) {
292			for(int j = 0; j < ny; j++) {
293			for(int k = 0; k < nz; k++) {
294
295			//get the position of the cell sites
296			simpleLat->getLatticePointsPos(latticePos, i, j, k);
297
298			for(int l = 0; l < numMolPerCell; l++) {
299			if (mol != NULL) {
300	chuckv	467
301	gezelter	493	#ifdef HAVE_GCAL
302			if (myGeometry.isInsidePolyhedron(latticePos[l][0],latticePos[l][1],latticePos[l][2])){
303			locator->placeMol(latticePos[l], latticeOrt[l], mol);
304			}
305			#else
306
307			locator->placeMol(latticePos[l], latticeOrt[l], mol);
308			#endif
309			} else {
310			std::cerr << std::endl;
311			}
312			mol = NewInfo->nextMolecule(mi);
313			}
314			}
315	chuckv	467	}
316	gezelter	493	}
317
318
319
320			//fill Hmat
321			hmat(0, 0)= nx * latticeConstant;
322			hmat(0, 1) = 0.0;
323			hmat(0, 2) = 0.0;
324
325			hmat(1, 0) = 0.0;
326			hmat(1, 1) = ny * latticeConstant;
327			hmat(1, 2) = 0.0;
328
329			hmat(2, 0) = 0.0;
330			hmat(2, 1) = 0.0;
331			hmat(2, 2) = nz * latticeConstant;
332
333			//set Hmat
334			NewInfo->getSnapshotManager()->getCurrentSnapshot()->setHmat(hmat);
335
336
337			//create dumpwriter and write out the coordinates
338			NewInfo->setFinalConfigFileName(outInitFileName);
339			writer = new DumpWriter(NewInfo);
340
341			if (writer == NULL) {
342			std::cerr << "error in creating DumpWriter" << std::endl;
343			exit(1);
344			}
345
346			writer->writeDump();
347			std::cout << "new initial configuration file: " << outInitFileName
348			<< " is generated." << std::endl;
349
350			//delete objects
351
352			//delete oldInfo and oldSimSetup
353
354			if (NewInfo != NULL)
355			delete NewInfo;
356
357			if (writer != NULL)
358			delete writer;
359			delete simpleLat;
360			cmdline_parser_free(&args_info);
361			return 0;
362	chuckv	467	}
363
364			void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
365			int numMol) {
366	gezelter	493	ifstream oldMdFile;
367			ofstream newMdFile;
368			const int MAXLEN = 65535;
369			char buffer[MAXLEN];
370
371			//create new .md file based on old .md file
372			oldMdFile.open(oldMdFileName.c_str());
373			newMdFile.open(newMdFileName.c_str());
374
375			oldMdFile.getline(buffer, MAXLEN);
376
377			while (!oldMdFile.eof()) {
378
379			//correct molecule number
380			if (strstr(buffer, "nMol") != NULL) {
381			sprintf(buffer, "\tnMol = %i;", numMol);
382			newMdFile << buffer << std::endl;
383			} else
384			newMdFile << buffer << std::endl;
385
386	chuckv	467	oldMdFile.getline(buffer, MAXLEN);
387	gezelter	493	}
388
389			oldMdFile.close();
390			newMdFile.close();
391	chuckv	467	}
392