applications/simpleBuilder/simpleBuilder.cpp

 /*
 * Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
 *
 * The University of Notre Dame grants you ("Licensee") a
 * non-exclusive, royalty free, license to use, modify and
 * redistribute this software in source and binary code form, provided
 * that the following conditions are met:
 *
 * 1. Acknowledgement of the program authors must be made in any
 *    publication of scientific results based in part on use of the
 *    program.  An acceptable form of acknowledgement is citation of
 *    the article in which the program was described (Matthew
 *    A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
 *    J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
 *    Parallel Simulation Engine for Molecular Dynamics,"
 *    J. Comput. Chem. 26, pp. 252-271 (2005))
 *
 * 2. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 3. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 * This software is provided "AS IS," without a warranty of any
 * kind. All express or implied conditions, representations and
 * warranties, including any implied warranty of merchantability,
 * fitness for a particular purpose or non-infringement, are hereby
 * excluded.  The University of Notre Dame and its licensors shall not
 * be liable for any damages suffered by licensee as a result of
 * using, modifying or distributing the software or its
 * derivatives. In no event will the University of Notre Dame or its
 * licensors be liable for any lost revenue, profit or data, or for
 * direct, indirect, special, consequential, incidental or punitive
 * damages, however caused and regardless of the theory of liability,
 * arising out of the use of or inability to use software, even if the
 * University of Notre Dame has been advised of the possibility of
 * such damages.
 */
 
#include <cstdlib>
#include <cstdio>
#include <cstring>
#include <cmath>
#include <iostream>
#include <string>
#include <map>
#include <fstream>

#include "applications/simpleBuilder/simpleBuilderCmd.h"
#include "lattice/LatticeFactory.hpp"
#include "utils/MoLocator.hpp"
#include "lattice/Lattice.hpp"
#include "brains/Register.hpp"
#include "brains/SimInfo.hpp"
#include "brains/SimCreator.hpp"
#include "io/DumpWriter.hpp"
#include "math/Vector3.hpp"
#include "math/SquareMatrix3.hpp"
#include "utils/StringUtils.hpp"

using namespace std;
using namespace oopse;
void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
                  int numMol);

int main(int argc, char *argv []) {

    //register force fields
    registerForceFields();
    registerLattice();
    
    gengetopt_args_info args_info;
    std::string latticeType;
    std::string inputFileName;
    std::string outPrefix;
    std::string outMdFileName;
    std::string outInitFileName;
    BaseLattice *simpleLat;
    int numMol;
    double latticeConstant;
    std::vector<double> lc;
    double mass;
    const double rhoConvertConst = 1.661;
    double density;
    int nx,
    ny,
    nz;
    Mat3x3d hmat;
    MoLocator *locator;
    std::vector<Vector3d> latticePos;
    std::vector<Vector3d> latticeOrt;
    int numMolPerCell;
    int curMolIndex;
    DumpWriter *writer;

    // parse command line arguments
    if (cmdline_parser(argc, argv, &args_info) != 0)
        exit(1);

    density = args_info.density_arg;

    //get lattice type
    latticeType = UpperCase(args_info.latticetype_arg);

    if (!LatticeFactory::getInstance()->hasLatticeCreator(latticeType)) {
        std::cerr << latticeType << " is an invalid lattice type" << std::endl;
        std::cerr << LatticeFactory::getInstance()->toString() << std::endl;
        exit(1);
    }

    //get the number of unit cell
    nx = args_info.nx_arg;

    if (nx <= 0) {
        std::cerr << "The number of unit cell in h direction must be greater than 0" << std::endl;
        exit(1);
    }

    ny = args_info.ny_arg;

    if (ny <= 0) {
        std::cerr << "The number of unit cell in l direction must be greater than 0" << std::endl;
        exit(1);
    }

    nz = args_info.nz_arg;

    if (nz <= 0) {
        std::cerr << "The number of unit cell in k direction must be greater than 0" << std::endl;
        exit(1);
    }

    //get input file name
    if (args_info.inputs_num)
        inputFileName = args_info.inputs[0];
    else {
        std::cerr << "You must specify a input file name.\n" << std::endl;
        cmdline_parser_print_help();
        exit(1);
    }

    //parse md file and set up the system
    SimCreator oldCreator;
    SimInfo* oldInfo = oldCreator.createSim(inputFileName, false);

    if (oldInfo->getNMoleculeStamp()>= 2) {
        std::cerr << "can not build the system with more than two components"
            << std::endl;
        exit(1);
    }

    //get mass of molecule. 

    mass = getMolMass(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());

    //creat lattice
    simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);

    if (simpleLat == NULL) {
        std::cerr << "Error in creating lattice" << std::endl;
        exit(1);
    }

    numMolPerCell = simpleLat->getNumSitesPerCell();

    //calculate lattice constant (in Angstrom)
    latticeConstant = pow(rhoConvertConst * numMolPerCell * mass / density,
                          1.0 / 3.0);

    //set lattice constant
    lc.push_back(latticeConstant);
    simpleLat->setLatticeConstant(lc);

    //calculate the total number of molecules
    numMol = nx * ny * nz * numMolPerCell;

    if (oldInfo->getNGlobalMolecules() != numMol) {
        outPrefix = getPrefix(inputFileName.c_str()) + "_" + latticeType;
        outMdFileName = outPrefix + ".md";

        //creat new .md file on fly which corrects the number of molecule     
        createMdFile(inputFileName, outMdFileName, numMol);
        std::cerr
            << "SimpleBuilder Error: the number of molecule and the density are not matched"
            << std::endl;
        std::cerr << "A new .md file: " << outMdFileName
            << " is generated, use it to rerun the simpleBuilder" << std::endl;
        exit(1);
    }

    //determine the output file names  
    if (args_info.output_given)
        outInitFileName = args_info.output_arg;
    else
        outInitFileName = getPrefix(inputFileName.c_str()) + ".in";
    
    //creat Molocator
    locator = new MoLocator(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());

    //fill Hmat
    hmat(0, 0)= nx * latticeConstant;
    hmat(0, 1) = 0.0;
    hmat(0, 2) = 0.0;

    hmat(1, 0) = 0.0;
    hmat(1, 1) = ny * latticeConstant;
    hmat(1, 2) = 0.0;

    hmat(2, 0) = 0.0;
    hmat(2, 1) = 0.0;
    hmat(2, 2) = nz * latticeConstant;

    //set Hmat
    oldInfo->getSnapshotManager()->getCurrentSnapshot()->setHmat(hmat);

    //place the molecules

    curMolIndex = 0;

    //get the orientation of the cell sites
    //for the same type of molecule in same lattice, it will not change
    latticeOrt = simpleLat->getLatticePointsOrt();

    Molecule* mol;
    SimInfo::MoleculeIterator mi;
    mol = oldInfo->beginMolecule(mi);
    for(int i = 0; i < nx; i++) {
        for(int j = 0; j < ny; j++) {
            for(int k = 0; k < nz; k++) {

                //get the position of the cell sites
                simpleLat->getLatticePointsPos(latticePos, i, j, k);

                for(int l = 0; l < numMolPerCell; l++) {
                    if (mol != NULL) {
                        locator->placeMol(latticePos[l], latticeOrt[l], mol);
                    } else {
                        std::cerr << std::endl;                    
                    }
                    mol = oldInfo->nextMolecule(mi);
                }
            }
        }
    }

    //create dumpwriter and write out the coordinates
    oldInfo->setFinalConfigFileName(outInitFileName);
    writer = new DumpWriter(oldInfo);

    if (writer == NULL) {
        std::cerr << "error in creating DumpWriter" << std::endl;
        exit(1);
    }

    writer->writeDump();
    std::cout << "new initial configuration file: " << outInitFileName
        << " is generated." << std::endl;

    //delete objects

    //delete oldInfo and oldSimSetup
    if (oldInfo != NULL)
        delete oldInfo;

    if (writer != NULL)
        delete writer;

    return 0;
}

void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
                  int numMol) {
    ifstream oldMdFile;
    ofstream newMdFile;
    const int MAXLEN = 65535;
    char buffer[MAXLEN];

    //create new .md file based on old .md file
    oldMdFile.open(oldMdFileName.c_str());
    newMdFile.open(newMdFileName.c_str());

    oldMdFile.getline(buffer, MAXLEN);

    while (!oldMdFile.eof()) {

        //correct molecule number
        if (strstr(buffer, "nMol") != NULL) {
            sprintf(buffer, "\t\tnMol = %d;", numMol);
            newMdFile << buffer << std::endl;
        } else
            newMdFile << buffer << std::endl;

        oldMdFile.getline(buffer, MAXLEN);
    }

    oldMdFile.close();
    newMdFile.close();
}

Revision:	484
Committed:	Tue Apr 12 21:58:09 2005 UTC (20 years ago) by tim
Original Path:	*trunk/src/applications/simpleBuilder/simpleBuilder.cpp*
File size:	9328 byte(s)
Log Message:	refactory LatticeFactory and LatticeCreator
#	User	Rev	Content
1	gezelter	246	/*
2			* Copyright (c) 2005 The University of Notre Dame. All Rights Reserved.
3			*
4			* The University of Notre Dame grants you ("Licensee") a
5			* non-exclusive, royalty free, license to use, modify and
6			* redistribute this software in source and binary code form, provided
7			* that the following conditions are met:
8			*
9			* 1. Acknowledgement of the program authors must be made in any
10			* publication of scientific results based in part on use of the
11			* program. An acceptable form of acknowledgement is citation of
12			* the article in which the program was described (Matthew
13			* A. Meineke, Charles F. Vardeman II, Teng Lin, Christopher
14			* J. Fennell and J. Daniel Gezelter, "OOPSE: An Object-Oriented
15			* Parallel Simulation Engine for Molecular Dynamics,"
16			* J. Comput. Chem. 26, pp. 252-271 (2005))
17			*
18			* 2. Redistributions of source code must retain the above copyright
19			* notice, this list of conditions and the following disclaimer.
20			*
21			* 3. Redistributions in binary form must reproduce the above copyright
22			* notice, this list of conditions and the following disclaimer in the
23			* documentation and/or other materials provided with the
24			* distribution.
25			*
26			* This software is provided "AS IS," without a warranty of any
27			* kind. All express or implied conditions, representations and
28			* warranties, including any implied warranty of merchantability,
29			* fitness for a particular purpose or non-infringement, are hereby
30			* excluded. The University of Notre Dame and its licensors shall not
31			* be liable for any damages suffered by licensee as a result of
32			* using, modifying or distributing the software or its
33			* derivatives. In no event will the University of Notre Dame or its
34			* licensors be liable for any lost revenue, profit or data, or for
35			* direct, indirect, special, consequential, incidental or punitive
36			* damages, however caused and regardless of the theory of liability,
37			* arising out of the use of or inability to use software, even if the
38			* University of Notre Dame has been advised of the possibility of
39			* such damages.
40			*/
41
42	tim	12	#include <cstdlib>
43			#include <cstdio>
44			#include <cstring>
45			#include <cmath>
46			#include <iostream>
47			#include <string>
48			#include <map>
49			#include <fstream>
50
51			#include "applications/simpleBuilder/simpleBuilderCmd.h"
52	gezelter	481	#include "lattice/LatticeFactory.hpp"
53			#include "utils/MoLocator.hpp"
54			#include "lattice/Lattice.hpp"
55	gezelter	246	#include "brains/Register.hpp"
56			#include "brains/SimInfo.hpp"
57			#include "brains/SimCreator.hpp"
58			#include "io/DumpWriter.hpp"
59			#include "math/Vector3.hpp"
60			#include "math/SquareMatrix3.hpp"
61			#include "utils/StringUtils.hpp"
62	tim	12
63			using namespace std;
64	gezelter	246	using namespace oopse;
65			void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
66			int numMol);
67	tim	12
68	gezelter	246	int main(int argc, char *argv []) {
69	tim	12
70	gezelter	246	//register force fields
71			registerForceFields();
72	tim	484	registerLattice();
73	gezelter	246
74			gengetopt_args_info args_info;
75			std::string latticeType;
76			std::string inputFileName;
77			std::string outPrefix;
78			std::string outMdFileName;
79			std::string outInitFileName;
80			BaseLattice *simpleLat;
81			int numMol;
82			double latticeConstant;
83			std::vector<double> lc;
84			double mass;
85			const double rhoConvertConst = 1.661;
86			double density;
87			int nx,
88			ny,
89			nz;
90			Mat3x3d hmat;
91			MoLocator *locator;
92			std::vector<Vector3d> latticePos;
93			std::vector<Vector3d> latticeOrt;
94			int numMolPerCell;
95			int curMolIndex;
96			DumpWriter *writer;
97	tim	12
98	gezelter	246	// parse command line arguments
99			if (cmdline_parser(argc, argv, &args_info) != 0)
100			exit(1);
101	tim	12
102	gezelter	246	density = args_info.density_arg;
103	tim	12
104	gezelter	246	//get lattice type
105			latticeType = UpperCase(args_info.latticetype_arg);
106	tim	12
107	gezelter	246	if (!LatticeFactory::getInstance()->hasLatticeCreator(latticeType)) {
108			std::cerr << latticeType << " is an invalid lattice type" << std::endl;
109			std::cerr << LatticeFactory::getInstance()->toString() << std::endl;
110			exit(1);
111			}
112	tim	12
113	gezelter	246	//get the number of unit cell
114			nx = args_info.nx_arg;
115	tim	12
116	gezelter	246	if (nx <= 0) {
117			std::cerr << "The number of unit cell in h direction must be greater than 0" << std::endl;
118			exit(1);
119			}
120	tim	12
121	gezelter	246	ny = args_info.ny_arg;
122	tim	12
123	gezelter	246	if (ny <= 0) {
124			std::cerr << "The number of unit cell in l direction must be greater than 0" << std::endl;
125			exit(1);
126			}
127	tim	12
128	gezelter	246	nz = args_info.nz_arg;
129	tim	12
130	gezelter	246	if (nz <= 0) {
131			std::cerr << "The number of unit cell in k direction must be greater than 0" << std::endl;
132			exit(1);
133			}
134	tim	12
135	gezelter	246	//get input file name
136			if (args_info.inputs_num)
137			inputFileName = args_info.inputs[0];
138			else {
139			std::cerr << "You must specify a input file name.\n" << std::endl;
140			cmdline_parser_print_help();
141			exit(1);
142			}
143	tim	12
144	gezelter	246	//parse md file and set up the system
145			SimCreator oldCreator;
146			SimInfo* oldInfo = oldCreator.createSim(inputFileName, false);
147	tim	12
148	gezelter	246	if (oldInfo->getNMoleculeStamp()>= 2) {
149			std::cerr << "can not build the system with more than two components"
150			<< std::endl;
151			exit(1);
152			}
153	tim	12
154	gezelter	246	//get mass of molecule.
155	tim	12
156	gezelter	246	mass = getMolMass(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
157	tim	12
158	gezelter	246	//creat lattice
159			simpleLat = LatticeFactory::getInstance()->createLattice(latticeType);
160	tim	12
161	gezelter	246	if (simpleLat == NULL) {
162			std::cerr << "Error in creating lattice" << std::endl;
163			exit(1);
164			}
165	tim	12
166	gezelter	246	numMolPerCell = simpleLat->getNumSitesPerCell();
167	tim	12
168	gezelter	246	//calculate lattice constant (in Angstrom)
169			latticeConstant = pow(rhoConvertConst * numMolPerCell * mass / density,
170			1.0 / 3.0);
171	tim	12
172	gezelter	246	//set lattice constant
173			lc.push_back(latticeConstant);
174			simpleLat->setLatticeConstant(lc);
175	tim	12
176	gezelter	246	//calculate the total number of molecules
177			numMol = nx * ny * nz * numMolPerCell;
178	tim	12
179	gezelter	246	if (oldInfo->getNGlobalMolecules() != numMol) {
180			outPrefix = getPrefix(inputFileName.c_str()) + "_" + latticeType;
181			outMdFileName = outPrefix + ".md";
182
183			//creat new .md file on fly which corrects the number of molecule
184			createMdFile(inputFileName, outMdFileName, numMol);
185			std::cerr
186			<< "SimpleBuilder Error: the number of molecule and the density are not matched"
187			<< std::endl;
188			std::cerr << "A new .md file: " << outMdFileName
189			<< " is generated, use it to rerun the simpleBuilder" << std::endl;
190			exit(1);
191	tim	12	}
192
193	gezelter	246	//determine the output file names
194			if (args_info.output_given)
195			outInitFileName = args_info.output_arg;
196			else
197			outInitFileName = getPrefix(inputFileName.c_str()) + ".in";
198
199			//creat Molocator
200			locator = new MoLocator(oldInfo->getMoleculeStamp(0), oldInfo->getForceField());
201	tim	12
202	gezelter	246	//fill Hmat
203			hmat(0, 0)= nx * latticeConstant;
204			hmat(0, 1) = 0.0;
205			hmat(0, 2) = 0.0;
206	tim	12
207	gezelter	246	hmat(1, 0) = 0.0;
208			hmat(1, 1) = ny * latticeConstant;
209			hmat(1, 2) = 0.0;
210	tim	12
211	gezelter	246	hmat(2, 0) = 0.0;
212			hmat(2, 1) = 0.0;
213			hmat(2, 2) = nz * latticeConstant;
214	tim	12
215	gezelter	246	//set Hmat
216			oldInfo->getSnapshotManager()->getCurrentSnapshot()->setHmat(hmat);
217	tim	12
218	gezelter	246	//place the molecules
219
220			curMolIndex = 0;
221
222			//get the orientation of the cell sites
223			//for the same type of molecule in same lattice, it will not change
224			latticeOrt = simpleLat->getLatticePointsOrt();
225
226			Molecule* mol;
227			SimInfo::MoleculeIterator mi;
228			mol = oldInfo->beginMolecule(mi);
229			for(int i = 0; i < nx; i++) {
230			for(int j = 0; j < ny; j++) {
231			for(int k = 0; k < nz; k++) {
232
233			//get the position of the cell sites
234			simpleLat->getLatticePointsPos(latticePos, i, j, k);
235
236			for(int l = 0; l < numMolPerCell; l++) {
237			if (mol != NULL) {
238			locator->placeMol(latticePos[l], latticeOrt[l], mol);
239			} else {
240			std::cerr << std::endl;
241			}
242			mol = oldInfo->nextMolecule(mi);
243			}
244			}
245			}
246	tim	12	}
247
248	gezelter	246	//create dumpwriter and write out the coordinates
249			oldInfo->setFinalConfigFileName(outInitFileName);
250	tim	376	writer = new DumpWriter(oldInfo);
251	tim	12
252	gezelter	246	if (writer == NULL) {
253			std::cerr << "error in creating DumpWriter" << std::endl;
254			exit(1);
255			}
256	tim	12
257	gezelter	246	writer->writeDump();
258			std::cout << "new initial configuration file: " << outInitFileName
259			<< " is generated." << std::endl;
260
261			//delete objects
262
263			//delete oldInfo and oldSimSetup
264			if (oldInfo != NULL)
265			delete oldInfo;
266
267			if (writer != NULL)
268			delete writer;
269
270			return 0;
271	tim	12	}
272
273	gezelter	246	void createMdFile(const std::string&oldMdFileName, const std::string&newMdFileName,
274			int numMol) {
275			ifstream oldMdFile;
276			ofstream newMdFile;
277			const int MAXLEN = 65535;
278			char buffer[MAXLEN];
279	tim	12
280	gezelter	246	//create new .md file based on old .md file
281			oldMdFile.open(oldMdFileName.c_str());
282			newMdFile.open(newMdFileName.c_str());
283	tim	12
284	gezelter	246	oldMdFile.getline(buffer, MAXLEN);
285
286			while (!oldMdFile.eof()) {
287
288			//correct molecule number
289			if (strstr(buffer, "nMol") != NULL) {
290			sprintf(buffer, "\t\tnMol = %d;", numMol);
291			newMdFile << buffer << std::endl;
292			} else
293			newMdFile << buffer << std::endl;
294
295			oldMdFile.getline(buffer, MAXLEN);
296			}
297
298			oldMdFile.close();
299			newMdFile.close();
300	tim	12	}
301	gezelter	246