applications/staticProps/StaticProps.cpp

/*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Acknowledgement of the program authors must be made in any
 *    publication of scientific results based in part on use of the
 *    program.  An acceptable form of acknowledgement is citation of
 *    the article in which the program was described (Matthew
 *    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
 *    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
 *    Parallel Simulation Engine for Molecular Dynamics,"
 *    J. Comput. Chem. 26, pp. 252-271 (2005))
 *
 * 2. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 3. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 */
 
#include <iostream>
#include <fstream>
#include <string>

#include "brains/Register.hpp"
#include "brains/SimCreator.hpp"
#include "brains/SimInfo.hpp"
#include "io/DumpReader.hpp"
#include "utils/simError.h"

#include "applications/staticProps/StaticPropsCmd.h"
#include "applications/staticProps/StaticAnalyser.hpp"
#include "applications/staticProps/GofR.hpp"
#include "applications/staticProps/GofRAngle.hpp"
#include "applications/staticProps/GofAngle2.hpp"
#include "applications/staticProps/GofXyz.hpp"
#include "applications/staticProps/P2OrderParameter.hpp"
#include "applications/staticProps/BondOrderParameter.hpp"
#include "applications/staticProps/BOPofR.hpp"
#include "applications/staticProps/RippleOP.hpp"
#include "applications/staticProps/SCDOrderParameter.hpp"
#include "applications/staticProps/DensityPlot.hpp"
#include "applications/staticProps/RhoZ.hpp"
#include "applications/staticProps/BondAngleDistribution.hpp"
#include "applications/staticProps/NanoVolume.hpp"
#if defined(HAVE_FFTW_H) || defined(HAVE_DFFTW_H) || defined(HAVE_FFTW3_H)
#include "applications/staticProps/Hxy.hpp"
#endif
#include "applications/staticProps/RhoR.hpp"

using namespace oopse;

int main(int argc, char* argv[]){
  
  //register force fields
  registerForceFields();

  gengetopt_args_info args_info;

  //parse the command line option
  if (cmdline_parser (argc, argv, &args_info) != 0) {
    exit(1) ;
  }

  //get the dumpfile name
  std::string dumpFileName = args_info.input_arg;
  std::string sele1;
  std::string sele2;
  bool userSpecifiedSelect1;
  bool userSpecifiedSelect2;

  // check the first selection argument, or set it to the environment
  // variable, or failing that, set it to "select all"

  if (args_info.sele1_given) {
    sele1 = args_info.sele1_arg;
  } else {
    char*  sele1Env= getenv("OOPSE_SELE1");
    if (sele1Env) {
      sele1 = sele1Env;
    } else {
      sele1 = "select all";
    }
  }

  // check the second selection argument, or set it to the environment
  // variable, or failing that, set it to "select all"
  
  if (args_info.sele2_given) {
    sele2 = args_info.sele2_arg;
  } else {
    char* sele2Env = getenv("OOPSE_SELE2");
    if (sele2Env) {
      sele2 = sele2Env;            
    } else { 
      sele2 = "select all";
    }
  }


  // Problems if sele1 wasn't specified, but 
// if (!args_info.scd_given) {
//       sprintf( painCave.errMsg,
//                "neither --sele1 option nor $OOPSE_SELE1 is set");
//       painCave.severity = OOPSE_ERROR;
//       painCave.isFatal = 1;
//       simError();
//     }
//   }

  // Problems if sele1 wasn't specified

//     if(!args_info.scd_given && !args_info.density_given && !args_info.slab_density_given)  {
//       sprintf( painCave.errMsg,
//                "neither --sele2 option nor $OOPSE_SELE2 is set");
//       painCave.severity = OOPSE_ERROR;
//       painCave.isFatal = 1;
//       simError();        
//     }
//   }

  bool batchMode;
  if (args_info.scd_given){
    if (args_info.sele1_given && args_info.sele2_given && args_info.sele3_given) {
      batchMode = false;
    } else if (args_info.molname_given && args_info.begin_given && args_info.end_given) {
      if (args_info.begin_arg < 0 || args_info.end_arg < 0 || args_info.begin_arg > args_info.end_arg-2) {
        sprintf( painCave.errMsg,
                 "below conditions are not satisfied:\n"
                 "0 <= begin && 0<= end && begin <= end-2\n");
        painCave.severity = OOPSE_ERROR;
        painCave.isFatal = 1;
        simError();                    
      }
      batchMode = true;        
    } else{
      sprintf( painCave.errMsg,
               "either --sele1, --sele2, --sele3 are specified,"
               " or --molname, --begin, --end are specified\n");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();        
    
    }
  }

  //parse md file and set up the system
  SimCreator creator;
  std::cout << "dumpFile = " << dumpFileName << "\n";
  SimInfo* info = creator.createSim(dumpFileName);

  RealType maxLen;
  if (args_info.length_given) {
    maxLen = args_info.length_arg;
  } else {
    Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
    maxLen = std::min(std::min(hmat(0, 0), hmat(1, 1)), hmat(2, 2)) /2.0;        
  }    

  StaticAnalyser* analyser;
  if (args_info.gofr_given){
    analyser= new GofR(info, dumpFileName, sele1, sele2, maxLen, 
                       args_info.nbins_arg);        
  } else if (args_info.r_theta_given) {
    analyser  = new GofRTheta(info, dumpFileName, sele1, sele2, maxLen, 
                              args_info.nbins_arg, args_info.nanglebins_arg);
  } else if (args_info.r_omega_given) {
    analyser  = new GofROmega(info, dumpFileName, sele1, sele2, maxLen, 
                              args_info.nbins_arg, args_info.nanglebins_arg);
  } else if (args_info.theta_omega_given) {
    analyser  = new GofAngle2(info, dumpFileName, sele1, sele2, 
                              args_info.nanglebins_arg);
  } else if (args_info.gxyz_given) {
    if (args_info.refsele_given) {
      analyser= new GofXyz(info, dumpFileName, sele1, sele2,args_info.refsele_arg, 
                           maxLen, args_info.nbins_arg);        
    } else {
      sprintf( painCave.errMsg,
               "--refsele must set when --gxyz is used");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();  
    }
  } else if (args_info.p2_given) {
    analyser  = new P2OrderParameter(info, dumpFileName, sele1, sele2);
  } else if (args_info.rp2_given){
    analyser = new RippleOP(info, dumpFileName, sele1, sele2);
  } else if (args_info.bo_given){
    if (args_info.rcut_given) {
      analyser = new BondOrderParameter(info, dumpFileName, sele1, 
                                        args_info.rcut_arg, 
                                        args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.bor_given){
    if (args_info.rcut_given) {
      analyser = new BOPofR(info, dumpFileName, sele1, args_info.rcut_arg,
                            args_info.nbins_arg, maxLen);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.bad_given){
    if (args_info.rcut_given) {
      analyser = new BondAngleDistribution(info, dumpFileName, sele1, args_info.rcut_arg,
                            args_info.nbins_arg);
    } else {
      sprintf( painCave.errMsg,
               "A cutoff radius (rcut) must be specified when calculating Bond Angle Distributions");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();
    }
  } else if (args_info.scd_given) {
    if (batchMode) {
      analyser  = new SCDOrderParameter(info, dumpFileName, args_info.molname_arg, 
                                        args_info.begin_arg, args_info.end_arg);
    } else{
      std::string sele3 = args_info.sele3_arg;
      analyser  = new SCDOrderParameter(info, dumpFileName, sele1, sele2, sele3);
    }
  }else if (args_info.density_given) {
    analyser= new DensityPlot(info, dumpFileName, sele1, sele2, maxLen, 
                              args_info.nbins_arg);  
  } else if (args_info.slab_density_given) {
    Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
    analyser = new RhoZ(info, dumpFileName, sele1, hmat(2, 2), args_info.nbins_arg);
#if defined(HAVE_FFTW_H) || defined(HAVE_DFFTW_H) || defined(HAVE_FFTW3_H)
  }else if (args_info.hxy_given) {
    analyser = new Hxy(info, dumpFileName, sele1, args_info.nbins_x_arg, 
                       args_info.nbins_y_arg, args_info.nbins_arg);
#endif
  }else if (args_info.rho_r_given) {
    if (args_info.radius_given){
      analyser = new RhoR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg,args_info.radius_arg);
    }else{
      sprintf( painCave.errMsg,
               "A particle radius (radius) must be specified when calculating Rho(r)");
      painCave.severity = OOPSE_ERROR;
      painCave.isFatal = 1;
      simError();
    }
        }else if (args_info.hullvol_given) {
    analyser = new NanoVolume(info, dumpFileName, sele1);
  }
  
  if (args_info.output_given) {
    analyser->setOutputName(args_info.output_arg);
  }
  if (args_info.step_given) {
    analyser->setStep(args_info.step_arg);
  }

  analyser->process();

  delete analyser;    
  delete info;

  return 0;   
}

Revision:	1180
Committed:	Mon Sep 17 20:05:51 2007 UTC (17 years, 7 months ago) by chuckv
Original Path:	*trunk/src/applications/staticProps/StaticProps.cpp*
File size:	10819 byte(s)
Log Message:	Added code to compute bond angle distributions.
#	User	Rev	Content
1	gezelter	507	/*
2	tim	310	* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3			*
4			* The University of Notre Dame grants you ("Licensee") a
5			* non-exclusive, royalty free, license to use, modify and
6			* redistribute this software in source and binary code form, provided
7			* that the following conditions are met:
8			*
9			* 1. Acknowledgement of the program authors must be made in any
10			* publication of scientific results based in part on use of the
11			* program. An acceptable form of acknowledgement is citation of
12			* the article in which the program was described (Matthew
13			* A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14			* J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15			* Parallel Simulation Engine for Molecular Dynamics,"
16			* J. Comput. Chem. 26, pp. 252-271 (2005))
17			*
18			* 2. Redistributions of source code must retain the above copyright
19			* notice, this list of conditions and the following disclaimer.
20			*
21			* 3. Redistributions in binary form must reproduce the above copyright
22			* notice, this list of conditions and the following disclaimer in the
23			* documentation and/or other materials provided with the
24			* distribution.
25			*
26			* This software is provided "AS IS," without a warranty of any
27			* kind. All express or implied conditions, representations and
28			* warranties, including any implied warranty of merchantability,
29			* fitness for a particular purpose or non-infringement, are hereby
30			* excluded. The University of Notre Dame and its licensors shall not
31			* be liable for any damages suffered by licensee as a result of
32			* using, modifying or distributing the software or its
33			* derivatives. In no event will the University of Notre Dame or its
34			* licensors be liable for any lost revenue, profit or data, or for
35			* direct, indirect, special, consequential, incidental or punitive
36			* damages, however caused and regardless of the theory of liability,
37			* arising out of the use of or inability to use software, even if the
38			* University of Notre Dame has been advised of the possibility of
39			* such damages.
40			*/
41
42			#include <iostream>
43			#include <fstream>
44			#include <string>
45
46			#include "brains/Register.hpp"
47			#include "brains/SimCreator.hpp"
48			#include "brains/SimInfo.hpp"
49			#include "io/DumpReader.hpp"
50			#include "utils/simError.h"
51
52	tim	311	#include "applications/staticProps/StaticPropsCmd.h"
53	tim	543	#include "applications/staticProps/StaticAnalyser.hpp"
54	tim	311	#include "applications/staticProps/GofR.hpp"
55			#include "applications/staticProps/GofRAngle.hpp"
56			#include "applications/staticProps/GofAngle2.hpp"
57			#include "applications/staticProps/GofXyz.hpp"
58	tim	543	#include "applications/staticProps/P2OrderParameter.hpp"
59	gezelter	1039	#include "applications/staticProps/BondOrderParameter.hpp"
60	chuckv	1128	#include "applications/staticProps/BOPofR.hpp"
61	xsun	980	#include "applications/staticProps/RippleOP.hpp"
62	tim	544	#include "applications/staticProps/SCDOrderParameter.hpp"
63	tim	545	#include "applications/staticProps/DensityPlot.hpp"
64	tim	840	#include "applications/staticProps/RhoZ.hpp"
65	chuckv	1180	#include "applications/staticProps/BondAngleDistribution.hpp"
66			#include "applications/staticProps/NanoVolume.hpp"
67	gezelter	957	#if defined(HAVE_FFTW_H) \|\| defined(HAVE_DFFTW_H) \|\| defined(HAVE_FFTW3_H)
68	xsun	955	#include "applications/staticProps/Hxy.hpp"
69	gezelter	956	#endif
70	chuckv	1091	#include "applications/staticProps/RhoR.hpp"
71	tim	311
72	tim	310	using namespace oopse;
73
74			int main(int argc, char* argv[]){
75
76	gezelter	507	//register force fields
77			registerForceFields();
78	tim	310
79	gezelter	507	gengetopt_args_info args_info;
80	tim	310
81	gezelter	507	//parse the command line option
82			if (cmdline_parser (argc, argv, &args_info) != 0) {
83			exit(1) ;
84			}
85	tim	310
86	gezelter	1039	//get the dumpfile name
87	gezelter	507	std::string dumpFileName = args_info.input_arg;
88			std::string sele1;
89			std::string sele2;
90	gezelter	1039	bool userSpecifiedSelect1;
91			bool userSpecifiedSelect2;
92	tim	310
93	gezelter	1039	// check the first selection argument, or set it to the environment
94			// variable, or failing that, set it to "select all"
95
96	gezelter	507	if (args_info.sele1_given) {
97			sele1 = args_info.sele1_arg;
98	gezelter	1039	} else {
99	gezelter	507	char* sele1Env= getenv("OOPSE_SELE1");
100			if (sele1Env) {
101			sele1 = sele1Env;
102	gezelter	1039	} else {
103			sele1 = "select all";
104	tim	310	}
105	gezelter	507	}
106	gezelter	1039
107			// check the second selection argument, or set it to the environment
108			// variable, or failing that, set it to "select all"
109
110	gezelter	507	if (args_info.sele2_given) {
111			sele2 = args_info.sele2_arg;
112	gezelter	1039	} else {
113	gezelter	507	char* sele2Env = getenv("OOPSE_SELE2");
114			if (sele2Env) {
115			sele2 = sele2Env;
116	gezelter	1039	} else {
117	tim	558	sele2 = "select all";
118	tim	311	}
119	gezelter	507	}
120	tim	310
121	gezelter	1039
122			// Problems if sele1 wasn't specified, but
123			// if (!args_info.scd_given) {
124			// sprintf( painCave.errMsg,
125			// "neither --sele1 option nor $OOPSE_SELE1 is set");
126			// painCave.severity = OOPSE_ERROR;
127			// painCave.isFatal = 1;
128			// simError();
129			// }
130			// }
131
132			// Problems if sele1 wasn't specified
133
134			// if(!args_info.scd_given && !args_info.density_given && !args_info.slab_density_given) {
135			// sprintf( painCave.errMsg,
136			// "neither --sele2 option nor $OOPSE_SELE2 is set");
137			// painCave.severity = OOPSE_ERROR;
138			// painCave.isFatal = 1;
139			// simError();
140			// }
141			// }
142
143	tim	544	bool batchMode;
144			if (args_info.scd_given){
145			if (args_info.sele1_given && args_info.sele2_given && args_info.sele3_given) {
146	gezelter	1039	batchMode = false;
147	tim	544	} else if (args_info.molname_given && args_info.begin_given && args_info.end_given) {
148	gezelter	1039	if (args_info.begin_arg < 0 \|\| args_info.end_arg < 0 \|\| args_info.begin_arg > args_info.end_arg-2) {
149	tim	544	sprintf( painCave.errMsg,
150	gezelter	1039	"below conditions are not satisfied:\n"
151			"0 <= begin && 0<= end && begin <= end-2\n");
152	tim	544	painCave.severity = OOPSE_ERROR;
153			painCave.isFatal = 1;
154	gezelter	1039	simError();
155			}
156			batchMode = true;
157			} else{
158			sprintf( painCave.errMsg,
159			"either --sele1, --sele2, --sele3 are specified,"
160			" or --molname, --begin, --end are specified\n");
161			painCave.severity = OOPSE_ERROR;
162			painCave.isFatal = 1;
163			simError();
164	tim	544
165			}
166			}
167
168	gezelter	507	//parse md file and set up the system
169			SimCreator creator;
170	gezelter	1051	std::cout << "dumpFile = " << dumpFileName << "\n";
171	gezelter	1026	SimInfo* info = creator.createSim(dumpFileName);
172	tim	311
173	tim	963	RealType maxLen;
174	gezelter	507	if (args_info.length_given) {
175			maxLen = args_info.length_arg;
176			} else {
177			Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
178			maxLen = std::min(std::min(hmat(0, 0), hmat(1, 1)), hmat(2, 2)) /2.0;
179			}
180
181	tim	543	StaticAnalyser* analyser;
182	gezelter	507	if (args_info.gofr_given){
183	gezelter	1041	analyser= new GofR(info, dumpFileName, sele1, sele2, maxLen,
184			args_info.nbins_arg);
185	gezelter	507	} else if (args_info.r_theta_given) {
186	gezelter	1041	analyser = new GofRTheta(info, dumpFileName, sele1, sele2, maxLen,
187			args_info.nbins_arg, args_info.nanglebins_arg);
188	gezelter	507	} else if (args_info.r_omega_given) {
189	gezelter	1041	analyser = new GofROmega(info, dumpFileName, sele1, sele2, maxLen,
190			args_info.nbins_arg, args_info.nanglebins_arg);
191	gezelter	507	} else if (args_info.theta_omega_given) {
192	gezelter	1041	analyser = new GofAngle2(info, dumpFileName, sele1, sele2,
193			args_info.nanglebins_arg);
194	gezelter	507	} else if (args_info.gxyz_given) {
195			if (args_info.refsele_given) {
196	gezelter	1041	analyser= new GofXyz(info, dumpFileName, sele1, sele2,args_info.refsele_arg,
197			maxLen, args_info.nbins_arg);
198	tim	311	} else {
199	gezelter	507	sprintf( painCave.errMsg,
200	tim	369	"--refsele must set when --gxyz is used");
201	gezelter	507	painCave.severity = OOPSE_ERROR;
202			painCave.isFatal = 1;
203			simError();
204	tim	311	}
205	tim	543	} else if (args_info.p2_given) {
206	gezelter	1039	analyser = new P2OrderParameter(info, dumpFileName, sele1, sele2);
207			} else if (args_info.rp2_given){
208			analyser = new RippleOP(info, dumpFileName, sele1, sele2);
209			} else if (args_info.bo_given){
210	gezelter	1052	if (args_info.rcut_given) {
211	gezelter	1039	analyser = new BondOrderParameter(info, dumpFileName, sele1,
212			args_info.rcut_arg,
213	gezelter	1041	args_info.nbins_arg);
214	gezelter	1039	} else {
215			sprintf( painCave.errMsg,
216	gezelter	1052	"A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
217	gezelter	1039	painCave.severity = OOPSE_ERROR;
218			painCave.isFatal = 1;
219			simError();
220			}
221	chuckv	1128	} else if (args_info.bor_given){
222			if (args_info.rcut_given) {
223			analyser = new BOPofR(info, dumpFileName, sele1, args_info.rcut_arg,
224			args_info.nbins_arg, maxLen);
225			} else {
226			sprintf( painCave.errMsg,
227			"A cutoff radius (rcut) must be specified when calculating Bond Order Parameters");
228			painCave.severity = OOPSE_ERROR;
229			painCave.isFatal = 1;
230			simError();
231			}
232	chuckv	1180	} else if (args_info.bad_given){
233			if (args_info.rcut_given) {
234			analyser = new BondAngleDistribution(info, dumpFileName, sele1, args_info.rcut_arg,
235			args_info.nbins_arg);
236			} else {
237			sprintf( painCave.errMsg,
238			"A cutoff radius (rcut) must be specified when calculating Bond Angle Distributions");
239			painCave.severity = OOPSE_ERROR;
240			painCave.isFatal = 1;
241			simError();
242			}
243	gezelter	1039	} else if (args_info.scd_given) {
244			if (batchMode) {
245			analyser = new SCDOrderParameter(info, dumpFileName, args_info.molname_arg,
246			args_info.begin_arg, args_info.end_arg);
247			} else{
248			std::string sele3 = args_info.sele3_arg;
249			analyser = new SCDOrderParameter(info, dumpFileName, sele1, sele2, sele3);
250			}
251	tim	545	}else if (args_info.density_given) {
252	gezelter	1041	analyser= new DensityPlot(info, dumpFileName, sele1, sele2, maxLen,
253			args_info.nbins_arg);
254	tim	840	} else if (args_info.slab_density_given) {
255	gezelter	1039	Mat3x3d hmat = info->getSnapshotManager()->getCurrentSnapshot()->getHmat();
256	gezelter	1041	analyser = new RhoZ(info, dumpFileName, sele1, hmat(2, 2), args_info.nbins_arg);
257	gezelter	957	#if defined(HAVE_FFTW_H) \|\| defined(HAVE_DFFTW_H) \|\| defined(HAVE_FFTW3_H)
258	xsun	955	}else if (args_info.hxy_given) {
259	gezelter	1041	analyser = new Hxy(info, dumpFileName, sele1, args_info.nbins_x_arg,
260			args_info.nbins_y_arg, args_info.nbins_arg);
261	gezelter	956	#endif
262	chuckv	1091	}else if (args_info.rho_r_given) {
263			if (args_info.radius_given){
264			analyser = new RhoR(info, dumpFileName, sele1, maxLen,args_info.nbins_arg,args_info.radius_arg);
265			}else{
266			sprintf( painCave.errMsg,
267			"A particle radius (radius) must be specified when calculating Rho(r)");
268			painCave.severity = OOPSE_ERROR;
269			painCave.isFatal = 1;
270			simError();
271			}
272	chuckv	1180	}else if (args_info.hullvol_given) {
273			analyser = new NanoVolume(info, dumpFileName, sele1);
274	gezelter	507	}
275	gezelter	1039
276	gezelter	507	if (args_info.output_given) {
277	tim	543	analyser->setOutputName(args_info.output_arg);
278	gezelter	507	}
279			if (args_info.step_given) {
280	tim	543	analyser->setStep(args_info.step_arg);
281	gezelter	507	}
282	tim	311
283	tim	543	analyser->process();
284	tim	311
285	tim	543	delete analyser;
286	gezelter	507	delete info;
287	tim	310
288	gezelter	507	return 0;
289	tim	310	}
290