src/integrators/SMIPDForceManager.cpp

/*
 * Copyright (c) 2008 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Acknowledgement of the program authors must be made in any
 *    publication of scientific results based in part on use of the
 *    program.  An acceptable form of acknowledgement is citation of
 *    the article in which the program was described (Matthew
 *    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
 *    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
 *    Parallel Simulation Engine for Molecular Dynamics,"
 *    J. Comput. Chem. 26, pp. 252-271 (2005))
 *
 * 2. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 3. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 */
#include <fstream> 
#include <iostream>
#include "integrators/SMIPDForceManager.hpp"
#include "utils/OOPSEConstant.hpp"
#include "math/ConvexHull.hpp"
#include "math/Triangle.hpp"

namespace oopse {

  SMIPDForceManager::SMIPDForceManager(SimInfo* info) : ForceManager(info) {

    simParams = info->getSimParams();
    veloMunge = new Velocitizer(info);
    
    // Create Hull, Convex Hull for now, other options later.
    
    surfaceMesh_ = new ConvexHull();
    
    /* Check that the simulation has target pressure and target
       temperature set */
    
    if (!simParams->haveTargetTemp()) {
      sprintf(painCave.errMsg, 
              "SMIPDynamics error: You can't use the SMIPD integrator\n"
              "\twithout a targetTemp (K)!\n");      
      painCave.isFatal = 1;
      painCave.severity = OOPSE_ERROR;
      simError();
    } else {
      targetTemp_ = simParams->getTargetTemp();
    }
    
    if (!simParams->haveTargetPressure()) {
      sprintf(painCave.errMsg, 
              "SMIPDynamics error: You can't use the SMIPD integrator\n"
              "\twithout a targetPressure (atm)!\n");      
      painCave.isFatal = 1;
      simError();
    } else {
      // Convert pressure from atm -> amu/(fs^2*Ang)
      targetPressure_ = simParams->getTargetPressure() / 
        OOPSEConstant::pressureConvert;
    }
   
    if (simParams->getUsePeriodicBoundaryConditions()) {
      sprintf(painCave.errMsg, 
              "SMIPDynamics error: You can't use the SMIPD integrator\n"
              "\twith periodic boundary conditions!\n");    
      painCave.isFatal = 1;
      simError();
    } 
    
    if (!simParams->haveThermalConductivity()) {
      sprintf(painCave.errMsg, 
              "SMIPDynamics error: You can't use the SMIPD integrator\n"
              "\twithout a thermalConductivity (W m^-1 K^-1)!\n");
      painCave.isFatal = 1;
      painCave.severity = OOPSE_ERROR;
      simError();
    }else{
      thermalConductivity_ = simParams->getThermalConductivity() * 
        OOPSEConstant::thermalConductivityConvert;
    }

    if (!simParams->haveThermalLength()) {
      sprintf(painCave.errMsg, 
              "SMIPDynamics error: You can't use the SMIPD integrator\n"
              "\twithout a thermalLength (Angstroms)!\n");
      painCave.isFatal = 1;
      painCave.severity = OOPSE_ERROR;
      simError();
    }else{
      thermalLength_ = simParams->getThermalLength();
    }
    
    dt_ = simParams->getDt();
  
    variance_ = 2.0 * OOPSEConstant::kb * targetTemp_ / dt_;

    // Build a vector of integrable objects to determine if the are
    // surface atoms
    Molecule* mol;
    StuntDouble* integrableObject;
    SimInfo::MoleculeIterator i;
    Molecule::IntegrableObjectIterator  j;

    for (mol = info_->beginMolecule(i); mol != NULL; 
         mol = info_->nextMolecule(i)) {          
      for (integrableObject = mol->beginIntegrableObject(j); 
           integrableObject != NULL;
           integrableObject = mol->nextIntegrableObject(j)) {   
        localSites_.push_back(integrableObject);
      }
    }   
  }  
   
  void SMIPDForceManager::postCalculation(bool needStress){
    SimInfo::MoleculeIterator i;
    Molecule::IntegrableObjectIterator  j;
    Molecule* mol;
    StuntDouble* integrableObject;
  
    // Compute surface Mesh

    surfaceMesh_->computeHull(localSites_);

    // Get total area and number of surface stunt doubles
    RealType area = surfaceMesh_->getArea();
    int nSurfaceSDs = surfaceMesh_->getNs();
    std::vector<Triangle> sMesh = surfaceMesh_->getMesh();
    int nTriangles = sMesh.size();

    // Generate all of the necessary random forces
    std::vector<RealType>  randNums = genTriangleForces(nTriangles, variance_);

    // Loop over the mesh faces and apply external pressure to each 
    // of the faces
    std::vector<Triangle>::iterator face;
    std::vector<StuntDouble*>::iterator vertex;
    int thisFacet = 0;
    for (face = sMesh.begin(); face != sMesh.end(); ++face){
     
      Triangle thisTriangle = *face;
      std::vector<StuntDouble*> vertexSDs = thisTriangle.getVertices();
      RealType thisArea = thisTriangle.getArea(); 
      Vector3d unitNormal = thisTriangle.getNormal();
      unitNormal.normalize();
      Vector3d centroid = thisTriangle.getCentroid();
      Vector3d facetVel = thisTriangle.getFacetVelocity();
      RealType thisMass = thisTriangle.getFacetMass();

      // gamma is the drag coefficient normal to the face of the triangle      
      RealType gamma = thermalConductivity_ * thisMass * thisArea 
        / (2.0 * thermalLength_ * OOPSEConstant::kB);
      
      RealType extPressure = - (targetPressure_ * thisArea) / 
        OOPSEConstant::energyConvert;

      RealType randomForce = randNums[thisFacet++] * sqrt(gamma);
      RealType dragForce = -gamma * dot(facetVel, unitNormal);

      Vector3d langevinForce = (extPressure + randomForce + dragForce) * 
        unitNormal;
      
      // Apply triangle force to stuntdouble vertices 
      for (vertex = vertexSDs.begin(); vertex != vertexSDs.end(); ++vertex){
        if ((*vertex) != NULL){ 
          Vector3d vertexForce = langevinForce / 3.0;
          (*vertex)->addFrc(vertexForce);          
          if ((*vertex)->isDirectional()){          
            Vector3d vertexPos = (*vertex)->getPos();
            Vector3d vertexCentroidVector = vertexPos - centroid;
            (*vertex)->addTrq(cross(vertexCentroidVector,vertexForce));
          }
        }  
      }
    } 
    
    veloMunge->removeComDrift();
    veloMunge->removeAngularDrift();
    
    Snapshot* currSnapshot = info_->getSnapshotManager()->getCurrentSnapshot();
    currSnapshot->setVolume(surfaceMesh_->getVolume());    
    ForceManager::postCalculation(needStress);   
  }
  
  
  std::vector<RealType> SMIPDForceManager::genTriangleForces(int nTriangles, 
                                                             RealType variance)
  {
    
    // zero fill the random vector before starting:
    std::vector<RealType> gaussRand;
    gaussRand.resize(nTriangles);
    std::fill(gaussRand.begin(), gaussRand.end(), 0.0);
    
#ifdef IS_MPI
    if (worldRank == 0) {
#endif
      for (int i = 0; i < nTriangles; i++) {
        gaussRand[i] = randNumGen_.randNorm(0.0, variance);
      }
#ifdef IS_MPI
    }
#endif
    
    // push these out to the other processors
    
#ifdef IS_MPI
    if (worldRank == 0) {
      MPI::COMM_WORLD.Bcast(&gaussRand[0], nTriangles, MPI::REALTYPE, 0);
    } else {
      MPI::COMM_WORLD.Bcast(&gaussRand[0], nTriangles, MPI::REALTYPE, 0);
    }
#endif
    
    return gaussRand;
  }
}
Revision:	1357
Committed:	Thu Jul 23 18:49:45 2009 UTC (15 years, 9 months ago) by gezelter
Original Path:	*trunk/src/integrators/SMIPDForceManager.cpp*
File size:	8605 byte(s)
Log Message:	New hotness
#	User	Rev	Content
1	chuckv	1293	/*
2			* Copyright (c) 2008 The University of Notre Dame. All Rights Reserved.
3			*
4			* The University of Notre Dame grants you ("Licensee") a
5			* non-exclusive, royalty free, license to use, modify and
6			* redistribute this software in source and binary code form, provided
7			* that the following conditions are met:
8			*
9			* 1. Acknowledgement of the program authors must be made in any
10			* publication of scientific results based in part on use of the
11			* program. An acceptable form of acknowledgement is citation of
12			* the article in which the program was described (Matthew
13			* A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14			* J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15			* Parallel Simulation Engine for Molecular Dynamics,"
16			* J. Comput. Chem. 26, pp. 252-271 (2005))
17			*
18			* 2. Redistributions of source code must retain the above copyright
19			* notice, this list of conditions and the following disclaimer.
20			*
21			* 3. Redistributions in binary form must reproduce the above copyright
22			* notice, this list of conditions and the following disclaimer in the
23			* documentation and/or other materials provided with the
24			* distribution.
25			*
26			* This software is provided "AS IS," without a warranty of any
27			* kind. All express or implied conditions, representations and
28			* warranties, including any implied warranty of merchantability,
29			* fitness for a particular purpose or non-infringement, are hereby
30			* excluded. The University of Notre Dame and its licensors shall not
31			* be liable for any damages suffered by licensee as a result of
32			* using, modifying or distributing the software or its
33			* derivatives. In no event will the University of Notre Dame or its
34			* licensors be liable for any lost revenue, profit or data, or for
35			* direct, indirect, special, consequential, incidental or punitive
36			* damages, however caused and regardless of the theory of liability,
37			* arising out of the use of or inability to use software, even if the
38			* University of Notre Dame has been advised of the possibility of
39			* such damages.
40			*/
41			#include <fstream>
42			#include <iostream>
43			#include "integrators/SMIPDForceManager.hpp"
44			#include "utils/OOPSEConstant.hpp"
45			#include "math/ConvexHull.hpp"
46			#include "math/Triangle.hpp"
47
48			namespace oopse {
49	gezelter	1324
50	gezelter	1344	SMIPDForceManager::SMIPDForceManager(SimInfo* info) : ForceManager(info) {
51
52	chuckv	1293	simParams = info->getSimParams();
53	chuckv	1325	veloMunge = new Velocitizer(info);
54	chuckv	1293
55			// Create Hull, Convex Hull for now, other options later.
56	gezelter	1324
57	chuckv	1293	surfaceMesh_ = new ConvexHull();
58
59			/* Check that the simulation has target pressure and target
60	chuckv	1325	temperature set */
61	chuckv	1323
62	chuckv	1293	if (!simParams->haveTargetTemp()) {
63	gezelter	1324	sprintf(painCave.errMsg,
64			"SMIPDynamics error: You can't use the SMIPD integrator\n"
65	gezelter	1357	"\twithout a targetTemp (K)!\n");
66	chuckv	1293	painCave.isFatal = 1;
67			painCave.severity = OOPSE_ERROR;
68			simError();
69			} else {
70			targetTemp_ = simParams->getTargetTemp();
71			}
72	chuckv	1323
73	chuckv	1293	if (!simParams->haveTargetPressure()) {
74	gezelter	1324	sprintf(painCave.errMsg,
75			"SMIPDynamics error: You can't use the SMIPD integrator\n"
76	gezelter	1357	"\twithout a targetPressure (atm)!\n");
77	chuckv	1293	painCave.isFatal = 1;
78			simError();
79			} else {
80	gezelter	1324	// Convert pressure from atm -> amu/(fs^2*Ang)
81			targetPressure_ = simParams->getTargetPressure() /
82			OOPSEConstant::pressureConvert;
83	chuckv	1293	}
84
85			if (simParams->getUsePeriodicBoundaryConditions()) {
86	gezelter	1324	sprintf(painCave.errMsg,
87			"SMIPDynamics error: You can't use the SMIPD integrator\n"
88	gezelter	1357	"\twith periodic boundary conditions!\n");
89	chuckv	1293	painCave.isFatal = 1;
90			simError();
91			}
92	gezelter	1324
93	gezelter	1355	if (!simParams->haveThermalConductivity()) {
94	gezelter	1324	sprintf(painCave.errMsg,
95			"SMIPDynamics error: You can't use the SMIPD integrator\n"
96	gezelter	1357	"\twithout a thermalConductivity (W m^-1 K^-1)!\n");
97	chuckv	1316	painCave.isFatal = 1;
98			painCave.severity = OOPSE_ERROR;
99			simError();
100	chuckv	1323	}else{
101	gezelter	1356	thermalConductivity_ = simParams->getThermalConductivity() *
102			OOPSEConstant::thermalConductivityConvert;
103	chuckv	1316	}
104	gezelter	1355
105			if (!simParams->haveThermalLength()) {
106			sprintf(painCave.errMsg,
107			"SMIPDynamics error: You can't use the SMIPD integrator\n"
108	gezelter	1357	"\twithout a thermalLength (Angstroms)!\n");
109	gezelter	1355	painCave.isFatal = 1;
110			painCave.severity = OOPSE_ERROR;
111			simError();
112			}else{
113			thermalLength_ = simParams->getThermalLength();
114			}
115	gezelter	1324
116	chuckv	1323	dt_ = simParams->getDt();
117	gezelter	1324
118			variance_ = 2.0 * OOPSEConstant::kb * targetTemp_ / dt_;
119	chuckv	1307
120	gezelter	1344	// Build a vector of integrable objects to determine if the are
121			// surface atoms
122	chuckv	1293	Molecule* mol;
123			StuntDouble* integrableObject;
124			SimInfo::MoleculeIterator i;
125	gezelter	1344	Molecule::IntegrableObjectIterator j;
126	chuckv	1323
127	gezelter	1324	for (mol = info_->beginMolecule(i); mol != NULL;
128			mol = info_->nextMolecule(i)) {
129			for (integrableObject = mol->beginIntegrableObject(j);
130			integrableObject != NULL;
131	chuckv	1293	integrableObject = mol->nextIntegrableObject(j)) {
132			localSites_.push_back(integrableObject);
133			}
134	gezelter	1324	}
135	chuckv	1293	}
136	chuckv	1325
137	chuckv	1293	void SMIPDForceManager::postCalculation(bool needStress){
138			SimInfo::MoleculeIterator i;
139			Molecule::IntegrableObjectIterator j;
140			Molecule* mol;
141			StuntDouble* integrableObject;
142	chuckv	1325
143	gezelter	1324	// Compute surface Mesh
144	gezelter	1357
145	chuckv	1293	surfaceMesh_->computeHull(localSites_);
146	chuckv	1325
147	gezelter	1324	// Get total area and number of surface stunt doubles
148			RealType area = surfaceMesh_->getArea();
149	chuckv	1325	int nSurfaceSDs = surfaceMesh_->getNs();
150	chuckv	1308	std::vector<Triangle> sMesh = surfaceMesh_->getMesh();
151	chuckv	1307	int nTriangles = sMesh.size();
152
153	gezelter	1344	// Generate all of the necessary random forces
154	gezelter	1355	std::vector<RealType> randNums = genTriangleForces(nTriangles, variance_);
155	gezelter	1344
156	chuckv	1325	// Loop over the mesh faces and apply external pressure to each
157			// of the faces
158	chuckv	1308	std::vector<Triangle>::iterator face;
159	chuckv	1302	std::vector<StuntDouble*>::iterator vertex;
160	gezelter	1344	int thisFacet = 0;
161	chuckv	1293	for (face = sMesh.begin(); face != sMesh.end(); ++face){
162
163	chuckv	1308	Triangle thisTriangle = *face;
164			std::vector<StuntDouble*> vertexSDs = thisTriangle.getVertices();
165	chuckv	1316	RealType thisArea = thisTriangle.getArea();
166	chuckv	1308	Vector3d unitNormal = thisTriangle.getNormal();
167	chuckv	1302	unitNormal.normalize();
168	chuckv	1308	Vector3d centroid = thisTriangle.getCentroid();
169	gezelter	1344	Vector3d facetVel = thisTriangle.getFacetVelocity();
170	gezelter	1355	RealType thisMass = thisTriangle.getFacetMass();
171	gezelter	1344
172	gezelter	1355	// gamma is the drag coefficient normal to the face of the triangle
173	gezelter	1357	RealType gamma = thermalConductivity_ * thisMass * thisArea
174	gezelter	1356	/ (2.0 * thermalLength_ * OOPSEConstant::kB);
175	gezelter	1355
176			RealType extPressure = - (targetPressure_ * thisArea) /
177			OOPSEConstant::energyConvert;
178	gezelter	1344
179	gezelter	1355	RealType randomForce = randNums[thisFacet++] * sqrt(gamma);
180			RealType dragForce = -gamma * dot(facetVel, unitNormal);
181	gezelter	1344
182	gezelter	1355	Vector3d langevinForce = (extPressure + randomForce + dragForce) *
183			unitNormal;
184
185	gezelter	1344	// Apply triangle force to stuntdouble vertices
186	chuckv	1325	for (vertex = vertexSDs.begin(); vertex != vertexSDs.end(); ++vertex){
187			if ((*vertex) != NULL){
188	gezelter	1344	Vector3d vertexForce = langevinForce / 3.0;
189			(*vertex)->addFrc(vertexForce);
190	chuckv	1325	if ((*vertex)->isDirectional()){
191	chuckv	1307	Vector3d vertexPos = (*vertex)->getPos();
192			Vector3d vertexCentroidVector = vertexPos - centroid;
193			(*vertex)->addTrq(cross(vertexCentroidVector,vertexForce));
194			}
195			}
196	chuckv	1293	}
197	chuckv	1302	}
198	gezelter	1355
199	chuckv	1325	veloMunge->removeComDrift();
200			veloMunge->removeAngularDrift();
201	gezelter	1355
202	chuckv	1302	Snapshot* currSnapshot = info_->getSnapshotManager()->getCurrentSnapshot();
203	chuckv	1316	currSnapshot->setVolume(surfaceMesh_->getVolume());
204	chuckv	1302	ForceManager::postCalculation(needStress);
205	chuckv	1293	}
206	gezelter	1344
207	gezelter	1355
208			std::vector<RealType> SMIPDForceManager::genTriangleForces(int nTriangles,
209	gezelter	1344	RealType variance)
210			{
211	chuckv	1325
212	gezelter	1344	// zero fill the random vector before starting:
213	gezelter	1355	std::vector<RealType> gaussRand;
214	gezelter	1344	gaussRand.resize(nTriangles);
215	gezelter	1355	std::fill(gaussRand.begin(), gaussRand.end(), 0.0);
216	chuckv	1325
217	gezelter	1344	#ifdef IS_MPI
218			if (worldRank == 0) {
219			#endif
220			for (int i = 0; i < nTriangles; i++) {
221	gezelter	1355	gaussRand[i] = randNumGen_.randNorm(0.0, variance);
222	gezelter	1344	}
223			#ifdef IS_MPI
224			}
225			#endif
226	chuckv	1325
227	gezelter	1344	// push these out to the other processors
228
229			#ifdef IS_MPI
230			if (worldRank == 0) {
231	gezelter	1355	MPI::COMM_WORLD.Bcast(&gaussRand[0], nTriangles, MPI::REALTYPE, 0);
232	gezelter	1344	} else {
233	gezelter	1355	MPI::COMM_WORLD.Bcast(&gaussRand[0], nTriangles, MPI::REALTYPE, 0);
234	gezelter	1344	}
235			#endif
236
237			return gaussRand;
238			}
239	chuckv	1293	}