ViewVC Help

View File | Revision Log | Show Annotations | View Changeset | Root Listing

root/OpenMD/branches/development/src/brains/SimInfo.cpp

Comparing trunk/src/brains/SimInfo.cpp (file contents):
Revision 124 by chuckv, Wed Oct 20 20:46:20 2004 UTC vs.
Revision 1024 by tim, Wed Aug 30 18:42:29 2006 UTC

#	Line 1 | Line 1
1	<	#include <stdlib.h>
2	<	#include <string.h>
3	<	#include <math.h>
1	>	/*
2	>	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3	>	*
4	>	* The University of Notre Dame grants you ("Licensee") a
5	>	* non-exclusive, royalty free, license to use, modify and
6	>	* redistribute this software in source and binary code form, provided
7	>	* that the following conditions are met:
8	>	*
9	>	* 1. Acknowledgement of the program authors must be made in any
10	>	*    publication of scientific results based in part on use of the
11	>	*    program.  An acceptable form of acknowledgement is citation of
12	>	*    the article in which the program was described (Matthew
13	>	*    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14	>	*    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15	>	*    Parallel Simulation Engine for Molecular Dynamics,"
16	>	*    J. Comput. Chem. 26, pp. 252-271 (2005))
17	>	*
18	>	* 2. Redistributions of source code must retain the above copyright
19	>	*    notice, this list of conditions and the following disclaimer.
20	>	*
21	>	* 3. Redistributions in binary form must reproduce the above copyright
22	>	*    notice, this list of conditions and the following disclaimer in the
23	>	*    documentation and/or other materials provided with the
24	>	*    distribution.
25	>	*
26	>	* This software is provided "AS IS," without a warranty of any
27	>	* kind. All express or implied conditions, representations and
28	>	* warranties, including any implied warranty of merchantability,
29	>	* fitness for a particular purpose or non-infringement, are hereby
30	>	* excluded.  The University of Notre Dame and its licensors shall not
31	>	* be liable for any damages suffered by licensee as a result of
32	>	* using, modifying or distributing the software or its
33	>	* derivatives. In no event will the University of Notre Dame or its
34	>	* licensors be liable for any lost revenue, profit or data, or for
35	>	* direct, indirect, special, consequential, incidental or punitive
36	>	* damages, however caused and regardless of the theory of liability,
37	>	* arising out of the use of or inability to use software, even if the
38	>	* University of Notre Dame has been advised of the possibility of
39	>	* such damages.
40	>	*/
41	>
42	>	/**
43	>	* @file SimInfo.cpp
44	>	* @author    tlin
45	>	* @date  11/02/2004
46	>	* @version 1.0
47	>	*/
48
49	<	#include <iostream>
50	<	using namespace std;
49	>	#include <algorithm>
50	>	#include <set>
51	>	#include <map>
52
53		#include "brains/SimInfo.hpp"
54	<	#define __C
55	<	#include "brains/fSimulation.h"
54	>	#include "math/Vector3.hpp"
55	>	#include "primitives/Molecule.hpp"
56	>	#include "primitives/StuntDouble.hpp"
57	>	#include "UseTheForce/fCutoffPolicy.h"
58	>	#include "UseTheForce/DarkSide/fElectrostaticSummationMethod.h"
59	>	#include "UseTheForce/DarkSide/fElectrostaticScreeningMethod.h"
60	>	#include "UseTheForce/DarkSide/fSwitchingFunctionType.h"
61	>	#include "UseTheForce/doForces_interface.h"
62	>	#include "UseTheForce/DarkSide/electrostatic_interface.h"
63	>	#include "UseTheForce/DarkSide/switcheroo_interface.h"
64	>	#include "utils/MemoryUtils.hpp"
65		#include "utils/simError.h"
66	<	#include "UseTheForce/DarkSide/simulation_interface.h"
67	<	#include "UseTheForce/notifyCutoffs_interface.h"
66	>	#include "selection/SelectionManager.hpp"
67	>	#include "io/ForceFieldOptions.hpp"
68	>	#include "UseTheForce/ForceField.hpp"
69
15	–	//#include "UseTheForce/fortranWrappers.hpp"
16	–
17	–	#include "math/MatVec3.h"
18	–
70		#ifdef IS_MPI
71	<	#include "brains/mpiSimulation.hpp"
72	<	#endif
71	>	#include "UseTheForce/mpiComponentPlan.h"
72	>	#include "UseTheForce/DarkSide/simParallel_interface.h"
73	>	#endif
74
75	<	inline double roundMe( double x ){
76	<	return ( x >= 0 ) ? floor( x + 0.5 ) : ceil( x - 0.5 );
77	<	}
78	<
79	<	inline double min( double a, double b ){
80	<	return (a < b ) ? a : b;
81	<	}
75	>	namespace oopse {
76	>	std::set<int> getRigidSet(int index, std::map<int, std::set<int> >& container) {
77	>	std::map<int, std::set<int> >::iterator i = container.find(index);
78	>	std::set<int> result;
79	>	if (i != container.end()) {
80	>	result = i->second;
81	>	}
82
83	<	SimInfo* currentInfo;
84	<
33	<	SimInfo::SimInfo(){
34	<
35	<	n_constraints = 0;
36	<	nZconstraints = 0;
37	<	n_oriented = 0;
38	<	n_dipoles = 0;
39	<	ndf = 0;
40	<	ndfRaw = 0;
41	<	nZconstraints = 0;
42	<	the_integrator = NULL;
43	<	setTemp = 0;
44	<	thermalTime = 0.0;
45	<	currentTime = 0.0;
46	<	rCut = 0.0;
47	<	rSw = 0.0;
48	<
49	<	haveRcut = 0;
50	<	haveRsw = 0;
51	<	boxIsInit = 0;
83	>	return result;
84	>	}
85
86	<	resetTime = 1e99;
86	>	SimInfo::SimInfo(ForceField* ff, Globals* simParams) :
87	>	forceField_(ff), simParams_(simParams),
88	>	ndf_(0), fdf_local(0), ndfRaw_(0), ndfTrans_(0), nZconstraint_(0),
89	>	nGlobalMols_(0), nGlobalAtoms_(0), nGlobalCutoffGroups_(0),
90	>	nGlobalIntegrableObjects_(0), nGlobalRigidBodies_(0),
91	>	nAtoms_(0), nBonds_(0),  nBends_(0), nTorsions_(0), nRigidBodies_(0),
92	>	nIntegrableObjects_(0),  nCutoffGroups_(0), nConstraints_(0),
93	>	sman_(NULL), fortranInitialized_(false), calcBoxDipole_(false) {
94
95	<	orthoRhombic = 0;
96	<	orthoTolerance = 1E-6;
97	<	useInitXSstate = true;
95	>	MoleculeStamp* molStamp;
96	>	int nMolWithSameStamp;
97	>	int nCutoffAtoms = 0; // number of atoms belong to cutoff groups
98	>	int nGroups = 0;      //total cutoff groups defined in meta-data file
99	>	CutoffGroupStamp* cgStamp;
100	>	RigidBodyStamp* rbStamp;
101	>	int nRigidAtoms = 0;
102	>	std::vector<Component*> components = simParams->getComponents();
103	>
104	>	for (std::vector<Component*>::iterator i = components.begin(); i !=components.end(); ++i) {
105	>	molStamp = (*i)->getMoleculeStamp();
106	>	nMolWithSameStamp = (*i)->getNMol();
107	>
108	>	addMoleculeStamp(molStamp, nMolWithSameStamp);
109
110	<	usePBC = 0;
111	<	useLJ = 0;
61	<	useSticky = 0;
62	<	useCharges = 0;
63	<	useDipoles = 0;
64	<	useReactionField = 0;
65	<	useGB = 0;
66	<	useEAM = 0;
67	<	useSolidThermInt = 0;
68	<	useLiquidThermInt = 0;
110	>	//calculate atoms in molecules
111	>	nGlobalAtoms_ += molStamp->getNAtoms() *nMolWithSameStamp;
112
113	<	haveCutoffGroups = false;
113	>	//calculate atoms in cutoff groups
114	>	int nAtomsInGroups = 0;
115	>	int nCutoffGroupsInStamp = molStamp->getNCutoffGroups();
116	>
117	>	for (int j=0; j < nCutoffGroupsInStamp; j++) {
118	>	cgStamp = molStamp->getCutoffGroupStamp(j);
119	>	nAtomsInGroups += cgStamp->getNMembers();
120	>	}
121
122	<	excludes = Exclude::Instance();
122	>	nGroups += nCutoffGroupsInStamp * nMolWithSameStamp;
123
124	<	myConfiguration = new SimState();
124	>	nCutoffAtoms += nAtomsInGroups * nMolWithSameStamp;
125
126	<	has_minimizer = false;
127	<	the_minimizer =NULL;
126	>	//calculate atoms in rigid bodies
127	>	int nAtomsInRigidBodies = 0;
128	>	int nRigidBodiesInStamp = molStamp->getNRigidBodies();
129	>
130	>	for (int j=0; j < nRigidBodiesInStamp; j++) {
131	>	rbStamp = molStamp->getRigidBodyStamp(j);
132	>	nAtomsInRigidBodies += rbStamp->getNMembers();
133	>	}
134
135	<	ngroup = 0;
135	>	nGlobalRigidBodies_ += nRigidBodiesInStamp * nMolWithSameStamp;
136	>	nRigidAtoms += nAtomsInRigidBodies * nMolWithSameStamp;
137	>
138	>	}
139
140	<	}
140	>	//every free atom (atom does not belong to cutoff groups) is a cutoff
141	>	//group therefore the total number of cutoff groups in the system is
142	>	//equal to the total number of atoms minus number of atoms belong to
143	>	//cutoff group defined in meta-data file plus the number of cutoff
144	>	//groups defined in meta-data file
145	>	nGlobalCutoffGroups_ = nGlobalAtoms_ - nCutoffAtoms + nGroups;
146
147	<
148	<	SimInfo::~SimInfo(){
149	<
150	<	delete myConfiguration;
151	<
152	<	map<string, GenericData*>::iterator i;
147	>	//every free atom (atom does not belong to rigid bodies) is an
148	>	//integrable object therefore the total number of integrable objects
149	>	//in the system is equal to the total number of atoms minus number of
150	>	//atoms belong to rigid body defined in meta-data file plus the number
151	>	//of rigid bodies defined in meta-data file
152	>	nGlobalIntegrableObjects_ = nGlobalAtoms_ - nRigidAtoms
153	>	+ nGlobalRigidBodies_;
154
155	<	for(i = properties.begin(); i != properties.end(); i++)
91	<	delete (*i).second;
155	>	nGlobalMols_ = molStampIds_.size();
156
157	<	}
157	>	#ifdef IS_MPI
158	>	molToProcMap_.resize(nGlobalMols_);
159	>	#endif
160
161	<	void SimInfo::setBox(double newBox[3]) {
96	<
97	<	int i, j;
98	<	double tempMat[3][3];
161	>	}
162
163	<	for(i=0; i<3; i++)
164	<	for (j=0; j<3; j++) tempMat[i][j] = 0.0;;
163	>	SimInfo::~SimInfo() {
164	>	std::map<int, Molecule*>::iterator i;
165	>	for (i = molecules_.begin(); i != molecules_.end(); ++i) {
166	>	delete i->second;
167	>	}
168	>	molecules_.clear();
169	>
170	>	delete sman_;
171	>	delete simParams_;
172	>	delete forceField_;
173	>	}
174
175	<	tempMat[0][0] = newBox[0];
176	<	tempMat[1][1] = newBox[1];
177	<	tempMat[2][2] = newBox[2];
175	>	int SimInfo::getNGlobalConstraints() {
176	>	int nGlobalConstraints;
177	>	#ifdef IS_MPI
178	>	MPI_Allreduce(&nConstraints_, &nGlobalConstraints, 1, MPI_INT, MPI_SUM,
179	>	MPI_COMM_WORLD);
180	>	#else
181	>	nGlobalConstraints =  nConstraints_;
182	>	#endif
183	>	return nGlobalConstraints;
184	>	}
185
186	<	setBoxM( tempMat );
186	>	bool SimInfo::addMolecule(Molecule* mol) {
187	>	MoleculeIterator i;
188
189	<	}
189	>	i = molecules_.find(mol->getGlobalIndex());
190	>	if (i == molecules_.end() ) {
191
192	<	void SimInfo::setBoxM( double theBox[3][3] ){
193	<
194	<	int i, j;
195	<	double FortranHmat[9]; // to preserve compatibility with Fortran the
196	<	// ordering in the array is as follows:
197	<	// [ 0 3 6 ]
198	<	// [ 1 4 7 ]
199	<	// [ 2 5 8 ]
200	<	double FortranHmatInv[9]; // the inverted Hmat (for Fortran);
201	<
202	<	if( !boxIsInit ) boxIsInit = 1;
203	<
204	<	for(i=0; i < 3; i++)
205	<	for (j=0; j < 3; j++) Hmat[i][j] = theBox[i][j];
206	<
207	<	calcBoxL();
127	<	calcHmatInv();
128	<
129	<	for(i=0; i < 3; i++) {
130	<	for (j=0; j < 3; j++) {
131	<	FortranHmat[3*j + i] = Hmat[i][j];
132	<	FortranHmatInv[3*j + i] = HmatInv[i][j];
192	>	molecules_.insert(std::make_pair(mol->getGlobalIndex(), mol));
193	>
194	>	nAtoms_ += mol->getNAtoms();
195	>	nBonds_ += mol->getNBonds();
196	>	nBends_ += mol->getNBends();
197	>	nTorsions_ += mol->getNTorsions();
198	>	nRigidBodies_ += mol->getNRigidBodies();
199	>	nIntegrableObjects_ += mol->getNIntegrableObjects();
200	>	nCutoffGroups_ += mol->getNCutoffGroups();
201	>	nConstraints_ += mol->getNConstraintPairs();
202	>
203	>	addExcludePairs(mol);
204	>
205	>	return true;
206	>	} else {
207	>	return false;
208		}
209		}
210
211	<	setFortranBox(FortranHmat, FortranHmatInv, &orthoRhombic);
212	<
213	<	}
139	<
211	>	bool SimInfo::removeMolecule(Molecule* mol) {
212	>	MoleculeIterator i;
213	>	i = molecules_.find(mol->getGlobalIndex());
214
215	<	void SimInfo::getBoxM (double theBox[3][3]) {
215	>	if (i != molecules_.end() ) {
216
217	<	int i, j;
218	<	for(i=0; i<3; i++)
219	<	for (j=0; j<3; j++) theBox[i][j] = Hmat[i][j];
220	<	}
217	>	assert(mol == i->second);
218	>
219	>	nAtoms_ -= mol->getNAtoms();
220	>	nBonds_ -= mol->getNBonds();
221	>	nBends_ -= mol->getNBends();
222	>	nTorsions_ -= mol->getNTorsions();
223	>	nRigidBodies_ -= mol->getNRigidBodies();
224	>	nIntegrableObjects_ -= mol->getNIntegrableObjects();
225	>	nCutoffGroups_ -= mol->getNCutoffGroups();
226	>	nConstraints_ -= mol->getNConstraintPairs();
227
228	+	removeExcludePairs(mol);
229	+	molecules_.erase(mol->getGlobalIndex());
230
231	<	void SimInfo::scaleBox(double scale) {
232	<	double theBox[3][3];
233	<	int i, j;
231	>	delete mol;
232	>
233	>	return true;
234	>	} else {
235	>	return false;
236	>	}
237
153	–	// cerr << "Scaling box by " << scale << "\n";
238
239	<	for(i=0; i<3; i++)
156	<	for (j=0; j<3; j++) theBox[i][j] = Hmat[i][j]*scale;
239	>	}
240
241	<	setBoxM(theBox);
241	>
242	>	Molecule* SimInfo::beginMolecule(MoleculeIterator& i) {
243	>	i = molecules_.begin();
244	>	return i == molecules_.end() ? NULL : i->second;
245	>	}
246
247	<	}
247	>	Molecule* SimInfo::nextMolecule(MoleculeIterator& i) {
248	>	++i;
249	>	return i == molecules_.end() ? NULL : i->second;
250	>	}
251
162	–	void SimInfo::calcHmatInv( void ) {
163	–
164	–	int oldOrtho;
165	–	int i,j;
166	–	double smallDiag;
167	–	double tol;
168	–	double sanity[3][3];
252
253	<	invertMat3( Hmat, HmatInv );
253	>	void SimInfo::calcNdf() {
254	>	int ndf_local;
255	>	MoleculeIterator i;
256	>	std::vector<StuntDouble*>::iterator j;
257	>	Molecule* mol;
258	>	StuntDouble* integrableObject;
259
260	<	// check to see if Hmat is orthorhombic
261	<
262	<	oldOrtho = orthoRhombic;
260	>	ndf_local = 0;
261	>
262	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
263	>	for (integrableObject = mol->beginIntegrableObject(j); integrableObject != NULL;
264	>	integrableObject = mol->nextIntegrableObject(j)) {
265
266	<	smallDiag = fabs(Hmat[0][0]);
177	<	if(smallDiag > fabs(Hmat[1][1])) smallDiag = fabs(Hmat[1][1]);
178	<	if(smallDiag > fabs(Hmat[2][2])) smallDiag = fabs(Hmat[2][2]);
179	<	tol = smallDiag * orthoTolerance;
266	>	ndf_local += 3;
267
268	<	orthoRhombic = 1;
269	<
270	<	for (i = 0; i < 3; i++ ) {
271	<	for (j = 0 ; j < 3; j++) {
272	<	if (i != j) {
273	<	if (orthoRhombic) {
274	<	if ( fabs(Hmat[i][j]) >= tol) orthoRhombic = 0;
275	<	}
268	>	if (integrableObject->isDirectional()) {
269	>	if (integrableObject->isLinear()) {
270	>	ndf_local += 2;
271	>	} else {
272	>	ndf_local += 3;
273	>	}
274	>	}
275	>
276		}
277		}
191	–	}
192	–
193	–	if( oldOrtho != orthoRhombic ){
278
279	<	if( orthoRhombic ) {
280	<	sprintf( painCave.errMsg,
197	<	"OOPSE is switching from the default Non-Orthorhombic\n"
198	<	"\tto the faster Orthorhombic periodic boundary computations.\n"
199	<	"\tThis is usually a good thing, but if you wan't the\n"
200	<	"\tNon-Orthorhombic computations, make the orthoBoxTolerance\n"
201	<	"\tvariable ( currently set to %G ) smaller.\n",
202	<	orthoTolerance);
203	<	painCave.severity = OOPSE_INFO;
204	<	simError();
205	<	}
206	<	else {
207	<	sprintf( painCave.errMsg,
208	<	"OOPSE is switching from the faster Orthorhombic to the more\n"
209	<	"\tflexible Non-Orthorhombic periodic boundary computations.\n"
210	<	"\tThis is usually because the box has deformed under\n"
211	<	"\tNPTf integration. If you wan't to live on the edge with\n"
212	<	"\tthe Orthorhombic computations, make the orthoBoxTolerance\n"
213	<	"\tvariable ( currently set to %G ) larger.\n",
214	<	orthoTolerance);
215	<	painCave.severity = OOPSE_WARNING;
216	<	simError();
217	<	}
218	<	}
219	<	}
279	>	// n_constraints is local, so subtract them on each processor
280	>	ndf_local -= nConstraints_;
281
282	<	void SimInfo::calcBoxL( void ){
282	>	#ifdef IS_MPI
283	>	MPI_Allreduce(&ndf_local,&ndf_,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
284	>	#else
285	>	ndf_ = ndf_local;
286	>	#endif
287
288	<	double dx, dy, dz, dsq;
288	>	// nZconstraints_ is global, as are the 3 COM translations for the
289	>	// entire system:
290	>	ndf_ = ndf_ - 3 - nZconstraint_;
291
292	<	// boxVol = Determinant of Hmat
292	>	}
293
294	<	boxVol = matDet3( Hmat );
294	>	int SimInfo::getFdf() {
295	>	#ifdef IS_MPI
296	>	MPI_Allreduce(&fdf_local,&fdf_,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
297	>	#else
298	>	fdf_ = fdf_local;
299	>	#endif
300	>	return fdf_;
301	>	}
302	>
303	>	void SimInfo::calcNdfRaw() {
304	>	int ndfRaw_local;
305
306	<	// boxLx
307	<
308	<	dx = Hmat[0][0]; dy = Hmat[1][0]; dz = Hmat[2][0];
309	<	dsq = dx*dx + dy*dy + dz*dz;
233	<	boxL[0] = sqrt( dsq );
234	<	//maxCutoff = 0.5 * boxL[0];
306	>	MoleculeIterator i;
307	>	std::vector<StuntDouble*>::iterator j;
308	>	Molecule* mol;
309	>	StuntDouble* integrableObject;
310
311	<	// boxLy
312	<
238	<	dx = Hmat[0][1]; dy = Hmat[1][1]; dz = Hmat[2][1];
239	<	dsq = dx*dx + dy*dy + dz*dz;
240	<	boxL[1] = sqrt( dsq );
241	<	//if( (0.5 * boxL[1]) < maxCutoff ) maxCutoff = 0.5 * boxL[1];
242	<
243	<
244	<	// boxLz
245	<
246	<	dx = Hmat[0][2]; dy = Hmat[1][2]; dz = Hmat[2][2];
247	<	dsq = dx*dx + dy*dy + dz*dz;
248	<	boxL[2] = sqrt( dsq );
249	<	//if( (0.5 * boxL[2]) < maxCutoff ) maxCutoff = 0.5 * boxL[2];
250	<
251	<	//calculate the max cutoff
252	<	maxCutoff =  calcMaxCutOff();
253	<
254	<	checkCutOffs();
255	<
256	<	}
257	<
258	<
259	<	double SimInfo::calcMaxCutOff(){
260	<
261	<	double ri[3], rj[3], rk[3];
262	<	double rij[3], rjk[3], rki[3];
263	<	double minDist;
264	<
265	<	ri[0] = Hmat[0][0];
266	<	ri[1] = Hmat[1][0];
267	<	ri[2] = Hmat[2][0];
268	<
269	<	rj[0] = Hmat[0][1];
270	<	rj[1] = Hmat[1][1];
271	<	rj[2] = Hmat[2][1];
272	<
273	<	rk[0] = Hmat[0][2];
274	<	rk[1] = Hmat[1][2];
275	<	rk[2] = Hmat[2][2];
311	>	// Raw degrees of freedom that we have to set
312	>	ndfRaw_local = 0;
313
314	<	crossProduct3(ri, rj, rij);
315	<	distXY = dotProduct3(rk,rij) / norm3(rij);
314	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
315	>	for (integrableObject = mol->beginIntegrableObject(j); integrableObject != NULL;
316	>	integrableObject = mol->nextIntegrableObject(j)) {
317
318	<	crossProduct3(rj,rk, rjk);
281	<	distYZ = dotProduct3(ri,rjk) / norm3(rjk);
282	<
283	<	crossProduct3(rk,ri, rki);
284	<	distZX = dotProduct3(rj,rki) / norm3(rki);
285	<
286	<	minDist = min(min(distXY, distYZ), distZX);
287	<	return minDist/2;
288	<
289	<	}
290	<
291	<	void SimInfo::wrapVector( double thePos[3] ){
292	<
293	<	int i;
294	<	double scaled[3];
318	>	ndfRaw_local += 3;
319
320	<	if( !orthoRhombic ){
321	<	// calc the scaled coordinates.
322	<
323	<
324	<	matVecMul3(HmatInv, thePos, scaled);
320	>	if (integrableObject->isDirectional()) {
321	>	if (integrableObject->isLinear()) {
322	>	ndfRaw_local += 2;
323	>	} else {
324	>	ndfRaw_local += 3;
325	>	}
326	>	}
327	>
328	>	}
329	>	}
330
331	<	for(i=0; i<3; i++)
332	<	scaled[i] -= roundMe(scaled[i]);
333	<
334	<	// calc the wrapped real coordinates from the wrapped scaled coordinates
335	<
307	<	matVecMul3(Hmat, scaled, thePos);
308	<
331	>	#ifdef IS_MPI
332	>	MPI_Allreduce(&ndfRaw_local,&ndfRaw_,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
333	>	#else
334	>	ndfRaw_ = ndfRaw_local;
335	>	#endif
336		}
310	–	else{
311	–	// calc the scaled coordinates.
312	–
313	–	for(i=0; i<3; i++)
314	–	scaled[i] = thePos[i]*HmatInv[i][i];
315	–
316	–	// wrap the scaled coordinates
317	–
318	–	for(i=0; i<3; i++)
319	–	scaled[i] -= roundMe(scaled[i]);
320	–
321	–	// calc the wrapped real coordinates from the wrapped scaled coordinates
322	–
323	–	for(i=0; i<3; i++)
324	–	thePos[i] = scaled[i]*Hmat[i][i];
325	–	}
326	–
327	–	}
337
338	+	void SimInfo::calcNdfTrans() {
339	+	int ndfTrans_local;
340
341	<	int SimInfo::getNDF(){
331	<	int ndf_local;
341	>	ndfTrans_local = 3 * nIntegrableObjects_ - nConstraints_;
342
333	–	ndf_local = 0;
334	–
335	–	for(int i = 0; i < integrableObjects.size(); i++){
336	–	ndf_local += 3;
337	–	if (integrableObjects[i]->isDirectional()) {
338	–	if (integrableObjects[i]->isLinear())
339	–	ndf_local += 2;
340	–	else
341	–	ndf_local += 3;
342	–	}
343	–	}
343
345	–	// n_constraints is local, so subtract them on each processor:
346	–
347	–	ndf_local -= n_constraints;
348	–
344		#ifdef IS_MPI
345	<	MPI_Allreduce(&ndf_local,&ndf,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
345	>	MPI_Allreduce(&ndfTrans_local,&ndfTrans_,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
346		#else
347	<	ndf = ndf_local;
347	>	ndfTrans_ = ndfTrans_local;
348		#endif
349
350	<	// nZconstraints is global, as are the 3 COM translations for the
351	<	// entire system:
350	>	ndfTrans_ = ndfTrans_ - 3 - nZconstraint_;
351	>
352	>	}
353
354	<	ndf = ndf - 3 - nZconstraints;
354	>	void SimInfo::addExcludePairs(Molecule* mol) {
355	>	std::vector<Bond*>::iterator bondIter;
356	>	std::vector<Bend*>::iterator bendIter;
357	>	std::vector<Torsion*>::iterator torsionIter;
358	>	Bond* bond;
359	>	Bend* bend;
360	>	Torsion* torsion;
361	>	int a;
362	>	int b;
363	>	int c;
364	>	int d;
365
366	<	return ndf;
361	<	}
366	>	std::map<int, std::set<int> > atomGroups;
367
368	<	int SimInfo::getNDFraw() {
369	<	int ndfRaw_local;
368	>	Molecule::RigidBodyIterator rbIter;
369	>	RigidBody* rb;
370	>	Molecule::IntegrableObjectIterator ii;
371	>	StuntDouble* integrableObject;
372	>
373	>	for (integrableObject = mol->beginIntegrableObject(ii); integrableObject != NULL;
374	>	integrableObject = mol->nextIntegrableObject(ii)) {
375
376	<	// Raw degrees of freedom that we have to set
377	<	ndfRaw_local = 0;
376	>	if (integrableObject->isRigidBody()) {
377	>	rb = static_cast<RigidBody*>(integrableObject);
378	>	std::vector<Atom*> atoms = rb->getAtoms();
379	>	std::set<int> rigidAtoms;
380	>	for (int i = 0; i < atoms.size(); ++i) {
381	>	rigidAtoms.insert(atoms[i]->getGlobalIndex());
382	>	}
383	>	for (int i = 0; i < atoms.size(); ++i) {
384	>	atomGroups.insert(std::map<int, std::set<int> >::value_type(atoms[i]->getGlobalIndex(), rigidAtoms));
385	>	}
386	>	} else {
387	>	std::set<int> oneAtomSet;
388	>	oneAtomSet.insert(integrableObject->getGlobalIndex());
389	>	atomGroups.insert(std::map<int, std::set<int> >::value_type(integrableObject->getGlobalIndex(), oneAtomSet));
390	>	}
391	>	}
392
369	–	for(int i = 0; i < integrableObjects.size(); i++){
370	–	ndfRaw_local += 3;
371	–	if (integrableObjects[i]->isDirectional()) {
372	–	if (integrableObjects[i]->isLinear())
373	–	ndfRaw_local += 2;
374	–	else
375	–	ndfRaw_local += 3;
376	–	}
377	–	}
393
394	<	#ifdef IS_MPI
395	<	MPI_Allreduce(&ndfRaw_local,&ndfRaw,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
396	<	#else
397	<	ndfRaw = ndfRaw_local;
398	<	#endif
394	>
395	>	for (bond= mol->beginBond(bondIter); bond != NULL; bond = mol->nextBond(bondIter)) {
396	>	a = bond->getAtomA()->getGlobalIndex();
397	>	b = bond->getAtomB()->getGlobalIndex();
398	>	exclude_.addPair(a, b);
399	>	}
400
401	<	return ndfRaw;
402	<	}
401	>	for (bend= mol->beginBend(bendIter); bend != NULL; bend = mol->nextBend(bendIter)) {
402	>	a = bend->getAtomA()->getGlobalIndex();
403	>	b = bend->getAtomB()->getGlobalIndex();
404	>	c = bend->getAtomC()->getGlobalIndex();
405	>	std::set<int> rigidSetA = getRigidSet(a, atomGroups);
406	>	std::set<int> rigidSetB = getRigidSet(b, atomGroups);
407	>	std::set<int> rigidSetC = getRigidSet(c, atomGroups);
408
409	<	int SimInfo::getNDFtranslational() {
410	<	int ndfTrans_local;
409	>	exclude_.addPairs(rigidSetA, rigidSetB);
410	>	exclude_.addPairs(rigidSetA, rigidSetC);
411	>	exclude_.addPairs(rigidSetB, rigidSetC);
412	>
413	>	//exclude_.addPair(a, b);
414	>	//exclude_.addPair(a, c);
415	>	//exclude_.addPair(b, c);
416	>	}
417
418	<	ndfTrans_local = 3 * integrableObjects.size() - n_constraints;
418	>	for (torsion= mol->beginTorsion(torsionIter); torsion != NULL; torsion = mol->nextTorsion(torsionIter)) {
419	>	a = torsion->getAtomA()->getGlobalIndex();
420	>	b = torsion->getAtomB()->getGlobalIndex();
421	>	c = torsion->getAtomC()->getGlobalIndex();
422	>	d = torsion->getAtomD()->getGlobalIndex();
423	>	std::set<int> rigidSetA = getRigidSet(a, atomGroups);
424	>	std::set<int> rigidSetB = getRigidSet(b, atomGroups);
425	>	std::set<int> rigidSetC = getRigidSet(c, atomGroups);
426	>	std::set<int> rigidSetD = getRigidSet(d, atomGroups);
427
428	+	exclude_.addPairs(rigidSetA, rigidSetB);
429	+	exclude_.addPairs(rigidSetA, rigidSetC);
430	+	exclude_.addPairs(rigidSetA, rigidSetD);
431	+	exclude_.addPairs(rigidSetB, rigidSetC);
432	+	exclude_.addPairs(rigidSetB, rigidSetD);
433	+	exclude_.addPairs(rigidSetC, rigidSetD);
434
435	<	#ifdef IS_MPI
436	<	MPI_Allreduce(&ndfTrans_local,&ndfTrans,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
437	<	#else
438	<	ndfTrans = ndfTrans_local;
439	<	#endif
435	>	/*
436	>	exclude_.addPairs(rigidSetA.begin(), rigidSetA.end(), rigidSetB.begin(), rigidSetB.end());
437	>	exclude_.addPairs(rigidSetA.begin(), rigidSetA.end(), rigidSetC.begin(), rigidSetC.end());
438	>	exclude_.addPairs(rigidSetA.begin(), rigidSetA.end(), rigidSetD.begin(), rigidSetD.end());
439	>	exclude_.addPairs(rigidSetB.begin(), rigidSetB.end(), rigidSetC.begin(), rigidSetC.end());
440	>	exclude_.addPairs(rigidSetB.begin(), rigidSetB.end(), rigidSetD.begin(), rigidSetD.end());
441	>	exclude_.addPairs(rigidSetC.begin(), rigidSetC.end(), rigidSetD.begin(), rigidSetD.end());
442	>
443	>
444	>	exclude_.addPair(a, b);
445	>	exclude_.addPair(a, c);
446	>	exclude_.addPair(a, d);
447	>	exclude_.addPair(b, c);
448	>	exclude_.addPair(b, d);
449	>	exclude_.addPair(c, d);
450	>	*/
451	>	}
452
453	<	ndfTrans = ndfTrans - 3 - nZconstraints;
453	>	for (rb = mol->beginRigidBody(rbIter); rb != NULL; rb = mol->nextRigidBody(rbIter)) {
454	>	std::vector<Atom*> atoms = rb->getAtoms();
455	>	for (int i = 0; i < atoms.size() -1 ; ++i) {
456	>	for (int j = i + 1; j < atoms.size(); ++j) {
457	>	a = atoms[i]->getGlobalIndex();
458	>	b = atoms[j]->getGlobalIndex();
459	>	exclude_.addPair(a, b);
460	>	}
461	>	}
462	>	}
463
464	<	return ndfTrans;
403	<	}
464	>	}
465
466	<	int SimInfo::getTotIntegrableObjects() {
467	<	int nObjs_local;
468	<	int nObjs;
466	>	void SimInfo::removeExcludePairs(Molecule* mol) {
467	>	std::vector<Bond*>::iterator bondIter;
468	>	std::vector<Bend*>::iterator bendIter;
469	>	std::vector<Torsion*>::iterator torsionIter;
470	>	Bond* bond;
471	>	Bend* bend;
472	>	Torsion* torsion;
473	>	int a;
474	>	int b;
475	>	int c;
476	>	int d;
477
478	<	nObjs_local =  integrableObjects.size();
478	>	std::map<int, std::set<int> > atomGroups;
479	>
480	>	Molecule::RigidBodyIterator rbIter;
481	>	RigidBody* rb;
482	>	Molecule::IntegrableObjectIterator ii;
483	>	StuntDouble* integrableObject;
484	>
485	>	for (integrableObject = mol->beginIntegrableObject(ii); integrableObject != NULL;
486	>	integrableObject = mol->nextIntegrableObject(ii)) {
487	>
488	>	if (integrableObject->isRigidBody()) {
489	>	rb = static_cast<RigidBody*>(integrableObject);
490	>	std::vector<Atom*> atoms = rb->getAtoms();
491	>	std::set<int> rigidAtoms;
492	>	for (int i = 0; i < atoms.size(); ++i) {
493	>	rigidAtoms.insert(atoms[i]->getGlobalIndex());
494	>	}
495	>	for (int i = 0; i < atoms.size(); ++i) {
496	>	atomGroups.insert(std::map<int, std::set<int> >::value_type(atoms[i]->getGlobalIndex(), rigidAtoms));
497	>	}
498	>	} else {
499	>	std::set<int> oneAtomSet;
500	>	oneAtomSet.insert(integrableObject->getGlobalIndex());
501	>	atomGroups.insert(std::map<int, std::set<int> >::value_type(integrableObject->getGlobalIndex(), oneAtomSet));
502	>	}
503	>	}
504
505	+
506	+	for (bond= mol->beginBond(bondIter); bond != NULL; bond = mol->nextBond(bondIter)) {
507	+	a = bond->getAtomA()->getGlobalIndex();
508	+	b = bond->getAtomB()->getGlobalIndex();
509	+	exclude_.removePair(a, b);
510	+	}
511
512	<	#ifdef IS_MPI
513	<	MPI_Allreduce(&nObjs_local,&nObjs,1,MPI_INT,MPI_SUM, MPI_COMM_WORLD);
514	<	#else
515	<	nObjs = nObjs_local;
416	<	#endif
512	>	for (bend= mol->beginBend(bendIter); bend != NULL; bend = mol->nextBend(bendIter)) {
513	>	a = bend->getAtomA()->getGlobalIndex();
514	>	b = bend->getAtomB()->getGlobalIndex();
515	>	c = bend->getAtomC()->getGlobalIndex();
516
517	+	std::set<int> rigidSetA = getRigidSet(a, atomGroups);
518	+	std::set<int> rigidSetB = getRigidSet(b, atomGroups);
519	+	std::set<int> rigidSetC = getRigidSet(c, atomGroups);
520
521	<	return nObjs;
522	<	}
521	>	exclude_.removePairs(rigidSetA, rigidSetB);
522	>	exclude_.removePairs(rigidSetA, rigidSetC);
523	>	exclude_.removePairs(rigidSetB, rigidSetC);
524	>
525	>	//exclude_.removePair(a, b);
526	>	//exclude_.removePair(a, c);
527	>	//exclude_.removePair(b, c);
528	>	}
529
530	<	void SimInfo::refreshSim(){
530	>	for (torsion= mol->beginTorsion(torsionIter); torsion != NULL; torsion = mol->nextTorsion(torsionIter)) {
531	>	a = torsion->getAtomA()->getGlobalIndex();
532	>	b = torsion->getAtomB()->getGlobalIndex();
533	>	c = torsion->getAtomC()->getGlobalIndex();
534	>	d = torsion->getAtomD()->getGlobalIndex();
535
536	<	simtype fInfo;
537	<	int isError;
538	<	int n_global;
539	<	int* excl;
536	>	std::set<int> rigidSetA = getRigidSet(a, atomGroups);
537	>	std::set<int> rigidSetB = getRigidSet(b, atomGroups);
538	>	std::set<int> rigidSetC = getRigidSet(c, atomGroups);
539	>	std::set<int> rigidSetD = getRigidSet(d, atomGroups);
540
541	<	fInfo.dielect = 0.0;
541	>	exclude_.removePairs(rigidSetA, rigidSetB);
542	>	exclude_.removePairs(rigidSetA, rigidSetC);
543	>	exclude_.removePairs(rigidSetA, rigidSetD);
544	>	exclude_.removePairs(rigidSetB, rigidSetC);
545	>	exclude_.removePairs(rigidSetB, rigidSetD);
546	>	exclude_.removePairs(rigidSetC, rigidSetD);
547
548	<	if( useDipoles ){
549	<	if( useReactionField )fInfo.dielect = dielectric;
548	>	/*
549	>	exclude_.removePairs(rigidSetA.begin(), rigidSetA.end(), rigidSetB.begin(), rigidSetB.end());
550	>	exclude_.removePairs(rigidSetA.begin(), rigidSetA.end(), rigidSetC.begin(), rigidSetC.end());
551	>	exclude_.removePairs(rigidSetA.begin(), rigidSetA.end(), rigidSetD.begin(), rigidSetD.end());
552	>	exclude_.removePairs(rigidSetB.begin(), rigidSetB.end(), rigidSetC.begin(), rigidSetC.end());
553	>	exclude_.removePairs(rigidSetB.begin(), rigidSetB.end(), rigidSetD.begin(), rigidSetD.end());
554	>	exclude_.removePairs(rigidSetC.begin(), rigidSetC.end(), rigidSetD.begin(), rigidSetD.end());
555	>
556	>
557	>	exclude_.removePair(a, b);
558	>	exclude_.removePair(a, c);
559	>	exclude_.removePair(a, d);
560	>	exclude_.removePair(b, c);
561	>	exclude_.removePair(b, d);
562	>	exclude_.removePair(c, d);
563	>	*/
564	>	}
565	>
566	>	for (rb = mol->beginRigidBody(rbIter); rb != NULL; rb = mol->nextRigidBody(rbIter)) {
567	>	std::vector<Atom*> atoms = rb->getAtoms();
568	>	for (int i = 0; i < atoms.size() -1 ; ++i) {
569	>	for (int j = i + 1; j < atoms.size(); ++j) {
570	>	a = atoms[i]->getGlobalIndex();
571	>	b = atoms[j]->getGlobalIndex();
572	>	exclude_.removePair(a, b);
573	>	}
574	>	}
575	>	}
576	>
577		}
578
435	–	fInfo.SIM_uses_PBC = usePBC;
436	–	//fInfo.SIM_uses_LJ = 0;
437	–	fInfo.SIM_uses_LJ = useLJ;
438	–	fInfo.SIM_uses_sticky = useSticky;
439	–	//fInfo.SIM_uses_sticky = 0;
440	–	fInfo.SIM_uses_charges = useCharges;
441	–	fInfo.SIM_uses_dipoles = useDipoles;
442	–	//fInfo.SIM_uses_dipoles = 0;
443	–	fInfo.SIM_uses_RF = useReactionField;
444	–	//fInfo.SIM_uses_RF = 0;
445	–	fInfo.SIM_uses_GB = useGB;
446	–	fInfo.SIM_uses_EAM = useEAM;
579
580	<	n_exclude = excludes->getSize();
581	<	excl = excludes->getFortranArray();
582	<
580	>	void SimInfo::addMoleculeStamp(MoleculeStamp* molStamp, int nmol) {
581	>	int curStampId;
582	>
583	>	//index from 0
584	>	curStampId = moleculeStamps_.size();
585	>
586	>	moleculeStamps_.push_back(molStamp);
587	>	molStampIds_.insert(molStampIds_.end(), nmol, curStampId);
588	>	}
589	>
590	>	void SimInfo::update() {
591	>
592	>	setupSimType();
593	>
594		#ifdef IS_MPI
595	<	n_global = mpiSim->getNAtomsGlobal();
453	<	#else
454	<	n_global = n_atoms;
595	>	setupFortranParallel();
596		#endif
456	–
457	–	isError = 0;
458	–
459	–	getFortranGroupArrays(this, FglobalGroupMembership, mfact);
460	–	//it may not be a good idea to pass the address of first element in vector
461	–	//since c++ standard does not require vector to be stored continuously in meomory
462	–	//Most of the compilers will organize the memory of vector continuously
463	–	setFortranSim( &fInfo, &n_global, &n_atoms, identArray, &n_exclude, excl,
464	–	&nGlobalExcludes, globalExcludes, molMembershipArray,
465	–	&mfact[0], &ngroup, &FglobalGroupMembership[0], &isError);
597
598	<	if( isError ){
598	>	setupFortranSim();
599	>
600	>	//setup fortran force field
601	>	/** @deprecate */
602	>	int isError = 0;
603
604	<	sprintf( painCave.errMsg,
605	<	"There was an error setting the simulation information in fortran.\n" );
606	<	painCave.isFatal = 1;
472	<	painCave.severity = OOPSE_ERROR;
473	<	simError();
474	<	}
475	<
476	<	#ifdef IS_MPI
477	<	sprintf( checkPointMsg,
478	<	"succesfully sent the simulation information to fortran.\n");
479	<	MPIcheckPoint();
480	<	#endif // is_mpi
481	<
482	<	this->ndf = this->getNDF();
483	<	this->ndfRaw = this->getNDFraw();
484	<	this->ndfTrans = this->getNDFtranslational();
485	<	}
604	>	setupElectrostaticSummationMethod( isError );
605	>	setupSwitchingFunction();
606	>	setupAccumulateBoxDipole();
607
608	<	void SimInfo::setDefaultRcut( double theRcut ){
608	>	if(isError){
609	>	sprintf( painCave.errMsg,
610	>	"ForceField error: There was an error initializing the forceField in fortran.\n" );
611	>	painCave.isFatal = 1;
612	>	simError();
613	>	}
614
615	<	haveRcut = 1;
616	<	rCut = theRcut;
491	<	rList = rCut + 1.0;
492	<
493	<	notifyFortranCutoffs( &rCut, &rSw, &rList );
494	<	}
615	>
616	>	setupCutoff();
617
618	<	void SimInfo::setDefaultRcut( double theRcut, double theRsw ){
618	>	calcNdf();
619	>	calcNdfRaw();
620	>	calcNdfTrans();
621
622	<	rSw = theRsw;
623	<	setDefaultRcut( theRcut );
500	<	}
622	>	fortranInitialized_ = true;
623	>	}
624
625	+	std::set<AtomType*> SimInfo::getUniqueAtomTypes() {
626	+	SimInfo::MoleculeIterator mi;
627	+	Molecule* mol;
628	+	Molecule::AtomIterator ai;
629	+	Atom* atom;
630	+	std::set<AtomType*> atomTypes;
631
632	<	void SimInfo::checkCutOffs( void ){
633	<
634	<	if( boxIsInit ){
635	<
636	<	//we need to check cutOffs against the box
637	<
638	<	if( rCut > maxCutoff ){
639	<	sprintf( painCave.errMsg,
640	<	"cutoffRadius is too large for the current periodic box.\n"
512	<	"\tCurrent Value of cutoffRadius = %G at time %G\n "
513	<	"\tThis is larger than half of at least one of the\n"
514	<	"\tperiodic box vectors.  Right now, the Box matrix is:\n"
515	<	"\n"
516	<	"\t[ %G %G %G ]\n"
517	<	"\t[ %G %G %G ]\n"
518	<	"\t[ %G %G %G ]\n",
519	<	rCut, currentTime,
520	<	Hmat[0][0], Hmat[0][1], Hmat[0][2],
521	<	Hmat[1][0], Hmat[1][1], Hmat[1][2],
522	<	Hmat[2][0], Hmat[2][1], Hmat[2][2]);
523	<	painCave.severity = OOPSE_ERROR;
524	<	painCave.isFatal = 1;
525	<	simError();
526	<	}
527	<	} else {
528	<	// initialize this stuff before using it, OK?
529	<	sprintf( painCave.errMsg,
530	<	"Trying to check cutoffs without a box.\n"
531	<	"\tOOPSE should have better programmers than that.\n" );
532	<	painCave.severity = OOPSE_ERROR;
533	<	painCave.isFatal = 1;
534	<	simError();
632	>	for(mol = beginMolecule(mi); mol != NULL; mol = nextMolecule(mi)) {
633	>
634	>	for(atom = mol->beginAtom(ai); atom != NULL; atom = mol->nextAtom(ai)) {
635	>	atomTypes.insert(atom->getAtomType());
636	>	}
637	>
638	>	}
639	>
640	>	return atomTypes;
641		}
536	–
537	–	}
642
643	<	void SimInfo::addProperty(GenericData* prop){
643	>	void SimInfo::setupSimType() {
644	>	std::set<AtomType*>::iterator i;
645	>	std::set<AtomType*> atomTypes;
646	>	atomTypes = getUniqueAtomTypes();
647	>
648	>	int useLennardJones = 0;
649	>	int useElectrostatic = 0;
650	>	int useEAM = 0;
651	>	int useSC = 0;
652	>	int useCharge = 0;
653	>	int useDirectional = 0;
654	>	int useDipole = 0;
655	>	int useGayBerne = 0;
656	>	int useSticky = 0;
657	>	int useStickyPower = 0;
658	>	int useShape = 0;
659	>	int useFLARB = 0; //it is not in AtomType yet
660	>	int useDirectionalAtom = 0;
661	>	int useElectrostatics = 0;
662	>	//usePBC and useRF are from simParams
663	>	int usePBC = simParams_->getUsePeriodicBoundaryConditions();
664	>	int useRF;
665	>	int useSF;
666	>	int useSP;
667	>	int useBoxDipole;
668	>	std::string myMethod;
669
670	<	map<string, GenericData*>::iterator result;
671	<	result = properties.find(prop->getID());
672	<
673	<	//we can't simply use  properties[prop->getID()] = prop,
674	<	//it will cause memory leak if we already contain a propery which has the same name of prop
675	<
676	<	if(result != properties.end()){
670	>	// set the useRF logical
671	>	useRF = 0;
672	>	useSF = 0;
673	>
674	>
675	>	if (simParams_->haveElectrostaticSummationMethod()) {
676	>	std::string myMethod = simParams_->getElectrostaticSummationMethod();
677	>	toUpper(myMethod);
678	>	if (myMethod == "REACTION_FIELD"){
679	>	useRF=1;
680	>	} else if (myMethod == "SHIFTED_FORCE"){
681	>	useSF = 1;
682	>	} else if (myMethod == "SHIFTED_POTENTIAL"){
683	>	useSP = 1;
684	>	}
685	>	}
686
687	<	delete (*result).second;
688	<	(*result).second = prop;
687	>	if (simParams_->haveAccumulateBoxDipole())
688	>	if (simParams_->getAccumulateBoxDipole())
689	>	useBoxDipole = 1;
690	>
691	>	//loop over all of the atom types
692	>	for (i = atomTypes.begin(); i != atomTypes.end(); ++i) {
693	>	useLennardJones |= (*i)->isLennardJones();
694	>	useElectrostatic |= (*i)->isElectrostatic();
695	>	useEAM |= (*i)->isEAM();
696	>	useSC |= (*i)->isSC();
697	>	useCharge |= (*i)->isCharge();
698	>	useDirectional |= (*i)->isDirectional();
699	>	useDipole |= (*i)->isDipole();
700	>	useGayBerne |= (*i)->isGayBerne();
701	>	useSticky |= (*i)->isSticky();
702	>	useStickyPower |= (*i)->isStickyPower();
703	>	useShape |= (*i)->isShape();
704	>	}
705	>
706	>	if (useSticky || useStickyPower || useDipole || useGayBerne || useShape) {
707	>	useDirectionalAtom = 1;
708	>	}
709	>
710	>	if (useCharge || useDipole) {
711	>	useElectrostatics = 1;
712	>	}
713	>
714	>	#ifdef IS_MPI
715	>	int temp;
716	>
717	>	temp = usePBC;
718	>	MPI_Allreduce(&temp, &usePBC, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
719	>
720	>	temp = useDirectionalAtom;
721	>	MPI_Allreduce(&temp, &useDirectionalAtom, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
722	>
723	>	temp = useLennardJones;
724	>	MPI_Allreduce(&temp, &useLennardJones, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
725	>
726	>	temp = useElectrostatics;
727	>	MPI_Allreduce(&temp, &useElectrostatics, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
728	>
729	>	temp = useCharge;
730	>	MPI_Allreduce(&temp, &useCharge, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
731	>
732	>	temp = useDipole;
733	>	MPI_Allreduce(&temp, &useDipole, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
734	>
735	>	temp = useSticky;
736	>	MPI_Allreduce(&temp, &useSticky, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
737	>
738	>	temp = useStickyPower;
739	>	MPI_Allreduce(&temp, &useStickyPower, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
740	>
741	>	temp = useGayBerne;
742	>	MPI_Allreduce(&temp, &useGayBerne, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
743	>
744	>	temp = useEAM;
745	>	MPI_Allreduce(&temp, &useEAM, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
746	>
747	>	temp = useSC;
748	>	MPI_Allreduce(&temp, &useSC, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
749	>
750	>	temp = useShape;
751	>	MPI_Allreduce(&temp, &useShape, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
752	>
753	>	temp = useFLARB;
754	>	MPI_Allreduce(&temp, &useFLARB, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
755	>
756	>	temp = useRF;
757	>	MPI_Allreduce(&temp, &useRF, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
758	>
759	>	temp = useSF;
760	>	MPI_Allreduce(&temp, &useSF, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
761	>
762	>	temp = useSP;
763	>	MPI_Allreduce(&temp, &useSP, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
764	>
765	>	temp = useBoxDipole;
766	>	MPI_Allreduce(&temp, &useBoxDipole, 1, MPI_INT, MPI_LOR, MPI_COMM_WORLD);
767	>
768	>	#endif
769	>
770	>	fInfo_.SIM_uses_PBC = usePBC;
771	>	fInfo_.SIM_uses_DirectionalAtoms = useDirectionalAtom;
772	>	fInfo_.SIM_uses_LennardJones = useLennardJones;
773	>	fInfo_.SIM_uses_Electrostatics = useElectrostatics;
774	>	fInfo_.SIM_uses_Charges = useCharge;
775	>	fInfo_.SIM_uses_Dipoles = useDipole;
776	>	fInfo_.SIM_uses_Sticky = useSticky;
777	>	fInfo_.SIM_uses_StickyPower = useStickyPower;
778	>	fInfo_.SIM_uses_GayBerne = useGayBerne;
779	>	fInfo_.SIM_uses_EAM = useEAM;
780	>	fInfo_.SIM_uses_SC = useSC;
781	>	fInfo_.SIM_uses_Shapes = useShape;
782	>	fInfo_.SIM_uses_FLARB = useFLARB;
783	>	fInfo_.SIM_uses_RF = useRF;
784	>	fInfo_.SIM_uses_SF = useSF;
785	>	fInfo_.SIM_uses_SP = useSP;
786	>	fInfo_.SIM_uses_BoxDipole = useBoxDipole;
787	>
788	>	if( myMethod == "REACTION_FIELD") {
789
790	+	if (simParams_->haveDielectric()) {
791	+	fInfo_.dielect = simParams_->getDielectric();
792	+	} else {
793	+	sprintf(painCave.errMsg,
794	+	"SimSetup Error: No Dielectric constant was set.\n"
795	+	"\tYou are trying to use Reaction Field without"
796	+	"\tsetting a dielectric constant!\n");
797	+	painCave.isFatal = 1;
798	+	simError();
799	+	}
800	+	}
801	+
802		}
553	–	else{
803
804	<	properties[prop->getID()] = prop;
804	>	void SimInfo::setupFortranSim() {
805	>	int isError;
806	>	int nExclude;
807	>	std::vector<int> fortranGlobalGroupMembership;
808	>
809	>	nExclude = exclude_.getSize();
810	>	isError = 0;
811
812	<	}
812	>	//globalGroupMembership_ is filled by SimCreator
813	>	for (int i = 0; i < nGlobalAtoms_; i++) {
814	>	fortranGlobalGroupMembership.push_back(globalGroupMembership_[i] + 1);
815	>	}
816	>
817	>	//calculate mass ratio of cutoff group
818	>	std::vector<RealType> mfact;
819	>	SimInfo::MoleculeIterator mi;
820	>	Molecule* mol;
821	>	Molecule::CutoffGroupIterator ci;
822	>	CutoffGroup* cg;
823	>	Molecule::AtomIterator ai;
824	>	Atom* atom;
825	>	RealType totalMass;
826	>
827	>	//to avoid memory reallocation, reserve enough space for mfact
828	>	mfact.reserve(getNCutoffGroups());
829
830	<	}
830	>	for(mol = beginMolecule(mi); mol != NULL; mol = nextMolecule(mi)) {
831	>	for (cg = mol->beginCutoffGroup(ci); cg != NULL; cg = mol->nextCutoffGroup(ci)) {
832
833	<	GenericData* SimInfo::getProperty(const string& propName){
834	<
835	<	map<string, GenericData*>::iterator result;
836	<
837	<	//string lowerCaseName = ();
838	<
839	<	result = properties.find(propName);
840	<
569	<	if(result != properties.end())
570	<	return (*result).second;
571	<	else
572	<	return NULL;
573	<	}
833	>	totalMass = cg->getMass();
834	>	for(atom = cg->beginAtom(ai); atom != NULL; atom = cg->nextAtom(ai)) {
835	>	// Check for massless groups - set mfact to 1 if true
836	>	if (totalMass != 0)
837	>	mfact.push_back(atom->getMass()/totalMass);
838	>	else
839	>	mfact.push_back( 1.0 );
840	>	}
841
842	+	}
843	+	}
844
845	<	void SimInfo::getFortranGroupArrays(SimInfo* info,
846	<	vector<int>& FglobalGroupMembership,
578	<	vector<double>& mfact){
579	<
580	<	Molecule* myMols;
581	<	Atom** myAtoms;
582	<	int numAtom;
583	<	double mtot;
584	<	int numMol;
585	<	int numCutoffGroups;
586	<	CutoffGroup* myCutoffGroup;
587	<	vector<CutoffGroup*>::iterator iterCutoff;
588	<	Atom* cutoffAtom;
589	<	vector<Atom*>::iterator iterAtom;
590	<	int atomIndex;
591	<	double totalMass;
592	<
593	<	mfact.clear();
594	<	FglobalGroupMembership.clear();
595	<
845	>	//fill ident array of local atoms (it is actually ident of AtomType, it is so confusing !!!)
846	>	std::vector<int> identArray;
847
848	<	// Fix the silly fortran indexing problem
848	>	//to avoid memory reallocation, reserve enough space identArray
849	>	identArray.reserve(getNAtoms());
850	>
851	>	for(mol = beginMolecule(mi); mol != NULL; mol = nextMolecule(mi)) {
852	>	for(atom = mol->beginAtom(ai); atom != NULL; atom = mol->nextAtom(ai)) {
853	>	identArray.push_back(atom->getIdent());
854	>	}
855	>	}
856	>
857	>	//fill molMembershipArray
858	>	//molMembershipArray is filled by SimCreator
859	>	std::vector<int> molMembershipArray(nGlobalAtoms_);
860	>	for (int i = 0; i < nGlobalAtoms_; i++) {
861	>	molMembershipArray[i] = globalMolMembership_[i] + 1;
862	>	}
863	>
864	>	//setup fortran simulation
865	>	int nGlobalExcludes = 0;
866	>	int* globalExcludes = NULL;
867	>	int* excludeList = exclude_.getExcludeList();
868	>	setFortranSim( &fInfo_, &nGlobalAtoms_, &nAtoms_, &identArray[0], &nExclude, excludeList ,
869	>	&nGlobalExcludes, globalExcludes, &molMembershipArray[0],
870	>	&mfact[0], &nCutoffGroups_, &fortranGlobalGroupMembership[0], &isError);
871	>
872	>	if( isError ){
873	>
874	>	sprintf( painCave.errMsg,
875	>	"There was an error setting the simulation information in fortran.\n" );
876	>	painCave.isFatal = 1;
877	>	painCave.severity = OOPSE_ERROR;
878	>	simError();
879	>	}
880	>
881		#ifdef IS_MPI
882	<	numAtom = mpiSim->getNAtomsGlobal();
883	<	#else
884	<	numAtom = n_atoms;
882	>	sprintf( checkPointMsg,
883	>	"succesfully sent the simulation information to fortran.\n");
884	>	MPIcheckPoint();
885	>	#endif // is_mpi
886	>	}
887	>
888	>
889	>	#ifdef IS_MPI
890	>	void SimInfo::setupFortranParallel() {
891	>
892	>	//SimInfo is responsible for creating localToGlobalAtomIndex and localToGlobalGroupIndex
893	>	std::vector<int> localToGlobalAtomIndex(getNAtoms(), 0);
894	>	std::vector<int> localToGlobalCutoffGroupIndex;
895	>	SimInfo::MoleculeIterator mi;
896	>	Molecule::AtomIterator ai;
897	>	Molecule::CutoffGroupIterator ci;
898	>	Molecule* mol;
899	>	Atom* atom;
900	>	CutoffGroup* cg;
901	>	mpiSimData parallelData;
902	>	int isError;
903	>
904	>	for (mol = beginMolecule(mi); mol != NULL; mol  = nextMolecule(mi)) {
905	>
906	>	//local index(index in DataStorge) of atom is important
907	>	for (atom = mol->beginAtom(ai); atom != NULL; atom = mol->nextAtom(ai)) {
908	>	localToGlobalAtomIndex[atom->getLocalIndex()] = atom->getGlobalIndex() + 1;
909	>	}
910	>
911	>	//local index of cutoff group is trivial, it only depends on the order of travesing
912	>	for (cg = mol->beginCutoffGroup(ci); cg != NULL; cg = mol->nextCutoffGroup(ci)) {
913	>	localToGlobalCutoffGroupIndex.push_back(cg->getGlobalIndex() + 1);
914	>	}
915	>
916	>	}
917	>
918	>	//fill up mpiSimData struct
919	>	parallelData.nMolGlobal = getNGlobalMolecules();
920	>	parallelData.nMolLocal = getNMolecules();
921	>	parallelData.nAtomsGlobal = getNGlobalAtoms();
922	>	parallelData.nAtomsLocal = getNAtoms();
923	>	parallelData.nGroupsGlobal = getNGlobalCutoffGroups();
924	>	parallelData.nGroupsLocal = getNCutoffGroups();
925	>	parallelData.myNode = worldRank;
926	>	MPI_Comm_size(MPI_COMM_WORLD, &(parallelData.nProcessors));
927	>
928	>	//pass mpiSimData struct and index arrays to fortran
929	>	setFsimParallel(&parallelData, &(parallelData.nAtomsLocal),
930	>	&localToGlobalAtomIndex[0],  &(parallelData.nGroupsLocal),
931	>	&localToGlobalCutoffGroupIndex[0], &isError);
932	>
933	>	if (isError) {
934	>	sprintf(painCave.errMsg,
935	>	"mpiRefresh errror: fortran didn't like something we gave it.\n");
936	>	painCave.isFatal = 1;
937	>	simError();
938	>	}
939	>
940	>	sprintf(checkPointMsg, " mpiRefresh successful.\n");
941	>	MPIcheckPoint();
942	>
943	>
944	>	}
945	>
946		#endif
603	–	for (int i = 0; i < numAtom; i++)
604	–	FglobalGroupMembership.push_back(globalGroupMembership[i] + 1);
605	–
947
948	<	myMols = info->molecules;
949	<	numMol = info->n_mol;
950	<	for(int i  = 0; i < numMol; i++){
610	<	numCutoffGroups = myMols[i].getNCutoffGroups();
611	<	for(myCutoffGroup =myMols[i].beginCutoffGroup(iterCutoff);
612	<	myCutoffGroup != NULL;
613	<	myCutoffGroup =myMols[i].nextCutoffGroup(iterCutoff)){
948	>	void SimInfo::setupCutoff() {
949	>
950	>	ForceFieldOptions& forceFieldOptions_ = forceField_->getForceFieldOptions();
951
952	<	totalMass = myCutoffGroup->getMass();
952	>	// Check the cutoff policy
953	>	int cp =  TRADITIONAL_CUTOFF_POLICY; // Set to traditional by default
954	>
955	>	std::string myPolicy;
956	>	if (forceFieldOptions_.haveCutoffPolicy()){
957	>	myPolicy = forceFieldOptions_.getCutoffPolicy();
958	>	}else if (simParams_->haveCutoffPolicy()) {
959	>	myPolicy = simParams_->getCutoffPolicy();
960	>	}
961	>
962	>	if (!myPolicy.empty()){
963	>	toUpper(myPolicy);
964	>	if (myPolicy == "MIX") {
965	>	cp = MIX_CUTOFF_POLICY;
966	>	} else {
967	>	if (myPolicy == "MAX") {
968	>	cp = MAX_CUTOFF_POLICY;
969	>	} else {
970	>	if (myPolicy == "TRADITIONAL") {
971	>	cp = TRADITIONAL_CUTOFF_POLICY;
972	>	} else {
973	>	// throw error
974	>	sprintf( painCave.errMsg,
975	>	"SimInfo error: Unknown cutoffPolicy. (Input file specified %s .)\n\tcutoffPolicy must be one of: \"Mix\", \"Max\", or \"Traditional\".", myPolicy.c_str() );
976	>	painCave.isFatal = 1;
977	>	simError();
978	>	}
979	>	}
980	>	}
981	>	}
982	>	notifyFortranCutoffPolicy(&cp);
983	>
984	>	// Check the Skin Thickness for neighborlists
985	>	RealType skin;
986	>	if (simParams_->haveSkinThickness()) {
987	>	skin = simParams_->getSkinThickness();
988	>	notifyFortranSkinThickness(&skin);
989	>	}
990	>
991	>	// Check if the cutoff was set explicitly:
992	>	if (simParams_->haveCutoffRadius()) {
993	>	rcut_ = simParams_->getCutoffRadius();
994	>	if (simParams_->haveSwitchingRadius()) {
995	>	rsw_  = simParams_->getSwitchingRadius();
996	>	} else {
997	>	if (fInfo_.SIM_uses_Charges |
998	>	fInfo_.SIM_uses_Dipoles |
999	>	fInfo_.SIM_uses_RF) {
1000	>
1001	>	rsw_ = 0.85 * rcut_;
1002	>	sprintf(painCave.errMsg,
1003	>	"SimCreator Warning: No value was set for the switchingRadius.\n"
1004	>	"\tOOPSE will use a default value of 85 percent of the cutoffRadius.\n"
1005	>	"\tswitchingRadius = %f. for this simulation\n", rsw_);
1006	>	painCave.isFatal = 0;
1007	>	simError();
1008	>	} else {
1009	>	rsw_ = rcut_;
1010	>	sprintf(painCave.errMsg,
1011	>	"SimCreator Warning: No value was set for the switchingRadius.\n"
1012	>	"\tOOPSE will use the same value as the cutoffRadius.\n"
1013	>	"\tswitchingRadius = %f. for this simulation\n", rsw_);
1014	>	painCave.isFatal = 0;
1015	>	simError();
1016	>	}
1017	>	}
1018
1019	<	for(cutoffAtom = myCutoffGroup->beginAtom(iterAtom);
1020	<	cutoffAtom != NULL;
1021	<	cutoffAtom = myCutoffGroup->nextAtom(iterAtom)){
1022	<	mfact.push_back(cutoffAtom->getMass()/totalMass);
1023	<	}
1019	>	notifyFortranCutoffs(&rcut_, &rsw_);
1020	>
1021	>	} else {
1022	>
1023	>	// For electrostatic atoms, we'll assume a large safe value:
1024	>	if (fInfo_.SIM_uses_Charges | fInfo_.SIM_uses_Dipoles | fInfo_.SIM_uses_RF) {
1025	>	sprintf(painCave.errMsg,
1026	>	"SimCreator Warning: No value was set for the cutoffRadius.\n"
1027	>	"\tOOPSE will use a default value of 15.0 angstroms"
1028	>	"\tfor the cutoffRadius.\n");
1029	>	painCave.isFatal = 0;
1030	>	simError();
1031	>	rcut_ = 15.0;
1032	>
1033	>	if (simParams_->haveElectrostaticSummationMethod()) {
1034	>	std::string myMethod = simParams_->getElectrostaticSummationMethod();
1035	>	toUpper(myMethod);
1036	>	if (myMethod == "SHIFTED_POTENTIAL" || myMethod == "SHIFTED_FORCE") {
1037	>	if (simParams_->haveSwitchingRadius()){
1038	>	sprintf(painCave.errMsg,
1039	>	"SimInfo Warning: A value was set for the switchingRadius\n"
1040	>	"\teven though the electrostaticSummationMethod was\n"
1041	>	"\tset to %s\n", myMethod.c_str());
1042	>	painCave.isFatal = 1;
1043	>	simError();
1044	>	}
1045	>	}
1046	>	}
1047	>
1048	>	if (simParams_->haveSwitchingRadius()){
1049	>	rsw_ = simParams_->getSwitchingRadius();
1050	>	} else {
1051	>	sprintf(painCave.errMsg,
1052	>	"SimCreator Warning: No value was set for switchingRadius.\n"
1053	>	"\tOOPSE will use a default value of\n"
1054	>	"\t0.85 * cutoffRadius for the switchingRadius\n");
1055	>	painCave.isFatal = 0;
1056	>	simError();
1057	>	rsw_ = 0.85 * rcut_;
1058	>	}
1059	>	notifyFortranCutoffs(&rcut_, &rsw_);
1060	>	} else {
1061	>	// We didn't set rcut explicitly, and we don't have electrostatic atoms, so
1062	>	// We'll punt and let fortran figure out the cutoffs later.
1063	>
1064	>	notifyFortranYouAreOnYourOwn();
1065	>
1066	>	}
1067		}
1068		}
1069
1070	<	}
1070	>	void SimInfo::setupElectrostaticSummationMethod( int isError ) {
1071	>
1072	>	int errorOut;
1073	>	int esm =  NONE;
1074	>	int sm = UNDAMPED;
1075	>	RealType alphaVal;
1076	>	RealType dielectric;
1077	>
1078	>	errorOut = isError;
1079	>	alphaVal = simParams_->getDampingAlpha();
1080	>	dielectric = simParams_->getDielectric();
1081	>
1082	>	if (simParams_->haveElectrostaticSummationMethod()) {
1083	>	std::string myMethod = simParams_->getElectrostaticSummationMethod();
1084	>	toUpper(myMethod);
1085	>	if (myMethod == "NONE") {
1086	>	esm = NONE;
1087	>	} else {
1088	>	if (myMethod == "SWITCHING_FUNCTION") {
1089	>	esm = SWITCHING_FUNCTION;
1090	>	} else {
1091	>	if (myMethod == "SHIFTED_POTENTIAL") {
1092	>	esm = SHIFTED_POTENTIAL;
1093	>	} else {
1094	>	if (myMethod == "SHIFTED_FORCE") {
1095	>	esm = SHIFTED_FORCE;
1096	>	} else {
1097	>	if (myMethod == "REACTION_FIELD") {
1098	>	esm = REACTION_FIELD;
1099	>	} else {
1100	>	// throw error
1101	>	sprintf( painCave.errMsg,
1102	>	"SimInfo error: Unknown electrostaticSummationMethod.\n"
1103	>	"\t(Input file specified %s .)\n"
1104	>	"\telectrostaticSummationMethod must be one of: \"none\",\n"
1105	>	"\t\"shifted_potential\", \"shifted_force\", or \n"
1106	>	"\t\"reaction_field\".\n", myMethod.c_str() );
1107	>	painCave.isFatal = 1;
1108	>	simError();
1109	>	}
1110	>	}
1111	>	}
1112	>	}
1113	>	}
1114	>	}
1115	>
1116	>	if (simParams_->haveElectrostaticScreeningMethod()) {
1117	>	std::string myScreen = simParams_->getElectrostaticScreeningMethod();
1118	>	toUpper(myScreen);
1119	>	if (myScreen == "UNDAMPED") {
1120	>	sm = UNDAMPED;
1121	>	} else {
1122	>	if (myScreen == "DAMPED") {
1123	>	sm = DAMPED;
1124	>	if (!simParams_->haveDampingAlpha()) {
1125	>	//throw error
1126	>	sprintf( painCave.errMsg,
1127	>	"SimInfo warning: dampingAlpha was not specified in the input file.\n"
1128	>	"\tA default value of %f (1/ang) will be used.\n", alphaVal);
1129	>	painCave.isFatal = 0;
1130	>	simError();
1131	>	}
1132	>	} else {
1133	>	// throw error
1134	>	sprintf( painCave.errMsg,
1135	>	"SimInfo error: Unknown electrostaticScreeningMethod.\n"
1136	>	"\t(Input file specified %s .)\n"
1137	>	"\telectrostaticScreeningMethod must be one of: \"undamped\"\n"
1138	>	"or \"damped\".\n", myScreen.c_str() );
1139	>	painCave.isFatal = 1;
1140	>	simError();
1141	>	}
1142	>	}
1143	>	}
1144	>
1145	>	// let's pass some summation method variables to fortran
1146	>	setElectrostaticSummationMethod( &esm );
1147	>	setFortranElectrostaticMethod( &esm );
1148	>	setScreeningMethod( &sm );
1149	>	setDampingAlpha( &alphaVal );
1150	>	setReactionFieldDielectric( &dielectric );
1151	>	initFortranFF( &errorOut );
1152	>	}
1153	>
1154	>	void SimInfo::setupSwitchingFunction() {
1155	>	int ft = CUBIC;
1156	>
1157	>	if (simParams_->haveSwitchingFunctionType()) {
1158	>	std::string funcType = simParams_->getSwitchingFunctionType();
1159	>	toUpper(funcType);
1160	>	if (funcType == "CUBIC") {
1161	>	ft = CUBIC;
1162	>	} else {
1163	>	if (funcType == "FIFTH_ORDER_POLYNOMIAL") {
1164	>	ft = FIFTH_ORDER_POLY;
1165	>	} else {
1166	>	// throw error
1167	>	sprintf( painCave.errMsg,
1168	>	"SimInfo error: Unknown switchingFunctionType. (Input file specified %s .)\n\tswitchingFunctionType must be one of: \"cubic\" or \"fifth_order_polynomial\".", funcType.c_str() );
1169	>	painCave.isFatal = 1;
1170	>	simError();
1171	>	}
1172	>	}
1173	>	}
1174	>
1175	>	// send switching function notification to switcheroo
1176	>	setFunctionType(&ft);
1177	>
1178	>	}
1179	>
1180	>	void SimInfo::setupAccumulateBoxDipole() {
1181	>
1182	>	// we only call setAccumulateBoxDipole if the accumulateBoxDipole parameter is true
1183	>	if ( simParams_->haveAccumulateBoxDipole() )
1184	>	if ( simParams_->getAccumulateBoxDipole() ) {
1185	>	setAccumulateBoxDipole();
1186	>	calcBoxDipole_ = true;
1187	>	}
1188	>
1189	>	}
1190	>
1191	>	void SimInfo::addProperty(GenericData* genData) {
1192	>	properties_.addProperty(genData);
1193	>	}
1194	>
1195	>	void SimInfo::removeProperty(const std::string& propName) {
1196	>	properties_.removeProperty(propName);
1197	>	}
1198	>
1199	>	void SimInfo::clearProperties() {
1200	>	properties_.clearProperties();
1201	>	}
1202	>
1203	>	std::vector<std::string> SimInfo::getPropertyNames() {
1204	>	return properties_.getPropertyNames();
1205	>	}
1206	>
1207	>	std::vector<GenericData*> SimInfo::getProperties() {
1208	>	return properties_.getProperties();
1209	>	}
1210	>
1211	>	GenericData* SimInfo::getPropertyByName(const std::string& propName) {
1212	>	return properties_.getPropertyByName(propName);
1213	>	}
1214	>
1215	>	void SimInfo::setSnapshotManager(SnapshotManager* sman) {
1216	>	if (sman_ == sman) {
1217	>	return;
1218	>	}
1219	>	delete sman_;
1220	>	sman_ = sman;
1221	>
1222	>	Molecule* mol;
1223	>	RigidBody* rb;
1224	>	Atom* atom;
1225	>	SimInfo::MoleculeIterator mi;
1226	>	Molecule::RigidBodyIterator rbIter;
1227	>	Molecule::AtomIterator atomIter;;
1228	>
1229	>	for (mol = beginMolecule(mi); mol != NULL; mol = nextMolecule(mi)) {
1230	>
1231	>	for (atom = mol->beginAtom(atomIter); atom != NULL; atom = mol->nextAtom(atomIter)) {
1232	>	atom->setSnapshotManager(sman_);
1233	>	}
1234	>
1235	>	for (rb = mol->beginRigidBody(rbIter); rb != NULL; rb = mol->nextRigidBody(rbIter)) {
1236	>	rb->setSnapshotManager(sman_);
1237	>	}
1238	>	}
1239	>
1240	>	}
1241	>
1242	>	Vector3d SimInfo::getComVel(){
1243	>	SimInfo::MoleculeIterator i;
1244	>	Molecule* mol;
1245	>
1246	>	Vector3d comVel(0.0);
1247	>	RealType totalMass = 0.0;
1248	>
1249	>
1250	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
1251	>	RealType mass = mol->getMass();
1252	>	totalMass += mass;
1253	>	comVel += mass * mol->getComVel();
1254	>	}
1255	>
1256	>	#ifdef IS_MPI
1257	>	RealType tmpMass = totalMass;
1258	>	Vector3d tmpComVel(comVel);
1259	>	MPI_Allreduce(&tmpMass,&totalMass,1,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1260	>	MPI_Allreduce(tmpComVel.getArrayPointer(), comVel.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1261	>	#endif
1262	>
1263	>	comVel /= totalMass;
1264	>
1265	>	return comVel;
1266	>	}
1267	>
1268	>	Vector3d SimInfo::getCom(){
1269	>	SimInfo::MoleculeIterator i;
1270	>	Molecule* mol;
1271	>
1272	>	Vector3d com(0.0);
1273	>	RealType totalMass = 0.0;
1274	>
1275	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
1276	>	RealType mass = mol->getMass();
1277	>	totalMass += mass;
1278	>	com += mass * mol->getCom();
1279	>	}
1280	>
1281	>	#ifdef IS_MPI
1282	>	RealType tmpMass = totalMass;
1283	>	Vector3d tmpCom(com);
1284	>	MPI_Allreduce(&tmpMass,&totalMass,1,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1285	>	MPI_Allreduce(tmpCom.getArrayPointer(), com.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1286	>	#endif
1287	>
1288	>	com /= totalMass;
1289	>
1290	>	return com;
1291	>
1292	>	}
1293	>
1294	>	std::ostream& operator <<(std::ostream& o, SimInfo& info) {
1295	>
1296	>	return o;
1297	>	}
1298	>
1299	>
1300	>	/*
1301	>	Returns center of mass and center of mass velocity in one function call.
1302	>	*/
1303	>
1304	>	void SimInfo::getComAll(Vector3d &com, Vector3d &comVel){
1305	>	SimInfo::MoleculeIterator i;
1306	>	Molecule* mol;
1307	>
1308	>
1309	>	RealType totalMass = 0.0;
1310	>
1311	>
1312	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
1313	>	RealType mass = mol->getMass();
1314	>	totalMass += mass;
1315	>	com += mass * mol->getCom();
1316	>	comVel += mass * mol->getComVel();
1317	>	}
1318	>
1319	>	#ifdef IS_MPI
1320	>	RealType tmpMass = totalMass;
1321	>	Vector3d tmpCom(com);
1322	>	Vector3d tmpComVel(comVel);
1323	>	MPI_Allreduce(&tmpMass,&totalMass,1,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1324	>	MPI_Allreduce(tmpCom.getArrayPointer(), com.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1325	>	MPI_Allreduce(tmpComVel.getArrayPointer(), comVel.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1326	>	#endif
1327	>
1328	>	com /= totalMass;
1329	>	comVel /= totalMass;
1330	>	}
1331	>
1332	>	/*
1333	>	Return intertia tensor for entire system and angular momentum Vector.
1334	>
1335	>
1336	>	[  Ixx -Ixy  -Ixz ]
1337	>	J =| -Iyx  Iyy  -Iyz |
1338	>	[ -Izx -Iyz   Izz ]
1339	>	*/
1340	>
1341	>	void SimInfo::getInertiaTensor(Mat3x3d &inertiaTensor, Vector3d &angularMomentum){
1342	>
1343	>
1344	>	RealType xx = 0.0;
1345	>	RealType yy = 0.0;
1346	>	RealType zz = 0.0;
1347	>	RealType xy = 0.0;
1348	>	RealType xz = 0.0;
1349	>	RealType yz = 0.0;
1350	>	Vector3d com(0.0);
1351	>	Vector3d comVel(0.0);
1352	>
1353	>	getComAll(com, comVel);
1354	>
1355	>	SimInfo::MoleculeIterator i;
1356	>	Molecule* mol;
1357	>
1358	>	Vector3d thisq(0.0);
1359	>	Vector3d thisv(0.0);
1360	>
1361	>	RealType thisMass = 0.0;
1362	>
1363	>
1364	>
1365	>
1366	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
1367	>
1368	>	thisq = mol->getCom()-com;
1369	>	thisv = mol->getComVel()-comVel;
1370	>	thisMass = mol->getMass();
1371	>	// Compute moment of intertia coefficients.
1372	>	xx += thisq[0]*thisq[0]*thisMass;
1373	>	yy += thisq[1]*thisq[1]*thisMass;
1374	>	zz += thisq[2]*thisq[2]*thisMass;
1375	>
1376	>	// compute products of intertia
1377	>	xy += thisq[0]*thisq[1]*thisMass;
1378	>	xz += thisq[0]*thisq[2]*thisMass;
1379	>	yz += thisq[1]*thisq[2]*thisMass;
1380	>
1381	>	angularMomentum += cross( thisq, thisv ) * thisMass;
1382	>
1383	>	}
1384	>
1385	>
1386	>	inertiaTensor(0,0) = yy + zz;
1387	>	inertiaTensor(0,1) = -xy;
1388	>	inertiaTensor(0,2) = -xz;
1389	>	inertiaTensor(1,0) = -xy;
1390	>	inertiaTensor(1,1) = xx + zz;
1391	>	inertiaTensor(1,2) = -yz;
1392	>	inertiaTensor(2,0) = -xz;
1393	>	inertiaTensor(2,1) = -yz;
1394	>	inertiaTensor(2,2) = xx + yy;
1395	>
1396	>	#ifdef IS_MPI
1397	>	Mat3x3d tmpI(inertiaTensor);
1398	>	Vector3d tmpAngMom;
1399	>	MPI_Allreduce(tmpI.getArrayPointer(), inertiaTensor.getArrayPointer(),9,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1400	>	MPI_Allreduce(tmpAngMom.getArrayPointer(), angularMomentum.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1401	>	#endif
1402	>
1403	>	return;
1404	>	}
1405	>
1406	>	//Returns the angular momentum of the system
1407	>	Vector3d SimInfo::getAngularMomentum(){
1408	>
1409	>	Vector3d com(0.0);
1410	>	Vector3d comVel(0.0);
1411	>	Vector3d angularMomentum(0.0);
1412	>
1413	>	getComAll(com,comVel);
1414	>
1415	>	SimInfo::MoleculeIterator i;
1416	>	Molecule* mol;
1417	>
1418	>	Vector3d thisr(0.0);
1419	>	Vector3d thisp(0.0);
1420	>
1421	>	RealType thisMass;
1422	>
1423	>	for (mol = beginMolecule(i); mol != NULL; mol = nextMolecule(i)) {
1424	>	thisMass = mol->getMass();
1425	>	thisr = mol->getCom()-com;
1426	>	thisp = (mol->getComVel()-comVel)*thisMass;
1427	>
1428	>	angularMomentum += cross( thisr, thisp );
1429	>
1430	>	}
1431	>
1432	>	#ifdef IS_MPI
1433	>	Vector3d tmpAngMom;
1434	>	MPI_Allreduce(tmpAngMom.getArrayPointer(), angularMomentum.getArrayPointer(),3,MPI_REALTYPE,MPI_SUM, MPI_COMM_WORLD);
1435	>	#endif
1436	>
1437	>	return angularMomentum;
1438	>	}
1439	>
1440	>	StuntDouble* SimInfo::getIOIndexToIntegrableObject(int index) {
1441	>	return IOIndexToIntegrableObject.at(index);
1442	>	}
1443	>
1444	>	void SimInfo::setIOIndexToIntegrableObject(const std::vector<StuntDouble*>& v) {
1445	>	IOIndexToIntegrableObject= v;
1446	>	}
1447	>
1448	>	/*
1449	>	void SimInfo::setStuntDoubleFromGlobalIndex(std::vector<StuntDouble*> v) {
1450	>	assert( v.size() == nAtoms_ + nRigidBodies_);
1451	>	sdByGlobalIndex_ = v;
1452	>	}
1453	>
1454	>	StuntDouble* SimInfo::getStuntDoubleFromGlobalIndex(int index) {
1455	>	//assert(index < nAtoms_ + nRigidBodies_);
1456	>	return sdByGlobalIndex_.at(index);
1457	>	}
1458	>	*/
1459	>	}//end namespace oopse
1460	>

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines